North Safety Products, Inc.
Cranston, RI 02920
Apr 12, 2006 Model ER2000CBRN Emergency Escape Respirator offers 30 minute protection from non-immediately dangerous to life and health atmospheres containing chemical, biological, radiological, and nuclear respiratory hazards. It features translucent polyurethane, universally-sized hood with head harness and dual cartridge design for user comfort. Respirator comes equipped in sealed inner bag and double lined, belt-mounted nylon carry bag, and training kit is also available.

MSA
Pittsburgh, PA 15230 0426
Nov 28, 2005 Hood-style Safe Escape(TM) Respirator enables users to escape from threatening situations by providing respiratory protection as well as head and neck protection from chemical, biological, radiological, and nuclear agents. Canister containing CBRN particulate filter and activated carbon is permanently bonded to respirator coupling nut. Inlet check valve optimizes filter performance, minimizes lens fogging, and reduces carbon dioxide buildup inside translucent hood.

Milwaukee Electric Tool Corp.
Brookfield, WI 53005-2550
Nov 10, 2005 Heavy Duty Job Site Armor(TM) equipment meets or exceeds standard industrial safety guidelines. Line includes lightweight wrap-around frame and frameless safety glasses and impact goggles that meet ANSI Z87.1-203 standards, Frame Series of gloves with reinforced wrist cuffs and hook and loop closure, NIOSH N95 Class Respirator with adjustable boom nosepiece, and corded and disposable earplugs, as well as folding earmuffs with noise reduction ratings of 27+dB.

Modern Safety Techniques
Hicksville, OH 43526
Nov 09, 2005 Portable, continuous-use Respiratory Protectors(TM) provide clean, humidified air to workers, while allowing freedom of movement. Units convert carbon monoxide to carbon dioxide as well as remove other toxic gases from breathing air. Utilizing low temperature LT CAT(TM) catalyst, systems do not require desiccant dryers. Available in 10 and 50 scfm models, Respiratory Protectors are packaged in weatherproof enclosure and include carbon monoxide monitor.

DeVilbiss , ITW Industrial Finishing
Glendale Heights, IL 60139
Jul 14, 2005 Suited for finishing operations that require face masks, Air Vizorâ„¢ air supplied respirator features face mask with glare-reducing visor window, detachable hair and neck cover, and ratchet-adjustable headgear. System also includes belt-mounted filter, regulator, and breathing air tube. Air filtration units converts shop air into clean, dry, contaminant-free air for breathing systems and spray operations, and rigid face piece ensures visibility over time.

North Safety Products, Inc.
Cranston, RI 02920
Jun 14, 2005 Belt-mounted, PAPR is available with 2 blower/battery assemblies. One option, for tight fitting facepieces, converts half masks and full facepieces to PAPR without tools or adapters. User can also choose from selection of loose fitting facepieces or bibbed hoods. With nickel metal hydride battery providing steady power for 8 hr, respirator is suited for abatement market, pharmaceutical industry, smelting operations, and hot work environments.

Gateway Safety, Inc.
Cleveland, OH 44131 1045
May 25, 2005 Featuring molded shell that facilitates breathing process, TruAirâ„¢ air purifying respirators have soft foam nosepiece, non-latex elastic head straps, and adjustable nose clip. Design ensures quality fit, even for those wearing respirators all day long. NIOSH-approved product comes in 3 levels of protection: TruAir, offering N95 level filtration; TruAirâ„¢ Plus, providing N99 filtration; and TruAirâ„¢ Ultra, supplying P100 class protection.

Gateway Safety, Inc.
Cleveland, OH 44131 1045
Dec 22, 2004 PeakFitâ„¢ Respirators are NIOSH approved N95 masks with large contoured design that facilitates breathing and minimizes worker fatigue. Pre-shaped, molded nose bridge fits virtually any facial contour. Soft, closed-cell foam on inside of mask helps to ensure wearer comfort, and design of mask's adjustable, latex-free, cloth head strap allows for custom fit. All PeakFitâ„¢ models provide protection against variety of contaminants.

Bacou-Dalloz
North Smithfield, RI 02917
Jun 17, 2004 SAF-T-FIT® PLUS respirators are available in all N, R, and P filter classes, featuring optional nuisance level organic vapor or acid gas filtration. They offer roomy, facepiece for less breathing resistance, and large inner volume to facilitate verbal communication. PVC material in Boomerang Nose and Polo-face seals provides wearer comfort. Latex- and silicone-free respirators provide NIOSH Approved TC-84A-3745 protection in wide range of applications.

Sentry Air Systems
Houston, TX 77092
Apr 02, 2004 Model SS-330-PFH Positive Flow Hood and Model SS-448-PLF Positive Laminar Flow Hood incorporate fan on top and use Prefilter/HEPA/ULPA filters to keep work area free from contaminants and particulates. Perforated baffle maintains low turbulence flow of filtered air continuously throughout enclosure. Depending on model, max airflow velocity ranges from 350–700 cfm; variable speed control is standard on each unit. Both models provide full visibility of work area.

Survivair, Inc.
Santa Ana, CA 92704
Nov 21, 2003 QuickPro® Chemical-Biological Escape Hood Respirator provides respiratory protection in event of nuclear, biological, or chemical (NBC) incident. Dual zone protection system combines neck seal with Omni-Fit silicone nose cup. Adjustable, dual-strap harness system with guide loops keeps hood in place during escape. Anti-fog, wraparound visor provides minimal distortion, and low breathing resistance feature allows wearer to run or walk quickly.

Kaeser Compressors, Inc.
Fredericksburg, VA 22404
Nov 03, 2003 Series KBS Systems allow compressed air to be used as source of purified air. Portable units offer capacities of 10 scfm, and stationary units range from 12–880 scfm. Systems remove excessive moisture, dirt, dust, oil and oil vapor, carbon monoxide, and other hydrocarbons from compressed air to prevent worker health and safety risks. Options include switching failure alarm, carbon monoxide monitor, and electrical NEMA rated enclosures.

Hornell, Inc.
Twinsburg, OH 44087 2340
Aug 18, 2003 Speedglas® FlexView with Adflo® combines retractable auto-darkening lens with powered air purifying respirator. User lifts up spring-mounted lens assembly for weld prep. Spring holds auto-darkening lens on top of helmet providing clear view behind clear polycarbonate lens, which meets ANSI Z87.1 standard. Adflo respirator creates positive atmosphere of filtered air within helmet that is 25 times cleaner than air outside of helmet. Respirator approval is NIOSH 42 CFR 84.

North Safety Products
Cranston, RI 02920
Jul 09, 2003 Hood-style escape respirator ER1000 provides 30 min (minimum) of respiratory and face protection from nuclear, chemical, and toxic industrial materials as well as biological agents. Able to be donned and functioning within seconds, unit includes translucent hood and half-mask design that limits re-breathing of exhaled air. Anti-fog and scratch-resistant lens provides wide field of vision, while front-mounted exhalation valve enables users to speak normally.

TSI Inc., Flowmeter Div.
Shoreview, MN 55126
May 15, 2003 OSHA-accepted PORTACOUNT® N95 quantitatively measures how well N95 respirators fit. Software automates fit test, eliminating procedural errors, and stores results in database. PRESSURA® room controls, suited for airborne-isolation rooms, measure actual room pressure differential, warning health-care staff if it drops to unsafe levels. Controller versions modulate exhaust air volume to correct for room pressure fluctuations as they occur.

Bio-Medical Devices International
Irvine, CA 92614
May 06, 2003 NIOSH-approved, MAXair PAPR system delivers continuous airflow of 6–8 cfm to provide comfortable protection for hazardous dust and mist environments. Quiet, helmet-mounted motor circulates air over face, eliminating fogging. HEPA filter uses lead-acid gel batteries housed in lumbar support belt or lightweight, clip-on, Lithium-ion battery. MAXair system includes helmet, 3 HEPA filter hoods, foam prefilter, battery, belt, and charger.

Draeger Safety, Inc.
Pittsburgh, PA 15230
Apr 14, 2003 X-plore products provide protection from hazardous compounds via face-seal. X-guided strap ensures even distribution of mask against face, and low-profile design provides unobstructed field of vision. Two-point Bayonet connection allows both filters to be attached to mask using same technique. Available X-plore masks include models 3300 and 3500 (hypoallergenic) half mask cartridge respirators and model 5500 full face mask with triple sealing edge.

3M Co./Corp. Mktg. & Public Affai.
St. Paul, MN 55144 1000
Dec 19, 2002 Kit contains one 3M full facepiece respirator 6000 Series, 2 pair of 2097 filters, and educational mold remediation brochure. Respirator meets EPA guidelines for mold remediation jobs of all sizes. It protects against eye-irritating mold while providing wide field of vision for safety. Filters reduce exposure to mold spores and provide carbon layer for nuisance-level protection from odors (VOCs) associated with mold.

Hornell, Inc.
Twinsburg, OH 44087 2340
Dec 06, 2002 Polycarbonate ClearVisor Face Shield offers wide viewing area while providing workers with protection from high impact hazards. Adflo® powered respirator is used with high efficiency particle filter. System includes brushless motor and Automatic Airflow Control for constant airflow, regardless of battery charge or filter loading. Face shield meets ANSI Z87.1 standards for industrial eye and face protection, and respirator is NIOSH 42 CFR 84 approved.

3M Co./Corp. Mktg. & Public Affai.
St. Paul, MN 55144 1000
Oct 07, 2002 Suited for domestic preparedness applications, Full Facepiece Respirator 6000 Series provides negative/positive pressure operation and can be paired with 3Mâ„¢ cartridges to protect against tear agents and most military and industrial materials. Respirator offers flexible silicone face seal and adjustable head straps for user comfort. Available in small, medium, and large sizes, units provide wide field of vision.