Dwyer Instruments, Inc.    Michigan City, IN 46361
Dec 03, 2010 Designed to install in virtually any pipe without obstruction of pipe diameter, Series TDMT is completely encapsulated in epoxy resin and is vibration and shock resistant. Unit is available in 1 in. size with 1 in. NPT union nut or 1¼ in. size with 1¼ in. union nut. Extensions are available for pipe sizes up to 10 in. diameter. Operating according to calorimetric principle, stainless steel analog flow meter provides minimum flow range of 0-0.66 ft/sec and max flow range of 0-13.12 ft/sec.

Piher International Corp.    Libertyville, IL 60048
Dec 02, 2010 Housed in 6 x 17 x 18 mm package, Model MTS360 utilizes Hall Effect technology to enable true non-contacting through-hole shaft sensing. Device offers electrical angles up to 360° with no dead band and linearity as low as ±0.5%. Rated for use at -40 to +150°C, standard model features 4 mm double D-flat shaft and (8) pad SMD footprint that is compatible with reflow soldering systems. Output is selectable between Analog, PWM 12 bits, or Serial Protocol at 14 bits.

STMicroelectronics    Lexington, MA 02421
Dec 02, 2010 Suited for smart phones, sports watches, and other portable equipment, Model LPS001WP has operating pressure of 300-1,100 millibar, corresponding to atmospheric pressures between -750 and +9,000 m relative to sea level. Device can detect pressure changes as small as 0.065 millibar, corresponding to 80 cm of altitude. VENSENS technology allows pressure sensor to be fabricated on monolithic silicon chip with burst resistance up to 20 times full scale.

Banner Engineering Corp.    Minneapolis, MN 55441
Dec 02, 2010 Using pulses of Class 1 IR laser light to locate position of objects in field of view, Model AG4 protects personnel by safeguarding stationary and mobile hazards within user-designated area. Featuring configurable response time from 80-640 msec and 0.36° lateral resolution, unit detects objects in zone up to 190° from its fixed position. Scanner provides selectable protection field resolution of 30, 40, 50, 70, and 150 mm with ranges up to 6.25 m, and warning field provides coverage up to 15 m.

Cherry Electrical Products    Pleasant Prairie, WI 53158
Dec 02, 2010 Tested to SAE J1455, GS102301 is self-adjusting over range of magnetic flux densities. This eliminates need to optimize sensor position within small magnetic flux operating range and also compensates for target run out. Digital output Hall effect speed sensor also features single hall plate design immune to alignment issues. Operating from -40 to +140°C, sensor meets IEC60529 IP68 standards for water immersion and incorporates EMI and ESD protection circuitry.

Heidenhain Corp.    Schaumburg, IL 60173-5337
Dec 02, 2010 Available in various hollow shaft diameters, Series RCN 2000/5000/8000 provide position and speed control through use on rotational axes. Encoders use single-field scanning principle with optical filtering to produce optimal scanning signals. In addition to evaluation electronics with diagnostic functions, units include plug-in cables with quick disconnect at encoder. Axial and radial deflection behavior, along with torsional rigidity of stator couplings, maximize mounting tolerances.

PREMO Group    Barcelona   Spain
Dec 01, 2010 Featuring range starting as low as 4 mA, accuracy of 0.2%, and linearity of 0.1%, HCT-2000LF closed-loop Hall Effect current transducer is tolerant to noise and disturbance and designed for full mechanical and functional compatibility with industry standards. Input supply symmetrical voltage accommodates power supplies from 15-24 V, while electronics and hall effect sensing components are optimized for high availability operation. Current offset can be trimmed and compensated by software.

MAZeT Mikroelektronik Anwendungszentrum GmbH      Germany
Dec 01, 2010 In addition to spectral operating detector, Model TIAM4 contains entire sensor electronics on-chip. Photocurrents of detector are converted into voltages and are available via S and H on MUX on output side as analog voltage signal for digital conversion. TIA-based amplifier is individually programmable in transimpedance over 8 levels and is characterized by optimal linearity. Combined with light source, sensor is suitable for fast and/or portable color measuring.

Fujifilm Medical Systems USA Inc    Stamford, CT 06902
Dec 01, 2010 Measuring 14 x 17 in., FDR D-EVO(TM) Wireless converts any analog room to digital with direct fit into existing table or upright system. Irradiation Side Sampling technology optimizes detective quantum efficiency, enabling technologists to take quality images at minimized doses. With wireless detector, scatter and blur of x-rays are minimized, resulting in sharp, detailed images for optimal diagnostics. Removable lithium ion battery provides up to 3 hr of operation or 400 exposures per charge.

Melexis Inc.    Concord, NH 03301
Nov 30, 2010 Featuring Triaxis(TM) Hall technology, customer-programmable Model MLX91206 monitors current flowing in external conductor such as bus bar or PCB track. Contactless monolithic unit consists of CMOS Hall IC with thin ferromagnetic layer structured on its surface, which is used as magnetic flux concentrator. Housed in SOIC8 package, RoHS-compliant sensor provides accuracy of ±2.5% over full temperature range of -40 to 125°C and is appropriate for DC and/or AC current measurements up to 90 kHz.

Continental    Allentown, PA 18106
Nov 30, 2010 Crash Impact Sound Sensor improves vehicle occupant protection by using structure-borne noise generated during frontal and side-impact collisions to determine how airbags deploy. Analyzing and evaluating collision within milliseconds, algorithms relay data about crash event to vehicle's restraints control module so airbags and pre-tensioners can be fired with proper force at timing. Side-mounted pSAT sensors detect pressure changes in door cavity using entire side door as sensing area.

HD Electric Co.    Waukegan, IL 60085
Nov 29, 2010 Featuring electronic touch pad with large buttons, PRX-500 proximity voltage detector can identify voltage from 120 V up to 500 kV. Unit offers audible and visual indication of voltage detected from elbow test points up to highest transmission voltages. Rechargeable internal battery can be charged from truck or wall outlet.

BlueLevel Technologies, Inc.    Rock Falls, IL 61071
Nov 24, 2010 Able to detect materials with densities as low as 3.12 lb/ft³, Model VHS is intended for bins with changing materials and where recalibration is to be eliminated. Rod probe design works with process temperatures up to 230°F, and optional design works with process material temperatures up to 320°F. Equipped with universal AC/DC power supply, fail-safe relay output, and ruggedized enclosure, sensor uses piezoelectric technology to create harmonic vibration in absence of material.

Saelig Co., Inc.    Pittsford, NY 14534
Nov 24, 2010 Based on MEMS sensor, 3-axis JoyWarrior24F14 measures in ranges of ±1, ±1.5, ±2, ±3, ±4, ±8, or ±16 g with 14-bit resolution, delivering 125 results/sec. Sensor enumerates and works as joystick, enabling users to access data via operating system's joystick API without installing any specific drivers. Measuring 30 x 33 x 5 mm, USB-powered JoyWarrior24F14 is suited for acceleration, tilt, and low frequency vibration sensing, as well as for human input applications.

GAO Tek Inc.    Toronto M1B2K4  Canada
Nov 24, 2010 Utilizing TDR technology to display picture on LCD screen, model 6130 tests underground cables to discover impedance break points in HFC systems and then locate and reveal cable damages, tie-in dampness, and terminal impedance failure. Specifically, unit finds cable faults such as short circuits, open circuits, and high resistance joints and also shows exact distance of fault. Portable instrument tests 25, 50, 75, and 100 Ohm impedance cables at distances from 15-2,000 m.

Astellia    New York, NY 10011
Nov 23, 2010 Astellia 3G UTRAN optimization solution consists of mobile probe and embedded software suite dedicated to monitoring of UTRAN interfaces. It enables engineers to detect quality degradations through KPIs focused on subscribers' experience; uncovers problem root causes, from high level KPIs to CDRs, multi-interface call trace, and protocol decoding; and allows site parameters to be adjusted. Auto-detection and auto-configuration capabilities speed setup in field.

LabTech Software LLC    Toledo, OH 43604
Nov 23, 2010 Designed for Managed Service Providers, LabTech 2010.2 Remote Monitoring, Management, and Automation software enables unlimited number of scripts to be run at any given time with minimum impact on server loads. Software includes caching abilities for Windows Updates, LabTech Server downloads, and external URL downloads. Agent-based solution also provides variety of IT management tools, such as remote desktop, trouble ticket tracking, user information, support, and software management.

Federal Signal Corp., Signal Div./Electrical Products    University Park, IL 60466
Nov 23, 2010 Designed for industrial public address and general alarm applications, Models P-LS2B and P-LS2C are available in ATEX/IEC Zone 1 explosion-proof version with IP66 rating. Units are manufactured from corrosion-resistant, anti-static, glass-reinforced polyester and accept audio input of 100 Vrms. Transformer coupled with max power output of 25 W, Models P-LS2B and P-LS2C are supplied with 10 preset taps to provide adjustable sound output range of 114-124 dB and 113-123 dB, respectively.

HBM, Inc.    Marlborough, MA 01752 3014
Nov 22, 2010 Model K-OTC sensor, suited for type K-OL and K-OR optical strain gauges, compensates temperature response of gauges. Based on optical strain gauge applied to aluminum sensor body, it measures thermal dilatation of aluminum and temperature-dependent signal change of fiber Bragg grating, allowing signal of gauge to be compensated by computation. Sensor signal is read into catman®AP software with signals of optical strain gauges, and compensation occurs automatically.

IMI Sensors, Div. of PCB Piezotronics    Depew, NY 14043-2495
Nov 22, 2010 Series 176 high-temperature pressure sensors mount to gas turbine combustor to provide operators with diagnostics, part fatigue analysis, and ability to continuously monitor and control emissions. Able to detect and measure pressure phenomena and combustion instability in temperatures up to 986°F, ATEX and CSA certified units also offer sensitivities to 17 pC/psi and ranges from 20-400 psi. High frequency capability enables use of auto-tuning and on-line diagnostic monitoring systems.