Viking Corp., The
Hastings, MI 49058 9706
Mar 24, 2008 VFR-400 includes 4 programmable class B initiating zones, 2 class B supervisory zones, and 4 programmable output circuits. Onboard, menu-driven programming with 12 pre-installed programs facilitates set-up. Panel is compatible with various initiating devices including linear heat detection, smoke and heat detectors, water flow indicators, low air pressure switches, and manual pull stations. The VFR-400 accommodates multiple voltage applications, including 110/220 V and 50/60 Hz.

EGS ELECTRICAL GROUP ? APPLETON
Rosemont, IL 60018
Feb 20, 2008 Made of red, epoxy powder-coated steel, fire and safety Outlet Boxes, Extension Rings, and Covers eliminate need for painting at job site. Boxes come in 4 in. and 4 11/16 in. square sizes, measuring 1 ½ in. and 2 1/8 in. deep, with welded or drawn construction to meet needs of commercial applications. Groundskeeper(TM) raised boss enables 3/8 in. ground screw to be threaded into box without contacting mounting surface. Standard flat ground tapped holes are also available.

AirSense Technology USA Ltd.
Portland, OR 97223
Dec 24, 2007 MatrixScan(TM) addressable virtual detector matrix system features sampling pipes routed from multiple detectors to crossover points, each with specific detector address. Each crossover is treated as independent device, having multiple alarm thresholds, smoke and level bargraphs. Up to 127 virtual detectors can be assigned per loop. MatrixScan configuration is implemented through function-setting dialog box accessible through Stratos UL Listed and FM Approved Command Modules.

Albemarle Corp.
Baton Rouge, LA 70820
Oct 02, 2007 Designed for optimal processing in compounding operations, MARTINAL® LEO helps optimize throughput of wire and cable manufacturing. This finely precipitated aluminum trihydrate (ATH) flame retardant benefits wire and cable compounders, as well as other plastics manufacturers, through its thermal stability, electrical properties, compound viscosity, and bulk density.

Locution Systems, Inc
Golden, CO 80401
Aug 16, 2007 Comprised of software and touch screen hardware, CADVoice® ZoneTracker(TM) allows fire and EMS personnel to tell fire station's alerting system where they are located in station and bunk room in which they will be sleeping. If 911 call comes through during night, system will automatically route dispatches, as well as lighting and tonal alerts, directly and only to rescue crew being dispatched for call, letting others sleep through night and speeding response times.

Lifeline Security Co.
Middletown, MD 21769
Jul 11, 2007 Equipped with military-grade high-intensity light stick, BREATH OF LIFE Breathing Hood kit gives user 20 min of breathing time. It filters out toxic smoke and blocks Ebola, Botulism, Anthrax, and other biological agents. See-through hood has multi-layered filter with active carbon that blocks out particles down to 0.3 microns with NIOSH efficiency rating of 99.9%. It protects neck, face, and head from burns and is capable of withstanding heat up to 400°F.

Bosch Security Systems
Fairport, NY 14450 9199
Jun 20, 2007 Strobe 420 Series fire detection device produces synchronized, high-visibility flashes at 1 Hz. Addressable device is loop powered, freely configurable, and allows users to program which strobe is switched on and in which event. Features include automatic component identification, address assignment support, 6 mA power consumption, and functional security. Device complies with EN 54-23 standard, and is safe for photosensitive individuals.

System Sensor
St. Charles, IL 60174 8021
Jun 13, 2007 Employing high-sensitivity laser sensor in air sampling duct housing, Model 7251DH, upon sensing sufficient smoke, initiates alarm signal at fire control panel monitoring detector. Proper steps can then be taken to identify source of concern and resolve it before activation of fire suppression systems or facility downtime. Detector meets needs of environments with high airflow and/or several air changes per hour, such as telecommunications facility or data center.

Hamworthy Peabody Combustion Inc.
Shelton, CT 06484
May 25, 2007 Able to sense presence and condition of flames, SmartScan(TM) 121 combines sensor technology and microprocessor control to discriminate between adjacent flames, fireballs, and radiating surfaces. Unit operates over -40 to +140ºF range and offers bar graph display as well as fuel select input for 2 fuel parameters. Suited for coal, oil, gas, solid, and non-standard fuel scanning, unit has online lens cleaning capability and is resistant to momentary power outages.

MSA
Pittsburgh, PA 15230 0426
May 22, 2007 Equipped with fire-resistant electronics, FireHawk M7 includes Personal Alert Safety System that sounds 95 dB alarm whenever firefighter becomes disabled or lies motionless for 30 sec at temperatures up to 500°F. Accountability System combines computer software with radio module to keep incident commanders apprised of multiple firefighter-related conditions, such as SCBA cylinder pressure, service-time, PASS alarms, thermal alarms, and battery status.

Spartan Motors, Inc.
Charlotte, MI 48813
May 09, 2007 Featuring tubular, stainless steel design with 1,000 lb capacity, Boomer(TM) combines elevation, water discharge, hydraulics and air, electrical, and lift functions. It includes 28 ft master stream that can be rotated 360° and elevated from -10 to +90°, as well as 6,000 W light tower with adjustable lights to direct illumination where needed. Connections are provided for high-pressure hydraulic rescue tools that provide life-saving functions at major motor vehicle accidents.

Bosch Security Systems
Fairport, NY 14450 9199
Mar 07, 2007 Mounted on outer surface of duct casing, air duct fire detector provides early warning of presence of smoke in building's heating, air conditioning, or ventilation ducts. Features include drift compensation in optical measurement and continuous intelligent analysis of sensor signals. Three tubes, 46, 91, and 152 cm, are available, and unit can be integrated into Local SecurityNetwork bus system as well as used with other ceiling-mounted, special detectors and select fire panels.

Air Products and Controls Inc.
Pontiac, MI 48340
Jan 04, 2007 Designed for use where air-sampling duct detectors cannot be used, HS-100 installs in surface- or pendant-mount configurations in air shafts, plenum spaces, and other low or no air velocity areas (100 fpm). All-in-one, low-profile design eliminates need for separate base or test unit and operates from range of voltage input options, including 230 Vac, 120 Vac, and 24 Vac/Vdc. Temperature coverage range spans 32 to 140°F for photoelectric model and 32 to 158°F for ionization model.

Fire-Lite Alarms
Northford, CT 06472 1653
Nov 01, 2006 Combining capabilities of fire alarm control panel and digital alarm communicator/transmitter, Model MS-9050UD provides complete fire control system for child care, auditoriums, theaters, and restaurants. With capacity of 50 addressable devices, it offers single addressable SLC loop and 2 onboard Notification Appliance Circuits. Additional features include 2 programmable relays, one fixed trouble relay, built-in programmer, and telephone line active LEDs.

Digital Monitoring Products
Springfield, MO 65803
Oct 27, 2006 Used with 1100D series receivers and XRSuper6, XR20, and XR40 control panels, Model 1161 Smoke Detector and Model 1162 Smoke/Heat Detector are available with sounder. Models feature 2-way wireless communications, enabling one person to confirm transmitter communication with receiver. Red Survey LED turns on when transmitter sends data to receiver and turns off when receiver sends acknowledgement. Model 1162 provides built-in fixed and rate-of-rise heat detector.

imRAC Inc.
Worcester, MA 01610
Aug 11, 2006 Monitair(TM) 3rd Generation (3G(TM)) Aspirated Smoke Detector (ASD) utilizes 2 opposing light sources with wide difference in wavelength to discriminate dust and steam from particles of combustion, minimizing occurrence of false alarms. Along with adjustable sensitivity, product offers analog (4-20 mA) and relay outputs for interface to PLC or Fire Alarm Control Panels. Duct detector version, also available, utilizes one-piece sampling Mono-Probe(TM).

Underwater Kinetics
Poway, CA 92064
May 23, 2006 Built for firefighters and housed in ultra-high-impact ABS plastic casing that will not dent or corrode, UK4AA eLED Fire Light features waterproof, twist-and-turn on/off bezel and Projection Optical System, which has max center beam brightness of 40 lumens and ensures there are no whiteouts, flarebacks, or reflective sidelights in smoke-filled environments. Twin-element optical system creates 13° smoke-cutting beam for close-up viewing and smooth, even illumination.

Air Products and Controls Inc.
Pontiac, MI 48340
Dec 21, 2005 Working with duct smoke detectors, Series MSR-100 indicates problems, performs tests, and alerts users to alarm conditions. For quiet service, ringback feature enables alarm buzzer to be silenced during problem inspection and remedy. Key-operated function enables users to test and reset from remote location and verify that detector is properly operating. Lever-operated No-Tools terminal block design eliminates terminal strip screws and wiring.

System Sensor Europe Ltd.
East Sussex Horsham  United Kingdom
Aug 11, 2005 Used in intelligent fire systems, M210E-CZ conventional zone interface module enables zone of up to 32 conventional 2-wire detectors to be managed by control panel via single module address on one loop. It is compatible with existing intelligent control panels and can be mounted in stand-alone enclosure or on 35 mm DIN rail. Along with optional short-circuit isolation, product features tri-color LED status indicator and can be installed without loss of protection.

Vishay Intertechnology, Inc.
Malvern, PA 19355 2143
Aug 04, 2005 Certified for use in fire-protective signaling systems, lead (Pb)-free TSAL6100X01 has narrow angle of half-intensity of 10°, forward voltage of 1.35 V @ 100 mA, and typ radiant intensity of 130 mW/sr @ 100 mA. It is compatible with lead-free processing in accordance with WEEE and RoHS and suitable for high pulse-current operation. Unit may be used in other applications such as remote controls and those relying on UL 268-compliant IR emitters.