Honeywell Sensing and Control    Golden Valley, MN 55422
Mar 13, 2009 Providing 3 V supply voltage capability, Model SS361RT comes in miniature SOT-23 surface mount package utilizing tape and reel format, while Model SS461R features flat TO-92 style package. Bipolar latch, Hall-Effect sensors are suited for variety of applications, including speed sensing, flow rate sensing, brushless DC motors, medication dispense control, electric window lifts, and convertible roof positioning.

Baumer Ltd.    Southington, CT 06489 1534
Mar 13, 2009 Available in NPN and PNP outputs, Magnetic Cylinder Sensors provide discrete output regarding end-of-stroke position of pistons in pneumatic cylinders. Five different C- and T-slot models are available for use in round cylinders and cylinders with tie-rods. IP67-rated housing withstands harsh and wet end-use environments. Featuring cable or fly-lead connectors and 3-30 Vdc supply range, non-contact sensors are suited for robotic and automated equipment in range of industries.

K-Tek    Prairieville, LA 70769
Mar 13, 2009 Snap action pneumatic switch, BETA Air Relay, features deadband of as low as 10 mbar and supports pilot supply and signal pressures up to 7.0 bar. It is available in as TYPE SA for Normally Closed operation and TYPE SB for Normally Open operation. Designed for valve control, bleed-off shut-down, or alarm applications, both offshore and on, product can also be safely used in hazardous areas, including Zone 0 (no spark) applications.

Phymetrix Inc    Medford, NY 11763
Mar 13, 2009 Featuring rugged and weatherproof construction, PPMa and PPBa nanopore, metal oxide ceramic sensor based moisture analyzers are provided with NIST traceable calibrations and feature backlit graphic LCD display, snap dome tactile membrane switches with dynamically assigned legends, and USB port. Measurements are temperature and pressure compensated with built-in sensors, and are simultaneously displayed with uncorrected readings. Hook and magnet are supplied for temporary field attaching.

Paradigm Electronics    Mississauga   Canada
Mar 13, 2009 Equipped with high excursion bass drivers, Reference SUB 12 and SUB 15 feature low frequency extension of 12 Hz and 16 Hz, respectively. Drivers include mineral-filled co-polymer polypropylene cones with RCR(TM) Resonance Control Ribs, dual voice-coils, multi-layer polyurethane-composite elliptical-shaped surrounds, AVS(TM) Airflow Ventilation System, and 35 lb FEA-optimized magnet assemblies. Dual Ultra-Class-D(TM) amplifiers deliver 3,400 W dynamic peak power and 1,700 W RMS sustained power.

Dwyer Instruments, Inc.    Michigan City, IN 46361
Mar 12, 2009 Employing sensing techniques that use Microwave and Doppler, Series BFM can monitor flow/no flow conditions in pipes and chutes. CPU monitors movement of solids and liquids, and sensitivity is adjustable to meet demands. Able to sense presence or absence of materials in Pneumatic Air System, product requires no maintenance and incorporates LED status indicators for flow. Mounted to outside of pipe/chute via tabs, BFS-1 Sensor comes pre-wired with 3 ft, 18 ga, 2 conductor wire.

Dytran Instruments, Inc.    Chatsworth, CA 91311
Mar 12, 2009 Offering sensitivity of 100 mV/g and broad frequency response, model 3263M9 features lightweight titanium housing, single 4-pin connector, and 4-40 tapped hole, as well as IEEE 1451.4 TEDS. Labels of X, Y, and Z axes are laser marked in large font size on 3 orthogonal faces, for aiding user in orienting sensor. Product is also suited for use in noise, vibration and harshness (NVH) testing, environmental stress screening (ESS), and general purpose triaxial vibration measurements.

Teledyne Hastings Instruments    Hampton, VA 23661
Mar 12, 2009 Designed for use with DV-6 and DV-4 series thermocouple gauge tubes, Digital CVT (DCVT) digital vacuum gauge tube controller features dual setpoint control relays, analog output, and RS232 communication. It also features display that can be configured for torr, mbar, or pascal operation.

HBM, Inc.    Marlborough, MA 01752 3014
Mar 11, 2009 At 1.2 x 2 mm, Y series micro-strain gauges detect mechanical stresses that occur during production of complex PCBs. They attach directly to board to monitor levels, which are 850 µm/m for unpopulated PCBs and around 450 µm/m for populated boards. Measurements can be obtained during production processes including depanelization, plug assembly, in-circuit testing, and installation as well as in solder bath. Units are available in linear and rosette form.

Extech Instruments Corp.    Nashua, NH 03063
Mar 11, 2009 Utilizing flat surface electrode, ExStik® CL200 monitors Residual Chloramines and Total Chlorine including free chlorine, hypochlorite, and chlorine bound to nitrogenous compounds. Unit provides direct reading of Total Chlorine from 0.01-10.00 ppm, eliminating need to transport sample back to lab for analysis. Meter is suited for measuring chlorine in drinking water, cooling towers, wastewater treatment systems, industrial cooling water, pools, spas, and food processing.

Clark Solutions    Hudson, MA 01749
Mar 11, 2009 Utilizing IR technology to monitor and control fluids, including corrosive or aggressive liquids, PFA Teflon® Turbine Flow Sensors are designed for full-scale flow ranges of 2.0, 20, and 40 Lpm with accuracy of 1% of reading and repeatability of better than 0.15%. Featuring lightweight rotor that generates IR reflected digital output signal, sensors can be supplied with internal preset flow switch set via software interface, and internal programmable batch function for dispensing and dosing.

Axiom Analytical, Inc.    Irvine, CA 92714
Mar 10, 2009 Allowing process monitoring in full-scale batch reaction vessels, FDR-1800 Series Near-IR Diffuse Reflectance Probes utilize window sealing technique involving sapphire to metal welded pressure seal. Chemical resistance is ensured because only materials in contact with process are sapphire, high nickel alloys, and thin flash of either gold or PTFE. Device provides NIR diffuse reflectance data for nearly opaque samples and fluids with total reflectance of below 2%.

CleanAIR Systems, Inc.    Santa Fe, NM 87502
Mar 09, 2009 E-POD(TM) combines non-toxic, zeolite-based selective catalytic reduction (SCR) catalyst, diesel particulate filters or diesel oxidation converters, and reductant mixing system within one, fully insulated, stainless steel, critical-grade silencer package. Installed above generator and becoming part of trailer's roof, system with DPFs enables Tier 4 final compliance for diesel stationary engines and NSPS compliance for lean-burn natural gas engines by reducing NOx, PM, HC, and CO.

MAZeT GmbH    07745 Jena   Germany
Mar 09, 2009 Featuring integrated signal processing and 4 programmable amplifier channels, low-profile True Color Sensor TIAM3 is suited for implementing RGB-LED backlighting control in flat screens. Spectral characteristics of filter curves are optimally tuned for eye-accurate LED color control requirements. Applications include displays for photograph and image editing, visual medical diagnostics, or high-end multimedia.

Solar Metrology    Holbrook, NY 11714
Mar 06, 2009 Featuring 600 x 1,200 mm lateral X/Y range of measurement, SMX-FPV is designed for near-line film composition and thickness control of CIGS and CdTe film stacks. It also provides process control of active, contact, and TCO layers. Detailed analysis of full photovoltaic panels is possible, including copper and gallium ratio determination as well as panel gradient analysis. Areas of use include research and process development, in-process monitoring, and post-process QC.

Lowrance    Tulsa, OK 74128
Mar 06, 2009 HDS (High Definition System) multifunction displays are available with side-viewing sonar technology option that offers photo-like presentation for underwater bottom and structure viewing. In addition to providing legacy total-sonar performance, add-on module works in tandem with existing HD 2D sonar displays. It is networked using Ethernet connections, allowing sonar to supplement all HDS displays mounted on boat. Uses include underwater search/recovery and marine ecology sciences.

Balmac Inc.    Plain City, OH 43064
Mar 05, 2009 Providing 4-20 mA output signal that is proportional to vibration amplitude, heavy-duty vibration transmitter Model 191 is 2-wire, loop powered sensor used to monitor oil and gas production pumps, compressors, fans, and motors. Powered by 12-24 Vdc source, output wire can be connected to any existing PLC, SCADA, or DCS system. Product is enclosed in rugged, NEMA 4 weatherproof case and is listed by UL-Underwriters Laboratories for use in hazardous locations (Listing ZTSZ).

Koehler Instrument Co., Inc.    Bohemia, NY 11716
Mar 05, 2009 Heated Oil Test Centrifuge incorporates LCD touchscreen control panel that can be used to govern centrifuge rotation speed, turn heat on/off, set duration of test, and choose type of rotor assembly and corresponding glassware to be used during test. Manufactured to meet Class 1, Division 2 explosion resistant rating, system conforms to range of Standard Test Methods and features top-opening lid that provides access to rotor and tube holders and features 18½ in. dia viewing window.

Baumer Ltd.    Southington, CT 06489 1534
Mar 04, 2009 Reliant upon LED or laser light sources, Series 14 sensors detect presence, placement/orientation, or size of objects. They are available with 3 methods of operation - thru-beam, retro-reflective, diffuse - and have integrated channel that lets cable lay flush against sensor housing for limited-space installations. Along with transparent rear housing for viewing operation/reception LEDs, available features include molded M12 (S14) connector and metal 4-pin M8 connector (S35A).

Dynapar    Gurnee, IL 60031
Mar 03, 2009 Using magnetic coupling technology, NorthStar HDN and HDP Series eliminate encoder shafts, bearings, and seals. Target magnet, in form of bolt or collar, can be affixed to rotating shaft or equipment that requires position or speed sensing. Electronics are completely sealed and encapsulated in clear potting compound, which allows visibility of status LEDs that monitor signal output. Available in incremental or absolute output format, encoders are suited for very dirty environments.