IMI Sensors, Div. of PCB Piezotronics    Depew, NY 14043-2495
Jul 12, 2012 Comprising Echo® Wireless Vibration Sensors, EchoPlus® Wireless Junction Box, plus receiver and software, Echo® Vibration Monitoring System uses Extended Range Radio Frequency technology and requires no gateways, mesh, or repeaters. System transmits at 0.75 mW Effective Radiated Power in unlicensed 900 MHz band and does not interfere with other wireless communications. Transmitted data set features overall vibration measurements scaled in acceleration, velocity, true peak, and crest factor.

Brüel & Kjær    Norcross, GA 30071-1588
Jul 12, 2012 Able to measure vibration in harsh industrial environments, Type 8347-C piezoelectric charge accelerometer comes in hermetically sealed housing of INCONEL® alloy and withstands temperatures from -321 to +900°F. Shear design lends to thermal stability, and transducer is individually calibrated using random excitation and 1600-line FFT. Profile of 20 mm suits confined spaces in applications such as gas turbines, aircraft engines, turbo pumps, and health and usage monitoring systems.

Newport Corporation    Irvine, CA 92606
Jul 12, 2012 Ranging in size from 2-5.3 in., Series 819C/D is calibrated, NIST-traceable, and available for diverging/collimated input beams. Spheres use 3 sensor materials: Si for 400-1,100 nm detection, UV-enhanced Si for 200-400 nm, and InGaAs for 800-1,650 nm wavelength range. Featuring built-in temperature sensor and OD1 attenuator sensor, CAL2 models automatically recognize attenuator on/off position and detector head temperature when connected to power meters.

Meggitt (Maryland), Inc.    Germantown, MD 20876
Jul 11, 2012 Designed for both route-based and permanent mount applications, Model 993B-7-M12 hosts 3 general purpose 100 mV/g vibration sensors with ±10% sensitivity tolerance. Unit features frequency range from 2-10,000 Hz on Z axis and 2-7,000 Hz on X and Y axes. Individual channel amplifiers minimize influence of out of band signals. Available with straight, coiled, and Teflon® coated cable options, Model 993B-7-M12 includes M12 connector and thick shell for resistance to impact.

TempTRIP LLC    Broomfield, CO 80021
Jul 10, 2012 To meet data recording needs for pharmaceutical products, TempTRIP® time/temperature monitoring system offers full turnkey solution for cold chain compliance and enables information to be viewed from different locations/companies. Ordering, configuration, viewing, sharing, integration, and data management are possible via Internet browser. Monitoring process involves temperature logging cards with optional LED display and optional RFID reader with or without integrated barcode scanner.

Balluff, Inc.    Florence, KY 41042-0937
Jul 10, 2012 Global BMF series includes sensors based on non-contact, solid-state technology compatible with reed and Hall-Effect magnetic pole orientations, making them suitable replacement for standard magnetic switches. Featuring short circuit, overload, and reverse polarity protections, products fit C- or T-slot extrusions and require no additional brackets for mounting. Flush-fitting sensors come with cable clips for clean cable routing and strain relief.

Measurement Specialties, Inc.    Hampton, VA 23666
Jul 10, 2012 Delivering stability of ±0.05°C per 12 months, KPSI 380 uses SDI-12 or RS-485 serial-digital interface and operates from 6-28 Vdc supply. IP68 and NEMA 6P rated digital device, supporting use of multiple sensors with single data recorder, is certified to numerous CE qualifications (EN 61000) and features Nickel RTD and ASIC chipset sensors. Construction includes welded 316 stainless steel body, Delrin nosepiece, and custom length polyurethane cable.

Cyberoptics Semiconductor, Inc.    Beaverton, OR 97075 0276
Jul 10, 2012 Designed to meet future fab requirements, AVS450 Wireless Auto Vibration System travels through entire path of wafer to measure vibrations of wafer transfers in X, Y, and Z dimensions during semiconductor processes and fabrications. System reports real-time acceleration data so engineers can identify vibration anomalies. With Model AVS450, users can observe and optimize wafer, cassette, SMIF, and FOUP motions without exposing process areas to environment.

Solmetric Corporation    Sebastopol, CA 95472
Jul 10, 2012 Combining I-V curve tracing with built-in, predictive PV models, PV Analyzer provides complete performance verification for commissioning and troubleshooting PV arrays. Included v2.0 software, optimized for usability, features underlying Project file that contains instrument settings, PV models, and measurement data for particular PV installation. Other software features include Project Wizard(TM), interactive system tree, and History tab that retains up to 20 recent measurements.

NK Technologies    Campbell, CA 95008
Jul 10, 2012 Combining limit alarm with analog output signal transducer, ATS Series monitors produced or consumed AC current up to 1,200 A, while magnetically isolating outputs and inputs to maximize safety. Rotary switch enables user to set trip point, while DIN rail mounting facilitates installation and provides secure mount that is resistant to conductor movement. With single self-contained current switch, users can monitor air handling blowers, pumps, crushers, and other large loads.

Touchstone Semiconductor    Milpitas, CA 95035
Jul 09, 2012 Specified from -40 to +85°C, TS12001 combines 0.58 V reference and resettable latched comparator in 10-pin, 2 x 2 mm TDFN package. Internal comparator exhibits ±10 mV of hysteresis for clean, chatter-free output switching. Operating from one 0.65-2.5 V power supply, device consumes less than 1 µA total supply current and produces reset signal whenever monitored voltage drops below internally preset 0.78 V threshold or external, resistor-programmable reset threshold voltage.

Baumer Ltd.    Southington, CT 06489 1534
Jul 09, 2012 Incremental hollow shaft encoders of HS35F series are available with integrated enhanced monitoring system (EMS) that signals potential failure of encoder. Designed to provide positioning/speed control and endure mechanical strain, series improves safety and reliability of heavy-duty processing lines while minimizing downtime. Encoders are available for 0.5-1.0 in. dia shafts and can be customized with shaft insert adapters that provide 2.5 kV max electrical isolation.

Inventa Australia Pty. Ltd    Ultimo NSW 2007  Australia
Jul 06, 2012 With multiple video I/O and MPEG codec ICs and application/SDK software, MPEGIO2 encodes/decodes multichannel, full D1 video and always synchronized audio in real-time. Functions include color text/graphics overlay, picture-in-picture encoding, multi-pin DIO control, PAL and NTSC conversion, live video preview, low-latency video streaming, and seamless recording file splitting. Product encodes/compresses MPEG4/2/1 video, without involving PC CPU, at bit rates from 15 Mbps to 128 Kbps.

Symmetricom Inc.    San Jose, CA 95131
Jul 06, 2012 Respectively intended for residential and enterprise small cells, SCr and SCe SoftClocks allow small cell designers to execute single base design with options to integrate one or more synchronization protocol for deployment in varied network topologies. These embedded timing and synchronization solutions support multiple timing protocols - IEEE 1588 (PTP), network time protocol (NTP), softGPS - and leverage existing hardware resources in system design to support variety of backhaul types.

Anritsu Co.    Richardson, TX 75081
Jul 05, 2012 Providing return loss, cable loss, and Distance-to-Fault measurements, Site Master S331L features sweep speed per data point of 1.5 msec, accelerating identification of intermittent problems in real-time. Built-in InstaCal(TM) provides one-connection calibration anytime, while built-in power meter enables testing of RF power in field environments. Dust- and splash-resistant with 7 in. backlit TFT touchscreen, analyzer provides 8 hours of continuous battery life.

Pepperl+Fuchs    Twinsburg, OH 44087
Jul 05, 2012 Model CVM42H CANopen Multi-Turn Absolute Encoder uses magnetic sampling, to deliver 24-bit resolution position value, and to maximize reliability under high mechanical stress. It offers axial and radial shaft load capacity to 270 N, while being vibration resistant to 30 G and shock resistant to 300 G. Rated for use in operating temperatures from -40 to +185°F, encoder is available with IP66, IP68, or IP69K environmental rating.

ASM Sensors, Inc.    Elmhurst, IL 60126
Jul 05, 2012 Resistant to vibration, humidity, and shock, POSICHRON® PCST27 series comprises probe sensors that allow for precise positioning of hydraulic cylinders or measurement of fluid levels. Rod-profile design facilitates installation and promotes precision detection, even under difficult conditions. Comprised of magnetostrictive waveguide and movable position magnet, sensors offer absolute output, with linearity of up to ±0.02% FS, and measurement lengths of 0-100 or 0-5,750 mm.

CAS Data Loggers    Chesterland, OH 44026
Jul 05, 2012 By constantly sampling each data cycle multiple times, Electrocorder EC-7VAR 3-Phase Voltage and Current Logger Kit enables user to identify single- and 3-phase problems over a few days of recording. Datalogger records both power and energy usage, identifies related issues by checking voltage and current variations, and allows users to view onsite power consumption in kilowatt hours. Available in 4 models that record at ranges from 4 A to 3 kA, kit includes software for data analysis.

RheoSense, Inc.    San Ramon, CA 94583
Jul 05, 2012 Mounted on m-VROC viscometer, E chip attains 2,000,000 1/s measurements of water-like viscosity or 1,000,000 1/s for various injket inks (~4 mPas). Defined, micro-fabricated uniform flow channel maintains laminar flow at elevated shear rates, producing accurate measurements. Viscosity measurement is further facilitated by full scale pressure of chip.

Bruker Corporation    Tucson, AZ 85756
Jul 05, 2012 Electrochemical accessory adds sealed cell, designed for Li battery atomic force microscopy research and 1 ppm environmental control, to Dimension Icon® AFM platform. Product uses Peak Force Tapping® for fluid imaging and to track nanoscale electrode changes during charging cycle. Inert Teflon and Kel-F cell bodies with sealed chamber support long-term electrode studies. Featuring cup-shaped design, unit allows connection independent from counter-electrode assembly and disassembly.