SPO Medical, Inc.    Simi Valley, CA 93065
Dec 07, 2007 Suited for use by medical professionals, hospitals, and managed care facilities, PulseOx 6000(TM) and PulseOx 6100(TM) are finger and hand held devices, respectively, that use Reflective Pulse Oximetry technology for measurements of blood oxygen saturation and heart rate. Units include AutoSpot(TM) technology for patients suffering low perfusion.

Nanmac Corp.    Framingham, MA 01702 2469
Dec 06, 2007 Suitable for use in research and industry applications, F11-40 Series is designed to fit all thermocouples and RTDs. It has no dip switches, jumpers, or solder points and can transmit full sensor range or be scaled to any specification. Factory-calibrated solution employs loop-power with 4-20 mA outputs and can be rail- or head-mounted. In-head LCD is optional.

Measurement Computing Corp.    Norton, MA 02766
Dec 06, 2007 Ethernet-compatible WEB-TEMP and WEB-TC let users take temperature measurements and monitor them via Internet. Both feature built-in web servers that write temperature data to their own webpage, were users can access information and configure sensors. WEB-TEMP provides 8 temperature input channels, each supporting all common temperature sensors, and 8 bits of DIO. WEB-TC offers similar functionality but only supports thermocouple sensors.

Novotechnik U.S., Inc.    Southborough, MA 01772
Dec 06, 2007 Suited for mobile and harsh environments, RSC Series features non-contact technology with rotating shaft, while Vert-x E Series has no shaft, but includes round position marker that mounts separately from detecting sensor component. Sensors offer programmable angular range to 360° and resolution to 14 bits. They range from miniature units measuring 13 mm dia for use in tight applications to rugged 48 mm rotary angle models sealed up to IP69K for adverse conditions.

Moore Industries International, Inc.    North Hills, CA 91343
Dec 06, 2007 Requiring 10.5 mA to operate, programmable Model TFZ allows up to 32 field devices (126 with repeaters) to be networked onto one FOUNDATION Fieldbus H1 segment. It has 20-bit input resolution, RFI/EMI protection, ambient temperature compensation, and operates in -40 to +85°C temperatures. Rated NEMA 4X/IP66, TFZ can be set from control room over segment wiring to handle 14 RTD types, 9 thermocouple types, as well as direct mV and resistance/potentiometer inputs.

Crystal Engineering    San Luis Obispo, CA 93403
Dec 05, 2007 Intrinsically safe and ATEX certified, wet/wet Model XP2i-DP features burst disc that protects sensor from over-pressure on low side connection. Digital gauge provides datalogging capabilities and can be programmed for custom engineering units. Available in panel mounting and portable configurations, unit is tested and calibrated inside environmental test chambers using computer-controlled pressure controllers.

Dwyer Instruments, Inc.    Michigan City, IN 46361 0373
Dec 05, 2007 Usable as dust collector emissions monitor and leak detector, standard Series PMT is designed for general maintenance planning and process protection applications. Adjustable linear or logarithmic output scaling enables trending of baseline and high peak emissions that are caused by filter cleaning cycles and developing leaks. Protective layers on probe work with induction-sensing to ensure reliable operation with all types of particulate.

Kistler Instrument Corp.    Amherst, NY 14228 2119
Dec 05, 2007 Designed for measuring forces and moments on tires for trucks and other heavy goods vehicles, RoaDyn® S6HT TT (Tire Testing) is rotating 6-component measuring system for wheel and tire test that can be used like measuring hub. It offers measuring range of up to 220 and 100 kN in radial and axial direction, respectively. Modified outer part with different bolt patterns and adapter flange allows standard wheels to be mounted.

Honeywell    Golden Valley, MN 55422 3935
Dec 04, 2007 OneWireless(TM) Equipment Health Monitoring (EHM) transmits complete spectral information, including vibration amplitude and operating parameter data, from field to plant control room. This 8-channel (4x vibration, 4x 4-20 mA) device communicates over OneWireless industrial mesh network, collecting acceleration, velocity, temperature, and bearing condition data for delivery to process operators and maintenance personnel to alert them of equipment problems.

austriamicrosystems AG    Premstatten   Austria
Dec 03, 2007 Combining Hall elements and signal processor on one silicon chip, Model AS5305 provides linear position measurement via single- or double-track multi-pole magnetic strip sliding over IC. Unit supports magnetic strips with pole-pair dimensions between 2.26 and 5.91 mm. In conjunction with multi-pole magnetic ring, IC can also be used as off-axis device for rotational measurements. Housed in lead-free TSSOP20 package, device operates at 5 V over -40 to +125°C ambient temperature.

Contrinex, Inc.    Lombard, IL 60148
Dec 03, 2007 Supplied in 16 mm long, AISI 303 stainless steel housing, 620 series sensor features built-in amplifier and operating distance of 2 mm. Sensing range is completely stable from -25 to +70°C, and max switching speed is 3 kHz. Suited for embedding into machines and assembly fixtures, sensor is protected to IP67 and can be flush mounted. Unit is fitted with LED operation indicator and includes short circuit, inverse polarity, and surge protection.

LEM Holding SA    Plan-les-Ouates CH-1228  Switzerland
Dec 03, 2007 Measuring 174 x 86 x 54.1 mm, DH Series split-core transducers combine Hall-effect technology and signal conditioning in one housing with rectangular sensing aperture for non-contact measurement (supporting up to 104 x 40 mm busbars or 40 mm cables). Products offer choice of primary current measurement from 500-2,000 A and provide absolute accuracy of better than 1% of nominal current value. Bipolar measurement value is delivered via 4-20 mA output.

RAE Systems    San Jose, CA 95134
Nov 30, 2007 Offering measurement range of 0-5,000 ppm and response time under 3 sec, MiniRAE Lite is intended for outdoor environmental and construction site use where hydrocarbon-based VOCs and chemicals pose toxic threat. Waterproof, nonintrinsically safe unit has 3-button interface that can be operated by users wearing up to 3 layers of gloves. Humidity compensation accommodates rapidly changing environments, and backlit graphical display ensures viewable readings in any light condition.

Automation Products Group, Inc.    Logan, UT 84321
Nov 30, 2007 Equipped with vented, watertight cable, PT-500 Series delivers 4-20 mA solid-state signal while submerged up to 450 ft. Removable stainless steel cage connects to sensor with snap ring and enables use in harsh environments. IP68-protected transmitters are temperature compensated and tested to deliver accuracy of 0.50% of span. Installed with surface mount technology, sensors are suited for sewage lift stations, tank liquid level measurement, water and wastewater.

MTS Systems Corp. - Sensor Div.    Cary, NC 27513
Nov 29, 2007 Communicating via Modbus interface, Side Tank Indicator works with Level Plus® MG transmitter to display product only, product and temperature, or product, interface, and temperature. Outputs from transmitter are communicated via 4-wire multi-drop power and data bus. Display can show measurement in feet, inches to 1/16 in., and temperature to 1 decimal point. Available with explosion-proof housing, display includes 2 relays, 4-20 mA output, 120/240 Vac input power, and 24 Vdc to gauge.

Bronkhorst High-Tech BV    NL-7261 AK   Netherlands
Nov 29, 2007 Featuring modular design rated to IP65, IN-PRESS meters are available in forward/back pressure control styles. They can be combined with close-coupled control valves to form digital pressure controllers, whereby pressure ranges are measured and controlled within range of 0-100 mbar up to 0-400 bar. ATEX-approved for use in Category 3, Zone 2 hazardous areas, meters offer analog I/O signals, RS232 connection, as well as integrated PID Control and various alarm and diagnostic functions.

Dwyer Instruments, Inc.    Michigan City, IN 46361 0373
Nov 28, 2007 Series WWDP Wet-to-Wet Differential Pressure Transducers provide total of 30 field-selectable variations which include unidirectional and bidirectional pressure ranges; configurable 0-5, 1-5, and 0-10 Vdc; and 4-20 mA output. They also provide auto-zero capability and include field-selectable port swap feature. With all cast aluminum housing and NEMA 4 rating, transducers are available with optional LCD for on-site indication of line and differential pressure.

Acro, Inc.    Fennville, MI 49408
Nov 28, 2007 Featuring pen-like design, ACRO-N.E.T Nitro Explosive Tester is capable of identifying majority of explosives in use, such as TNT, Tetryl, TNB, picric acid, dynamite, RDX, PETN, nitrocellulose smokeless powder, C4, and Semtex. In addition to military and commercial explosives, unit can also detect homemade explosives based on nitrate.

Saelig Co., Inc.    Pittsford, NY 14534
Nov 27, 2007 Housed in SOT-23 package, single-channel Model QT102 combines toggle mode on/off switch with hardware-programmable, auto-switch-off/override/reset capability. Unit can provide immediate shut-off in case of system malfunction. Running mostly in low-power mode, IC switches temporarily to high-power, fast mode once touch is detected, guaranteeing typical consumption of 37 µA at 3 V. Detect integrator suppresses detection generated by electrical noise or unintentional contact with object.

Dalsa Corp.    Waterloo N2V 2E9  Canada
Nov 27, 2007 Full-frame, monochrome CCD sensors feature 12 micron pixel with optimized light sensitivity. Models FTF3041M (12 megapixel) and FTF3021M (6 megapixel) offer choice between 2 high-speed dual-output registers employing different output amplifiers to achieve high signal conversion gain or max full-well capacity for optimal SNR during long exposure times. Also available, 4 megapixel FTF2021M features 4 identical outputs supporting single, dual, or quad parallel output.