Pickering Interfaces Inc    GRANTS PASS, OR 97526
Nov 18, 2009 Model 41-752 is 6-cell battery simulator that provides up to 300 mA of current from each cell, with output voltage from each adjustable up to 7 V. Each cell includes sense lines to optimize regulation performance and can be configured to operate as current sink in battery charging circuit of up to 100 mA. Independently controlled channels allow cells to be set to different output voltages to simulate different charge and capacity states.

Pepperl + Fuchs, Inc.    Twinsburg, OH 44087 2245
Nov 18, 2009 With Series F99 Sensors, users can configure and monitor incline or tilt angle of machine elements or equipment platforms in single or dual axis applications, from 0-360° with accuracy of ±0.5°, via CANopen interface. Units feature metal mounting brackets, outdoor IP68/69k rating, and either 4-20 mA or 0-5 Vdc analog outputs. Operating from -40 to 85°C, sensors have power supply range from 10-30 Vdc and 2 adjustable switching outputs.

BI Technologies Corp.    Fullerton, CA 92835-1051
Nov 18, 2009 As non-contact, single-turn, Hall Effect position sensor, MagnePot Model 6120 features low mechanical torque with programmable electrical angle from 5°-360°. Three standard configurations are available with 1/8 or ¼ in. shafts and ¼ or 3/8 in. bushings; custom models are also offered. Ranging from linear to non-linear, multiple factory-programmable output profiles are also available. Standard independent linearity is ±0.5%, and operating range is -40 to +125°C.

austriamicrosystems AG    Premstatten   Austria
Nov 18, 2009 Model AS1716 sensor interface incorporates all analog functions on-chip to provide interface for piezoelectric capacitive sensors. Operating from 4.5-5.5 V supply, unit includes differential inputs; first order low-pass filter; differential-to-single-ended conversion; programmable gain stage; and 2-pole, low-pass multiple feedback filter. It interfaces with sample/hold input stages and analog digital converters and is available in 8-pin SOIC package.

Coherent Inc., Laser Group    Santa Clara, CA 95054-1112
Nov 18, 2009 PowerMax(TM) USB/RS sensors include signal processing and power measurement electronics inside USB 2.0 or RS-232 cable connector. Units connect directly to PC and include PowerMax PC applications software with virtual instrument interface, which enables operator to take laser power readings, log data, and compute measurement statistics. Suited for various applications, sensors provide accurate laser power measurement from deep UV to IR over µW to kW power range.

STMicroelectronics    Lexington, MA 02421
Nov 17, 2009 Supplied in 4.4 x 7.5 x 1.1 mm package, analog LYPR540AH accurately measures angular rates along 3 orthogonal axes. Resulting 360° angular-rate detection enables 3D gesture and motion recognition, promoting adoption of realistic motion user interfaces in consumer applications. Operating with any supply voltage from 2.7-3.6 V and stable over -40 to +85°C range, product provides 2 separate outputs, 400 and 1,600 dps, for each of 3 axes simultaneously.

Pepperl + Fuchs, Inc.    Twinsburg, OH 44087 2245
Nov 16, 2009 Intended for plastic fiber optic cables, SU18 and SU19 Photoelectric Fiber Optic Sensors feature multiple detection modes, selectable timing functions, remote teach capability, and 4-in-1(TM) output. Latter automatically selects NPN light/dark on and PNP light/dark on output options from single sensor. While SU18 series is available in pushbutton or potentiometer adjustable versions, SU19 series offers 4-digit, percentage-of-light-received LED display and glass detection mode.

HBM, Inc.    Marlborough, MA 01752 3014
Nov 16, 2009 Multi-purpose torque flange, T40, is available with rated torques of 200 and 500 Nom as well as 1, 2, 3, 5, and 10 kNom. Identical electrical configuration throughout series allows use in various applications without modification. Able to handle numerous torque measurement applications on test benches and in process monitoring, product is insensitive to parasitic loads and ensures secure, error-free measured value acquisition/transmission even under difficult ambient conditions.

Automation Products Group, Inc.    Logan, UT 84321
Nov 16, 2009 Leveraging MEMS-based sensing technology, IP67 rated Model PG7 features full 5-digit display with 0.4 in. characters. Unit is available with ranges from vacuum to 500 psi and from 0-10,000 psi, with ±0.25% full scale accuracy and .01 digit resolution through 100 psi. Equipped with all stainless steel sensor that is resistant to vibration and shock, gauge includes microprocessor-based circuit with Tare, Peak Hold, and Max-Min capability. Lockout feature prevents unauthorized access.

Dexela Limited    London N1 7EU  United Kingdom
Nov 16, 2009 Dexela flat panel CMOS X-ray detectors are based on CMOS sensor that features high fill factor, efficiency, and low noise which combine to produce DQE of 0.70 at skin dose of 280 µGy. Sensor consists of photodiode array with pixel size of 75 µm, while detectors are available in models with up to 86 fps frame rate and active area up to 290 x 230 mm. They feature shock-/vibration-resistant aluminum housing and operate in temperatures from 10-40°C. High-speed Camera Link interface is included.

Cognex Corp.    Natick, MA 01760 2059
Nov 16, 2009 Able to be configured as presence or measurement sensor, Checker® 3G7 offers 752 x 480 pixel resolution for inspection of small features and white LED illumination for optimum image contrast. It can detect and inspect up to 800 parts/min and does not require PC for setup. With same resolution and lighting features as 3G7, Checker 272 offers ladder logic editor, encoder-based part tracking, and additional I/O. It also includes both presence and measurement sensors.

OSRAM Opto Semiconductors GmbH    Regensburg D-93049  Germany
Nov 13, 2009 Similar to human eye, SFH 5712 detects ambient brightness and offers standard as well as high speed (3.4 MHz) rates. There is no need for additional control commands; IC in sensor automatically provides measured value between 3 and 65,000 lx twice per second. Measuring 2 x 2 x 0.7 mm, sensor has 4 connections and can be controlled via its I²C interface. Applications include adjusting the brightness of displays on mobile terminals to suit ambient light conditions and conserve energy.

RAE Systems    San Jose, CA 95134
Nov 13, 2009 Designed for first responders, handheld ToxiRAE 3 can be clipped to paramedic's First-In bag to provide situational awareness about presence of carbon monoxide. Instrument includes display for both toxic concentration and days remaining for battery. Operating from -4 to +140°F, monitor is compatible with AutoRAE Lite automated bump-test and calibration station.

MEDER electronic, Inc.    West Wareham, MA 02576
Nov 13, 2009 Capable of switching up to 3 W with individual maximum ratings of 0.5 A and 5 V, MK24 series surface mount reed sensors have minimum breakdown voltage of 100 Vdc across contacts and meet minimum life expectancy of 50 million operations at 5 V, 5 mA, 100 Hz. Available in 3 lead designs they come in tape and reel packaging and are suited for pick and place automation. RoHS compliant sensors require no external power to operate, and are available with sensitivity ranges from 1.5-10 mT.

Agilent Technologies, Inc.    Santa Clara, CA 95051
Nov 13, 2009 Based on Agilent 5975C gas chromatograph/mass spectrometer, Semi-Volatile Organic Compound Analyzer provides pre-configured tool for detecting and measuring SVoC in water and soil samples. Capillary Flow Technology, configured for backflushing of heavy matrix, optimizes analysis time and minimizes maintenance needs. Analyzer package also includes Deconvolution Reporting Software and Semi-volatiles DRS database/library with 338 single component analytes from EPA methods 525 and 8270.

Cypress Semiconductor Corp.    San Jose, CA 95134
Nov 13, 2009 Replacing mechanical buttons and sliders, 1.8 V CapSense® CY8C20xx6A Series has up to 36 general-purpose I/Os to implement multiple CapSense interfaces. PSoC® programmable system-on-chip architecture enables single CapSense device to also manage functions such as motor control, intelligent sensing, and LED control. With waterproofing and immunity to conducted and radiated noise, devices enable touch-sensing in white goods, home appliances, printers, computers, and TVs/monitors.

Honeywell Sensing and Control    Golden Valley, MN 55422
Nov 12, 2009 Operated by north or south pole of magnetic field from permanent magnet or electromagnet, SS351AT/SS451A sensors eliminate need for magnet polarity to be identified. They operate from 3-24 Vdc and up to 302°F and offer built-in reverse polarity protection. While SS351AT is subminiature SOT-23 SMT device available on tape and reel, SS451A is supplied in leaded, flat TO-92 package. Thermally balanced IC provides stable operation over temperature range.

Impress Sensors & Systems Ltd    Berkshire RG7 8PN  United Kingdom
Nov 12, 2009 Designed for submersible applications, SDI-12L (serial data interface at 1,200 baud) hydrostatic level transmitter has operating temperature range of -20 to +60°C, and can be used in depths of up to 200 m. Accuracy of inbuilt temperature sensor is less than ±0.1% of full-scale output. Models use either stainless steel silicon-based pressure sensor or ceramic pressure sensor in marine-bronze, and piezoresistive technology. Ceramic pressure versions suit seawater, estuary, and saline applications.

Cypress Semiconductor Corp.    San Jose, CA 95134
Nov 12, 2009 Targeted for machine vision market, 1.3 megapixel VITA 1300 features pipelined and triggered global shapshot shutter capability, which enables exposure during read-out to minimize motion blur. Sensor also works in rolling shutter mode with correlated double sampling to minimize noise and maximize dynamic range. Offering ½ in. optical format with monochrome or color digital output, sensor has four 10-bit digital LVDS outputs that enable transfer of image data over standard industry protocol.

Renishaw, Inc.    Hoffman Estates, IL 60192
Nov 11, 2009 TONiC(TM) incremental encoders feature standard readhead and Ti20KD (1 nm) or Ti10KD (2 nm) interfaces that apply high interpolation rates to achieve very fine resolution. Interfaces combine low-noise optical scheme with optimized photometry and filtering to reduce jitter to 0.51 nm rms. Compliant with various environmental standards, encoders are available in linear and rotary versions with range of high-accuracy scale options.