Moxa Inc.    Brea, CA 92823
Jul 30, 2009 Featuring 4 AIs, 8 DIOs, and 2 relay outputs, ioLogik W5340 Active GPRS I/O is suited for hard-to-wire locations for remote monitoring and alarm applications. Remote unit will automatically establish communications with Active OPC Server using fixed IP and can be integrated with SCADA systems. It also includes power saving and data logging features as well as active alarm message with real-time stamp including SMS, SNMP Trap, TCP, and email.

AMETEK Solidstate Controls    Columbus, OH 43085
Jul 29, 2009 Utilizing 3 technologies, Model 4500 Mk III performs reliable stack opacity measurement and dust concentration monitoring. Homogeneous LED light source, combined with Flood LED, helps achieve optimal stability and accuracy, while this solid-state system also lends to reliable operation. Featuring fully automatic zero checking and drift compensation, system is able to report data as opacity, dust density, or optical density.

Para Systems, Inc.    Carrollton, TX 75007
Jul 29, 2009 Used with security systems, telephone/VoIP systems, servers, and network peripherals, 2-outlet RPM 1521 allows users to send command via web browser to cycle power off and on. Each receptacle can be independently monitored and managed, including scheduled shut-downs and reboots. Auto-ping feature monitors and auto-detects availability of attached equipment. If no response is detected, device can send SMS text message, broadcast email, and/or send SNMP trap notification to user.

RLE Technologies    Fort Collins, CO 80524
Jul 29, 2009 Equipped with 418 and 900 MHz radio receivers, FDS-Wi receives signals from transmitters sensing temperature, humidity, motion, power, dry contact, analog (4-20 mA), 0-5 Vdc, and 0-10 Vdc signals, and integrates them to facilities monitoring systems in form of SNMP, Modbus TCP/IP, Modbus RTU, and BACnet/IP. Device can receive signals within 30.48 m of open air space with 418 MHz frequency and up to 402.34 m of open air space with 900 MHz frequency.

ACE Controls, Inc.    Farmington, MI 48335
Jul 29, 2009 Connected to devices such as linear modules, rotary actuators, and grippers, V-Sensors detect damaging unit vibration levels in automation process. They can also signal when industrial shock absorber is nearing end of its life-cycle, helping prevent repair, maintenance, and downtime. Available in PNP, NPN, and analog versions with various installation adapters, sensors are also offered with securing clamps available in various diameters.

Dytran Instruments, Inc.    Chatsworth, CA 91311
Jul 29, 2009 Along with 2-wire internal IEPE electronics, Model 3023A9 contains 3 miniature quartz laminar shear mode accelerometer elements mounted orthogonally to each other to single support and welded into titanium housing. Device mounts using 10-32 tapped hole in base, has sensitivity of 1 mV/g, single connector, is hermetically sealed, and weighs only 4 g. Labels of X, Y, and Z axes are laser marked in large font size on 3 orthogonal faces.

ASM Sensors, Inc.    Elmhurst, IL 60126
Jul 29, 2009 Available in 0.32 in. high and 1.10 in. wide industrial grade housing, maintenance-free non-contact linear position sensor PCFP25 series utilizes magnetostrictive sensing technology. Absolute position sensor is available with measurement range up to 18 ft, and provides analog outputs of 0-10 Vdc and 4-20 mA. Shock and vibration resistant sensor achieves IP64 protection rating, while 2 different styles of mounting hardware facilitate installation. CAN-Bus versions are also available.

Roche Diagnostics    Indianapolis, IN 46256
Jul 29, 2009 Suited for point-of-care testing environments, Roche Cardiac 200 lateral flow immunoassay testing system provides quantitative cardiac marker test results on whole blood samples with turnaround time of 10-19 min, to help meet best practice guidelines for emergency department settings. Featuring touchscreen and modular configurations, system processes up to 36 tests/hr and offers full cardiac marker menu that includes NT-proBNP, Troponin I (TnI), CKMB, and Myoglobin.

Synaptics    Santa Clara, CA 95054
Jul 29, 2009 Able to distinguish up to 10 simultaneous finger touches and complex multi-finger gestures (such as pinch and rotate), ClearPad(TM) 3000 Series promotes integration of Hi-Res capacitive touchscreens into OEM/ODM mobile handsets and other handheld devices. It is based on Synaptics technology, which features 48 sensing channels, and engineered to be nearly borderless. At 0.300 mm thick, sensor offers ±1 mm accuracy and full multi-finger tracking. Sizes are available up to 8 in. diagonally.

Synaptics    Santa Clara, CA 95054
Jul 29, 2009 With ClearPad(TM) 1000 Series, OEMs and ODMs of mass-market mobile handsets and other handheld devices can integrate capacitive touchscreens with basic gesture capability into products. Solid state and resistant to wear, sensors can support single-finger gestures with Enhanced Gesture Recognition option. Units are engineered to require no side borders, and feature accuracy of ±1 mm in center and 2 mm on edge. Measuring 0.300 mm thick, sensors are available in sizes up to 4.3 in. diagonally.

Spectrum Sensors & Controls    St. Marys, PA 15857
Jul 28, 2009 These 12-bit sensors convert energy from magnetic field into electrical signal, enabling contact-less operation and yielding unlimited life cycles. Qualified to RTCA/DO-160F aircraft standards, products come in ½ in., 7/8 in., and 7/8 in. dual (double redundant) sizes. Degree of linearity is achieved via precision machining, chip-tuning capability, and electronic testing processes. Construction withstands harsh environments involving temperature, vibration, moisture, and dirt.

Renishaw, Inc.    Hoffman Estates, IL 60192
Jul 28, 2009 FASTRACK(TM) combines ±5 µm/m accuracy with ruggedness of stainless steel and ease of installation of carrier-type encoder systems. Track-mounted system consists of 2 miniature guide rails that retain low-profile scales (8 x 0.2 mm cross-section) and let them freely expand at their own thermal expansion coefficient with near zero hysteresis. Encoders feature optoelectronics conferring resolutions to 1 nm as well as minimal sub-divisional error and jitter.

Schmitt Industries, Inc.    Portland, OR 97210 1818
Jul 28, 2009 Comprised of tank sensor, satellite transmitter, and network control center, Xact(TM) Tank Monitoring System utilizes ultrasonic technology to accurately measure industrial propane tank fill levels. System transmits data via Globalstar(TM) satellite network and Internet, and displays tank information on desktop PC, cell phone, or PDA. Operational in virtually any environment from -30 to +60°C, system offers temperature adjusted readings, built-in alarm levels, and automatic low tank level messaging.

Micronor    Newbury Park, CA 91320
Jul 27, 2009 Featuring passive optical design and non-metallic construction, Model MR318 provides feedback in motion control systems operating in extreme electromagnetic fields. Multi-turn encoder system offers 360 ppr resolution and measures both angular position and shaft speed. Through multimode fiber optic link, encoder connects to MR310 Remote Encoder Interface module, which operates from 15-32 Vdc and offers A/B quadrature outputs, programmable analog outputs, and RS422/RS485 serial interface.

OmniVision Technologies, Inc.    Sunnyvale, CA 94089
Jul 27, 2009 Based on OmniPixel3-HS(TM) architecture, 1/7.5 in. Model OV7739 supports parallel and MIPI interfaces, and delivers low light performance at 3,300 mV/(lux-sec), enabling video conferencing and recording in virtually any lighting condition. Device operates at 30 fps in VGA resolution and 60 fps in QVGA resolution with user control over image quality, formatting, and output data transfer. It provides full-frame, sub-sampled, windowed, or scaled 8-bit/10-bit images in RAW RGB and YUV formats.

Kavlico    Moorpark, CA 93021
Jul 27, 2009 Incorporating piezo-resistive sense element, Model PT250 features integral pipe pressure connection that is welded at pressure source. All-welded, 304L stainless steel unit does not utilize gasket, thereby complying with EU 842/2006 directive. Operating on supply voltage of 9-32 Vdc, transmitter features pressure ranges from 0-100 through 0-5,000 psi, and provides 4-20 mA linear analog output that is proportional to pressure. Unit is RFI/EMI and reverse polarity protected.

Kavlico    Moorpark, CA 93021
Jul 27, 2009 Packaged with ASIC, model P500 ceramic capacitive pressure sensor can be used for measuring various process media. Standard pressure ranges are available from 0-15 through 0-750 psi and 0-1 through 0-40 bar, absolute or sealed gage. Measuring under 1.6 in. long, sensor can be packaged in brass, stainless steel, or carbon-plated steel. Design offers shock/vibration tolerance, over-pressure and ESD protection, as well as temperature-compensated linear amplified output of 0.5-4.5 Vdc.

AMETEK Solartron Metrology    Gastonia, NC 19301
Jul 27, 2009 Featuring stainless steel bodies and Mineral Insulated Cable options for chemical resistance, SR Series Absolute Linear Position Sensors are suited for laboratory, process control, and transportation applications. Units are available in sealed versions capable of withstanding pressures of 100 Bar or IP68-rated with MS type connectors. DC/DC and 4-20 mA versions feature on board signal conditioning along with screening against electrical interference.

WIKA Instrument Corporation    Lawrenceville, GA 30043
Jul 24, 2009 Constructed with 316 stainless steel body, Mini-Siphon Type 910.24 is designed to replace old pigtail and coil siphon. Thermal barrier protects pressure gauge from harmful steam, hot vapors, and liquids, while 316 stainless steel inner chamber reduces pressure surges and water hammer. Mounted vertically or horizontally, product has ½ in. NPT male to ½ in. NPT female connection. Max media pressure and temperature ratings are 6,164 psi and 840°F, respectively.

Sensor Developments, Inc.    Orion, MI 48359
Jul 24, 2009 Available in single, dual, and custom flange designs, with capacities ranging from 1,000-250,000 in.-lb, model 01251 (IRT) allows for sensor output to be configured as frequency, analog, or 4-20 MA current loop. Signal filter response and output level signals are also adjustable via computer control, while GUI program is provided for setting sensor parameters. Supplied in multiple attachment configurations, sensor includes ISO-17025 accredited calibration certificate.