Micro-Epsilon UK Ltd    Cheshire   United Kingdom
Dec 14, 2010 Available in 5 models with measuring range of 2-100 mm, optoNCDT 2300 offers resolution up to 0.1 µm and linearity up to +0.4 µm. Sensor records first and second reflection from target surface, eliminating need for second sensor during process monitoring of transparent plastics. By adjusting automatic exposure regulation to customer requirements, A-RTSC feature enables precise real-time surface compensation during measuring process. Data output is via Ethernet, RS422, or EtherCAT.

Micro-Epsilon UK Ltd    Cheshire   United Kingdom
Dec 13, 2010 Featuring integrated controller, thermoMETER CSlaser is available as 8-14 µm SF version with measuring range from -50 to 975°C for general tasks, and as 1.6 µm M-2 model with range of 385-1,600°C for applications in metalworking industry. Two-beam laser aiming feature marks actual spot size at any distance, eliminating faulty measurements on small objects. Capable of measuring at distances up to 150 mm, sensor has scalable 4-20 mA 2-wire analog output and alarm output.

Micro-Epsilon UK Ltd    Cheshire   United Kingdom
Dec 13, 2010 Modular thicknessCONTROL MTS 8202 features C-frame that can be extended with aid of linear axes. Featuring correction system that allows for micrometer precision, it measures thickness of strip materials such as metal, plastic, or wood, as well as materials in sheet form, up to 500 mm wide and up to 50 mm thick. Damaged sensors can be replaced, even in harsh environments, without disassembly, and integrated calibration can analyze precision of system in less than 1 sec.

Emerson Process Management    Pleasanton, CA 94566
Dec 13, 2010 Model CSI 6500 is available with A6630 temperature module, which complements vibration monitoring capabilities by delivering critical bearing temperature measurements. Module A6630 accepts RTD and thermocouple signals directly, reducing installation efforts. In keeping with API 670 specification, A6630 has 6 or fewer channels per module, 4-20 mA outputs, and relay logic for voting and automatic machine trips.

PCB Piezotronics Inc.    Depew, NY 14043 2495
Dec 10, 2010 Compriised of 2-wire, loop powered vibration sensors, Series 640 is used for monitoring motors and pumps at natural gas pipeline pumping stations. Design meets natural gas industry design requirements, including certification in accordance with ATEX and CSA for use in hazardous areas. Powered by 12-30 Vdc source, products offer 4-20 mA output signal proportional to overall vibration level of machine being monitored. Output wire can be connected to existing PLC, DCS, and SCADA systems.

Dwyer Instruments, Inc.    Michigan City, IN 46361
Dec 10, 2010 Through 1/8 in. female NPT pressure connections, Series PFG2 determines pressure drop on either side of filter and relates value to green for clean, yellow for change, or red for dirty. Unit features temperature limit of 200°F, pressure limit of 300 psig, and ±5% full scale accuracy. Constructed with glass-filled nylon body and aluminum mounting block, gage is suited for filter applications, line loss, valve drop, and other differential pressure applications.

Dytran Instruments, Inc.    Chatsworth, CA 91311
Dec 10, 2010 Comprised of 3 accelerometers with 10, 100, and 500 mV/g sensitivities, 3305A series comes in 0.40 in.³ laser welded titanium housing that is hermetically sealed for reliable operation in humid and dirty environments. IEPE-type piezoelectric accelerometers, featuring ceramic shear sensing element coupled to JFET electronics, weigh 3.7 g and offer industry standard 10-32 radial connector. Flat surface allows for adhesive mounting.

Vishay Intertechnology, Inc.    Malvern, PA 19355 2143
Dec 10, 2010 Optimized for applications in harsh environments, 34 THE sensor features non-contacting technology, has rated life of 50 million cycles with servo mount, and 10 million cycles with bushing mount. Hall effect technology enables performance in conditions involving high-frequency vibrations to 20 G and shocks to 50 G. Any specific angle is available upon customer request inside 3,600° max limit, and various output signal types are offered depending on requirements.

Mid-West Instrument    Sterling Heights, MI 48314
Dec 09, 2010 Featuring CSA, UL, and ATEX rated sensor, explosion-proof Model 220 provides loop-powered, 828 Vdc, 2-wire, 4-20 mA transmitter option with industrial type terminal strip and cast aluminum housing. Piston-operated unit offers differential ranges from 0-5 psid to 0-100 psid with accuracy of ±2% from 20-100% of full scale. Equipped with 4½ in. dial and shatter-resistant lens, weatherproof gauge has safe working pressure of 4,000 psig with full over-range protection.

Baumer Ltd.    Southington, CT 06489 1534
Dec 09, 2010 Measuring 4.7 x 8 x 16 mm, IWFM 08 Series of Inductive Sensors offer resolutions of less than 0.001 mm at sensing distances up to 2 mm. They feature 0-10 V output, allowing them to be directly connected to analog outputs of control system. Units mount in restricted spaces, are IP67-rated, and have die-cast zinc/nickel-plated housings that prevent damage during installation and operation. Various factory automation and assembly/handling applications are supported.

Lancope    Alpharetta, GA Georgia 30022
Dec 09, 2010 Suited for healthcare institutions, government agencies, and retailers, StealthWatch FlowSensor 250 appliance enables Layer 7 application monitoring to maximize network visibility into branch offices and remote locations. By gathering packet-level metrics to monitor all network communications, appliance cuts mean-time-to-know for identifying and troubleshooting network issues. StealthWatch provides borderless network visibility to isolate root cause and restore performance.

Elecsys Corporation    Olathe,, KS 66061
Dec 09, 2010 Watchdog VIP includes Elecsys Watchdog Web Monitor that allows secure access to measurements and provides web-based remote control of measurement ranges, configurations, and alarm notification settings. Product features 4 configurable analog inputs, one digital input, and AC power detection probe. Deployable worldwide, it communicates via quad-band GSM/GPRS cellular telemetry or Inmarsat global satellite system and suits corrosion protection monitoring applications.

Comdel, Inc.    Gloucester, MA 01930
Dec 09, 2010 Arc Detect Fast Shutdown provides shutdown of RF to minimize arc damage within CPMX matching networks and CX power supplies. Specifically, 1.5 µsec latching fast shutdown located in power supply interfaces with arc detect circuit in matching network, allowing automatic fast shutdown of RF during arc condition to minimize damage on end-user tooling and product. Integrated system promotes product yield while also protecting process equipment.

Transducers USA    Elk Grove Village, IL 60007
Dec 08, 2010 Delivering 105+ dB over voltage range up to 150 V @ 30 mA, KPEG-1600 uses Helmholz formula to maintain maximum output despite harmful harsh outside elements. Sealed and rugged construction promotes consistent performance, even in off-road equipment applications, outdoor testing, and marine and air devices. Measuring 53 x 25 mm, products meet all RoHS protection regulations and features sealed wire lead terminals that lend to extended life.

Trimble Navigation Limited    Sunnyvale, CA 94085-3913
Dec 08, 2010 Designed for environmental consultants and landfill operations managers, SiteFID(TM) integrates positioning and mobile computing capabilities coupled with Flame Ionization Detection (FID) gas sensor technology. End-to-end solution helps streamline workflow for mobile workers as well as improve accuracy and compliance while on site. Field samples, recorded with GPS coordinates in real-time during field survey, may be transferred from handheld to back-office compliance applications.

Emerson Process Management    Pleasanton, CA 94566
Dec 07, 2010 Intended for SIL 2 safety instrumented systems, Rosemount® 2130 does not require on-site calibration and has built-in fault monitoring/self diagnostics for detecting extreme corrosion of forks and any other internal or external damage to fork sensor. Rosemount 2130 operates in -94 to +500°F temperatures and is available with 316L stainless steel as standard, ECTFE/PFA copolymer coated 316L stainless steel, or corrosion resistant alloy C wet side as well as choice of electronic output types.

Sensirion Inc.    Westlake Village, CA 91361
Dec 07, 2010 With 0-3,500 Pa measuring range, fully calibrated and temperature-compensated SDP2108-R offers 8 msec response time and analog output signal with 0-4 V range. Root square output enables measurements at minimal differential pressure (DP) levels, while simultaneously allowing coverage wide dynamic measurement range. Sensor utilizes thermal flow measurement and exhibits freedom from zero point drift.

Enmet Corp.    Ann Arbor, MI 48106
Dec 07, 2010 ATEX-certified and CE-approved PGD3-IR incorporates infrared combustible gas sensor for 0-100% LEL or 0-100% by volume methane detection and IR sensor for CO2 at optional ranges from ppm concentrations to 100% by volume. Offered in rugged enclosure with protective rubber boot and IP66 ingress protection, instrument can also be supplied with oxygen sensor and up to 2 electrochemical sensors for various toxic gases. Audio/visual alarms and complete data logging capability are standard.

BugLab LLC    Danville, CA 94526
Dec 07, 2010 Used for directly measuring optical density (OD) through walls of shake flasks and other small vessels, OD Scanner eliminates need to open containers as well as labor, contamination risk, and inaccuracy associated with sampling and dilution. Measurement is reported within 3 sec after user points scanner into flask, only 1 cm of fluid is required to be present. Scanner directly reports optical densities from 0.1-50 across 125-2,000 mL vessels made of materials glass, PC, and PET.

American Sensor Technologies, Inc.    Mt. Olive, NJ 07828
Dec 06, 2010 Able to measure line pressures up to 2,000 psi with turndown ratio of 15:1, AST5400 wet/wet differential pressure sensor uses Krystal Bond(TM) Technology and has no silicone oil, O-rings, or welds. MEMS pressure sensor technology completely isolates media to pressure ports, eliminating contamination risk. Able to be installed into systems without 5-way equalization valves, sensor also incorporates digital compensation and fail safe condition on output signal.