Emerson Process Management    Pleasanton, CA 94566
May 06, 2011 Designed to measure pressure and temperature behind casing in subsea production wells online and in real-time, Roxar Downhole Wireless PT Sensor System - Annulus B consists of Integrated Downhole Network system, Downhole Network Controller Card, wireless reader, wireless PT Transponder and antennae, and transponder and reader carrier. System is qualified to last minimum of 20 years at temperatures up to 302°F and pressures up to 10,000 psi, with accuracy of ±2.5 psi and ±0.18°F.

Paul N. Gardner Co., Inc.    Pompano Beach, FL 33060 6608
May 05, 2011 Ready to measure with no calibration adjustment required for most applications, POSITECTOR 6000 III Series includes versions for ferrous metals, non-ferrous metals, or for all metal substrates. Standard models feature monochrome display and can store 250 readings, while advanced models, with reversible color LCD, store 100,000 readings and enable data transfer via USB to PC or via Bluetooth to PC or printer. Scan mode lets users take continuous readings without lifting probe.

Raytek Corporation    Santa Cruz, CA 95061 1820
May 05, 2011 Model CS210 process imaging system enables cement manufacturers to continuously monitor rotary kilns to detect hot spots due to refractory loss, damage, and wear. Providing temperature monitoring along entire length of kiln shell, IR system also detects abnormal conditions such as faulty flame position and shape. Unit includes MP150 HR linescanner, with 1024 data points/scan line, as well as Ethernet TCP/IP communications and Windows® 7 compatible DataTemp® CS Software.

Konica Minolta Sensing Americas, Inc.    Ramsey, NJ 07446
May 04, 2011 Handheld spectrodensitometers are available in FD-5 series models that measure density and color, as well as FD-7 series units that can also monitor paper, inks, and plant lighting conditions. Models in FD-7 series offer scanning mode for creation of ICC profiles, and can measure over 400 times/sec. Able to account for fluorescence of paper substrate, both products also allow users to provide measurements that comply with Flexographic Image Reproduction Specifications and Tolerances.

Masimo, Inc.    Irvine, CA 92614
May 04, 2011 Available in handheld and bedside devices, rainbow® Reusable Direct Connect SpCO Sensors are suited for patients with low oxygen saturation of 90-95% and elevated methemoglobin between 0-2%. Units continuously measure total hemoglobin, oxygen content, carboxyhemoglobin, methemoglobin, Pleth Variability Index, and acoustic respiration rate. By allowing immediate and non-invasive assessment of toxic CO levels, sensors enable early detection of CO poisoning to facilitate life-saving treatment.

Marshall Electronics    El Segundo, CA 90245
May 03, 2011 Suited for those requiring retro sound during digital recording, UR-1 microphone combines classic, mellow sound of ribbon microphone and integrates it with USB technology. Electrical circuitry matches input requirements of ADCs and USB output with low-noise and high dynamic range. Focused in all-metal body with double-shielded grill, microphone can be used for recording singing, voiceovers, and podcasts. Volume control and headphone jack allow real-time monitoring without any latency.

CUI, Inc.    Tualatin, OR 97062
May 02, 2011 Housed in 9 mm package, 2-bit quadrature ACZ09 Series features rotational life of 30,000 cycles, operating temperature range of -10 to +65°C, and insulation resistance of 300 Vdc, 100 MW. Incremental encoders can be configured in over 1,000 different versions and are suitable for audio, aircraft, medical, and test equipment applications.

WattStopper    Santa Clara, CA 95050
May 02, 2011 Designed to detect only visible portion of lighting spectrum, single-zone closed loop Model LMLS-400 and multi-zone open loop Model LMLS-500 include 2-way IR transceiver for communication with wireless configuration tool. Model LMLS-400 additionally features automatic commissioning for either switching or dimming. Either sensor can be configured for on/off switching, bi-level or tri-level step switching or step dimming, or continuous dimming for each controlled zone.

Kistler Instrument Corp.    Amherst, NY 14228 2119
Apr 29, 2011 Type 9809A hand force measuring system is designed for short- and long-term assessments of biomechanical forces, loads, or applied stresses to objects or machines. System features 2 hand force measuring handles with charge amplifiers, as well as USB interface, datalogger with CompactFlash card, DAQ system, software, and cables. Included multi-component piezoelectric force transducer offers dynamic measurements in 3 orthogonal directions. Unit requires laptop PC with USB port for operation.

Renishaw, Inc.    Hoffman Estates, IL 60192
Apr 29, 2011 RESOLUTE(TM) is available with FANUC serial communications in linear encoder formats, offering sub-micron accuracy and resolutions to 1 nm. Suited for precision machine tool builders requiring max performance from linear axes, product promotes smooth velocity ripple and servo stiffness while reducing hysteresis errors. It determines absolute position immediately upon switch-on, and images are captured, analyzed, and interpolated to resolutions as fine as 1 nm at speeds to 100 m/sec.

Eaton Corporation    Raleigh, NC 27615
Apr 28, 2011 Engineered for OEMs, PM3 module monitors power of branch and main circuit applications. It specifically measures current and voltage, calculates power and energy usage, and provides breaker status. Designed for Series G L-Frame and Series C K-Frame molded-case circuit breakers, this UL-Listed, add-on communications device can also be installed in reverse-feed applications with reverse-fed breakers. Measurement accuracy is within 2% of reading.

Sierra Monitor Corp.    Milpitas, CA 95035 6825
Apr 28, 2011 Offered with cast aluminum or 316 stainless steel enclosure for hazardous areas, Model 5100-25-IT is network-enabled with choice of outputs, including 4-20 mA, serial RS-485 Modbus RTU interface, or optional 8 A integral relays. Unit features 8-character, fixed and scrolling LED display and extended calibration frequencies that only require calibration every 6 months. To meet unique application requirements, remote sensor configuration option is available.

Sensorex    Garden Grove, CA 92841
Apr 28, 2011 When combined with TCSMA or TCSTX toroidal transmitter, TCS3020 toroidal sensor offers complete conductivity measurement system. Sensor is designed for 0-1,000 mS performance and provides non-contacting, inductive type conductivity measurement. Resistant to corrosion, coating, and fouling, product is suited for long-term deployment without any maintenance. Construction is of Noryl, operation is rated up to 150 psig, and solvent tolerance and temperature stability are rated to 105°C.

CAS DataLoggers, Inc    Chesterland, OH 44026
Apr 27, 2011 Suitable for thermal sterilization work up to 175°F, including bedbug extermination, Thermal Remediation Verification Kit proves temperature was reached and maintained above critical point to guarantee eradication. Kit includes 6 wireless temperature data loggers and 10 ft probe to monitor temperature in narrow spaces such as between mattresses and inside walls. Three loggers have internal temperature sensors ranging from -40 to 80°C, and 3 feature external sensors measuring -60 to 155°C.

AutomationDirect.com    Cumming, GA 30040-9905
Apr 27, 2011 Photoelectric sensors in GX series are available in rectangular plastic DC models, which are IP67-rated and have 18 mm dia threaded lens and M12 quick-disconnect. GX3 series diffuse photoelectric sensors feature fixed sensing distances of 100 or 150 mm, while GXP series polarized reflective photoelectric sensors have sensing distances of up to 20 m. Through-beam photoelectric models of GXR/E series feature sensing distances of up to 4 m.

Ingersoll-Rand Co.    Annandale, NJ 08801
Apr 27, 2011 With cache mode option, Schlage WPR400 is suitable for offline applications such as attendance, event admissions, checkpoints, signal testing, mustering, and perimeter expansion. Unit is also field-configurable to work as wireless portable signal tester. Featuring red and green LEDs that indicate valid and invalid credential status, battery-powered reader communicates to access control systems via Schlage PIM400 Panel Interface Module.

STMicroelectronics    Lexington, MA 02421
Apr 26, 2011 Model LSM303DLM geo-magnetic digital compass module offers 3-axis sensing of linear and magnetic motion. Built into 5 x 5 x 1 mm package, MEMS-based unit also provides 6D orientation detection; 2 programmable interrupt signals that enable notification of motion detection and free fall; and wake-up/power-down functions. Operating power consumption is 360 µA and product has accurate output across full-scale ranges of ±2, ±4, and ±8 G and from ±1.3 up to ±8 Gauss.

Eriez Magnetics    Erie, PA 16506
Apr 26, 2011 Eriez Pull Test Kit helps monitor efficiency of magnetic separator by measuring holding force of magnet. This quality assurance device includes one graduated scale, 4 non-magnetic spacers (¼, two ½, and 1 in. thick), one 1/8 x 1 x 3 in. steel plate, one 1/8 x 1 x 3 in. steel plate with attached radius non-magnetic spacer, one 1 in. dia steel ball, and one ¼ in. dia steel ball, all housed in hard plastic case. Kit is designed for use on variety of magnetic separators.

Cal Sensors, Inc.    Santa Rosa, CA 95403
Apr 26, 2011 With sensitivity of 1.5 x 10¹⁰ Jones in 1-5 µm wavelength region, Lead Selenide Position Detectors can identify and track location of infrared sources. Multi-channel format allows technology to zoom in on hot spots or other IR emissions, making detectors suitable for weapons targeting, security and defense counter-measures, and hot spot detection for fire fighting. Integrated software provides real-time streaming data on target position relative to detector location.

Paine Electronics, LLC    East Wenatchee, WA 98802
Apr 25, 2011 Designed for downhole environments, 212-40-020 Series employs Silicon On Insulator (SOI) technology and survives temperatures from -40 to +437°F and pressures from 0-5,000 to 0-30,000 psia. Products feature amplified voltage output and measure less than ½ in. dia. Alternate pressure port fittings and electrical connections are available to meet specific requirements.