Emerson Process Management / Process Liquid Division / Uniloc Division    Irvine, CA 92606
Dec 10, 2007 Compatible with Model 1056 Intelligent Analyzer, Model 410VP PUR-Sense 4-electrode sensor provides linearity between 0.1 µSiemen/cm to 600 mSiemen/cm. Alternating current is injected through outer electrodes while analyzer measures voltage across inner electrodes. Integrated Pt1000 RTD makes contact with process liquid through SS capsule flush with sensing face. Sanitary connections include 1.5 in. tri-clamp, 2 in. tri-clamp, Ingold G1-¼, or Varivent® Process Connection.

Vectron International    Hudson, NH 03051
Dec 10, 2007 Suited for in-situ viscosity measurements, ViSmart(TM) sensors can correlate to data acquired from lab instrumentation for real-time, inline oil condition monitoring applications. Universal plug-n-play connectivity enables integration with and into other handheld products. Complimenting IR spectroscopy and other bulk property sensors, solid-state solution exhibits accuracy levels from 91-99% and provides instantaneous on-line viscosity and temperature data.

Phoenix Display International, Inc.    Tempe, AZ 85283
Dec 10, 2007 Model PDI-T320240SR-5.7 sunlight-readable 5.7 in. TFT features 320 x 240 pixel resolution and is available with or without touchscreen. Illuminated with high-intensity white LEDs, it offers brightness of 300 cd/m², contrast ratio of 400:1, and response time of 15 ms. Device also utilizes HX8218A and HX8615A drivers. TFT cell is manufactured using high-aperture panel technology, high transmittance color filters, and anti-reflective polarizer scheme.

Imsys Technologies AB    SE-194 61 Upplands Väsby   Sweden
Dec 10, 2007 Addressing IEEE 1588 clock synchronization standard, IM3220-BA10 MCU and single board reference module deliver telecom, ITU G.8261, compliance. Microcontroller measures 24 x 45 mm, and user-programmable on-chip microcode enables it to adapt to range of embedded applications. Able to analyze and act on gate level in real time, solution supports two 10/100 Ethernet ports, 3 UARTs with 920 kbps, I²C or SPI port, and 8 DMA channels with sustained 83 MB/s throughput.

Thermo Fisher Scientific    Waltham, MA 02454
Dec 10, 2007 TEOM Series 1405 comes in 4 models providing ome to three PM measurements, PM-10, PM-2.5 (Fine), and PM-Coarse (PM-10-2.5), and FDMS option is available to account for volatile and semi-volatile fraction. Each model is delivered with network-ready configuration with user interface that allows access to system and TEOM data, settings, and instrument conditions. System's default data output consists of a running 1 hr and 24 hr average mass concentration updated every 6 minutes.

SPO Medical, Inc.    Simi Valley, CA 93065
Dec 07, 2007 Suited for use by medical professionals, hospitals, and managed care facilities, PulseOx 6000(TM) and PulseOx 6100(TM) are finger and hand held devices, respectively, that use Reflective Pulse Oximetry technology for measurements of blood oxygen saturation and heart rate. Units include AutoSpot(TM) technology for patients suffering low perfusion.

Nanmac Corp.    Framingham, MA 01702 2469
Dec 06, 2007 Suitable for use in research and industry applications, F11-40 Series is designed to fit all thermocouples and RTDs. It has no dip switches, jumpers, or solder points and can transmit full sensor range or be scaled to any specification. Factory-calibrated solution employs loop-power with 4-20 mA outputs and can be rail- or head-mounted. In-head LCD is optional.

Measurement Computing Corp.    Norton, MA 02766
Dec 06, 2007 Ethernet-compatible WEB-TEMP and WEB-TC let users take temperature measurements and monitor them via Internet. Both feature built-in web servers that write temperature data to their own webpage, were users can access information and configure sensors. WEB-TEMP provides 8 temperature input channels, each supporting all common temperature sensors, and 8 bits of DIO. WEB-TC offers similar functionality but only supports thermocouple sensors.

Novotechnik U.S., Inc.    Southborough, MA 01772
Dec 06, 2007 Suited for mobile and harsh environments, RSC Series features non-contact technology with rotating shaft, while Vert-x E Series has no shaft, but includes round position marker that mounts separately from detecting sensor component. Sensors offer programmable angular range to 360° and resolution to 14 bits. They range from miniature units measuring 13 mm dia for use in tight applications to rugged 48 mm rotary angle models sealed up to IP69K for adverse conditions.

Moore Industries International, Inc.    North Hills, CA 91343
Dec 06, 2007 Requiring 10.5 mA to operate, programmable Model TFZ allows up to 32 field devices (126 with repeaters) to be networked onto one FOUNDATION Fieldbus H1 segment. It has 20-bit input resolution, RFI/EMI protection, ambient temperature compensation, and operates in -40 to +85°C temperatures. Rated NEMA 4X/IP66, TFZ can be set from control room over segment wiring to handle 14 RTD types, 9 thermocouple types, as well as direct mV and resistance/potentiometer inputs.

Crystal Engineering    San Luis Obispo, CA 93403
Dec 05, 2007 Intrinsically safe and ATEX certified, wet/wet Model XP2i-DP features burst disc that protects sensor from over-pressure on low side connection. Digital gauge provides datalogging capabilities and can be programmed for custom engineering units. Available in panel mounting and portable configurations, unit is tested and calibrated inside environmental test chambers using computer-controlled pressure controllers.

Dwyer Instruments, Inc.    Michigan City, IN 46361 0373
Dec 05, 2007 Usable as dust collector emissions monitor and leak detector, standard Series PMT is designed for general maintenance planning and process protection applications. Adjustable linear or logarithmic output scaling enables trending of baseline and high peak emissions that are caused by filter cleaning cycles and developing leaks. Protective layers on probe work with induction-sensing to ensure reliable operation with all types of particulate.

Kistler Instrument Corp.    Amherst, NY 14228 2119
Dec 05, 2007 Designed for measuring forces and moments on tires for trucks and other heavy goods vehicles, RoaDyn® S6HT TT (Tire Testing) is rotating 6-component measuring system for wheel and tire test that can be used like measuring hub. It offers measuring range of up to 220 and 100 kN in radial and axial direction, respectively. Modified outer part with different bolt patterns and adapter flange allows standard wheels to be mounted.

Honeywell    Golden Valley, MN 55422 3935
Dec 04, 2007 OneWireless(TM) Equipment Health Monitoring (EHM) transmits complete spectral information, including vibration amplitude and operating parameter data, from field to plant control room. This 8-channel (4x vibration, 4x 4-20 mA) device communicates over OneWireless industrial mesh network, collecting acceleration, velocity, temperature, and bearing condition data for delivery to process operators and maintenance personnel to alert them of equipment problems.

austriamicrosystems AG    Premstatten   Austria
Dec 03, 2007 Combining Hall elements and signal processor on one silicon chip, Model AS5305 provides linear position measurement via single- or double-track multi-pole magnetic strip sliding over IC. Unit supports magnetic strips with pole-pair dimensions between 2.26 and 5.91 mm. In conjunction with multi-pole magnetic ring, IC can also be used as off-axis device for rotational measurements. Housed in lead-free TSSOP20 package, device operates at 5 V over -40 to +125°C ambient temperature.

Contrinex, Inc.    Lombard, IL 60148
Dec 03, 2007 Supplied in 16 mm long, AISI 303 stainless steel housing, 620 series sensor features built-in amplifier and operating distance of 2 mm. Sensing range is completely stable from -25 to +70°C, and max switching speed is 3 kHz. Suited for embedding into machines and assembly fixtures, sensor is protected to IP67 and can be flush mounted. Unit is fitted with LED operation indicator and includes short circuit, inverse polarity, and surge protection.

LEM Holding SA    Plan-les-Ouates CH-1228  Switzerland
Dec 03, 2007 Measuring 174 x 86 x 54.1 mm, DH Series split-core transducers combine Hall-effect technology and signal conditioning in one housing with rectangular sensing aperture for non-contact measurement (supporting up to 104 x 40 mm busbars or 40 mm cables). Products offer choice of primary current measurement from 500-2,000 A and provide absolute accuracy of better than 1% of nominal current value. Bipolar measurement value is delivered via 4-20 mA output.

RAE Systems    San Jose, CA 95134
Nov 30, 2007 Offering measurement range of 0-5,000 ppm and response time under 3 sec, MiniRAE Lite is intended for outdoor environmental and construction site use where hydrocarbon-based VOCs and chemicals pose toxic threat. Waterproof, nonintrinsically safe unit has 3-button interface that can be operated by users wearing up to 3 layers of gloves. Humidity compensation accommodates rapidly changing environments, and backlit graphical display ensures viewable readings in any light condition.

Automation Products Group, Inc.    Logan, UT 84321
Nov 30, 2007 Equipped with vented, watertight cable, PT-500 Series delivers 4-20 mA solid-state signal while submerged up to 450 ft. Removable stainless steel cage connects to sensor with snap ring and enables use in harsh environments. IP68-protected transmitters are temperature compensated and tested to deliver accuracy of 0.50% of span. Installed with surface mount technology, sensors are suited for sewage lift stations, tank liquid level measurement, water and wastewater.

MTS Systems Corp. - Sensor Div.    Cary, NC 27513
Nov 29, 2007 Communicating via Modbus interface, Side Tank Indicator works with Level Plus® MG transmitter to display product only, product and temperature, or product, interface, and temperature. Outputs from transmitter are communicated via 4-wire multi-drop power and data bus. Display can show measurement in feet, inches to 1/16 in., and temperature to 1 decimal point. Available with explosion-proof housing, display includes 2 relays, 4-20 mA output, 120/240 Vac input power, and 24 Vdc to gauge.