Konstant Products, Inc.
Skokie, IL 60077
Jan 30, 2007 Designed to attach to column without additional fasteners, Protect-it(TM) devices minimize damage caused to pallet racking in event of forklift impact. They consist of outer wall that is integrally molded to series of curved spring-like energy absorbers at front and sides. Spring clips enable devices to securely grip column and automatically adjust width to suit variety of sizes. Available in recognized safety colors, protectors are effective down to -40°C/F.

Norplex Micarta
Postville, IA 52162
Jan 10, 2007 Installed using ordinary hand tools, Class 1-A fire-rated ShotBlocker(TM) provides projectile and ricochet resistance. Fiberglass laminate can be used in structures where ballistic protection is desired, such as government facilities, check cashing stations, armored vehicles, and commercial aircraft. Material can be cut and drilled in field with circular, table, or panel saws. It complies with applicable federal and state flame and smoke protection regulations.

Capital Safety Equipment Co.
Albany, NY 12205
Jan 10, 2007 Used in conjunction with lifting equipment such as cranes and hoists, Model AD412/300 Load Arrestor acts as back up safety device to stop dropping load if it breaks free from main support line. It is independent of primary lifting system and is suited for loads up to 300 kg. Compact, lightweight device helps avert damage to equipment and personnel in and around danger zone.

Rockford Systems, Inc.
Rockford, IL 61109 2695
Oct 31, 2006 Designed and constructed to meet OSHA Regulations and ANSI standards, Barrier Guards are made-to-order and are used on front, sides, and backside of machines to protect employees. Framework is extruded aluminum channel and attaches directly to machine using mounting bracket hardware. Depending on guard's application, different panel constructions are available, including ½ in. square mesh and polycarbonate panels.

Extreme CCTV Surveillance Systems
Burnaby V5A 3C2  Canada
Oct 11, 2006 Featuring machined metal ball design with twin support arms, Moondance Ballistic is vandal-proof, hurricane-proof PTZ speed dome designed for hostile environments. Constructed of 316 SS, Moondance incorporates flat, wiper-equipped UL752 Level 1 ballistic window that optimizes optical performance and protects from gunfire attack. Moondance Ballistic can be surface, wall, ceiling, or pole mounted and captures surveillance images from above and below camera.

Standard-Knapp, Inc.
Portland, CT 06480
Sep 22, 2006 Operating at speeds from 100 to 1,600 bottles/min, Zero-Gap infeed packaging machine incorporates precise geometry and sensors to ensure continuous container supply to downstream lanes and grouping section. Line pressure and handling properties make system suitable for compressible or hot-filled PET, lightweight glass, and aluminum. Compatible with variety of platforms, it can be programmed to handle round containers of all sizes.

Fortress Interlocks Ltd
Erlanger, KY 41018
Sep 12, 2006 Requiring no drilling or brackets, eGard system for machinery guarding applications screws on to standard aluminum extrusions. Featuring module connections, system clips together, eliminating need for separate gate switch and control panel. Combining access and control technology, modular system features self-configuring internal network and quick disconnect cable for connecting electrics. Available actuators connect to any sliding or hinged door.

Rite-Hite Aftermarket Corp.
Milwaukee, WI 53223
Aug 16, 2006 Providing barrier that stretches across door opening, Door Dok-Guardian(TM) unit can stop 10,000 lb fork truck traveling at 3-4 mph. It consists of 6 in. high heavy-duty nylon strap mounted to Universal GX-4000 bottom sectional door panel, and travels with door when it is opened or closed to help prevent material handling equipment from traveling off dock. When dock door is closed, strapping and steel impact brackets slide into steel Warden door guards.

ERICO, Inc.
Solon, OH 44139-2631
Aug 14, 2006 Installed vertically or horizontally on racks, ceilings, and walls, CADDY® CATCR50 plastic, low-voltage cable support is designed for use with CAT 5e and higher, fiberoptic, and coaxial cable. Rounded edges avoid over-bending and kinking of cables, and closure has locking teeth that retain bundled cable in one-piece support. UL®-recognized for air-handling spaces, product requires nail, screw, push pin, or pop rivet for complete installation.

Adaptaflex Limited
Coleshill Birmingham B46  United Kingdom
Aug 14, 2006 Non-metallic UL1696 nylon flexible tubing system is designed for protection of electrical cabling to meet harmonized UL1696 standard. Lightweight and flexible, system features push and twist Adaptalok fittings for liquid tight performance. System is fire resistant and suited for use on machinery, machine tool, process plant, production equipment, and public buildings.

Vista System
Sarasota, FL 34234
Aug 01, 2006 Requiring screwdriver for assembly, triangular freestanding pylon systems allow for use of standard signage substrates such as plastics, metals, and paper. Users can create signage and then flex and pop it into structure. Printed material is changed out with use of Vista Key suction cup. Offered in 14 widths from 4-40 in., products can be ordered in various heights and 3 finishes. Bases are available for permanent and portable applications.

Lloyd Industries Inc.
Montgomeryville, PA 18936
Jul 19, 2006 Fiberglass plenum box with ceiling radiation damper is designed as 1 and 1.5 in. thick rigid ductboard with registers/grilles or drop duct applications. Available in I, J, and K models with standard sizes ranging from 8 x 4 to 16 x 16. J and K models are offered in either R4.2 or R6.0 insulation thickness. All ceiling radiation dampers hold ARL approval for 1 hr fire resistance rating for use in UL Fire Resistance Rated Wood Truss Assemblies.

SPX Dock Products
Carrollton, TX 75006
Jun 14, 2006 Built to stop 10,000 lb load moving at 4 mph, manually operated APS Dock Impact Barrier minimizes occurrence of accidents resulting from fork trucks, pallet jacks, and pedestrians falling off dock when overhead door is open. Traffic-stopping barrier bar is constructed of 9/16 in. thick steel cable inside flexible fiberglass rail, which latches securely into place. Highly visible yellow nylon webbing provides additional visual barrier at dock.

SICK, Inc.
Minneapolis, MN 55438
May 17, 2006 As safeguarding solution for point of entry applications, M4000 Advanced provides access protection to various machine applications. Product uses corner mirrors to protect up to 4-sided applications and does not require PC. When used with UE403 Muting Module, product offers solution for decentralized conventional muting applications involving automatic material transport. Integrated LED status indicator mounted on end cap is visible from any direction.

Hoffman
Anoka, MN 55303 1778
Mar 31, 2006 Comprised of INTERSAFE(TM) Data Interface Ports, window kits, folding shelves, CONCEPT® Keyboard Box, and external data pockets, Arc Flash Safety System provides safe exterior access to controls, protecting workers against arc flash explosions. Data Interface Ports provide data access without opening enclosure doors. Connectors interface with all major data and industrial communication protocols and either breaker-protected GFCI or standard duplex outlet.

Bosch Rexroth Corp., Linear Motion & Assembly Technologies Div.
Buchanan, MI 49107-1801
Mar 29, 2006 Model VE2/MP multipole conveyor stop gate with SmartStop(TM) technology offers functionality of VE2 stopgate, pneumatic solenoid valve, embedded microprocessor, 3 proximity sensors, and array of LED indicators to provide operations control and feedback in self-contained package. It includes two 3-pin connector plugs that provide 6 I/O connections, and 8 LED displays that provide visual indication to operational status of stop gate. Unit bolts into T-slot on extruded aluminum conveyor profile.

Safety Technology International
Waterford, MI 48327
Jan 31, 2006 Measuring 10.5 in. dia, Clock/Bell Damage Stopper®, model STI-9631-R, protects clocks/bells against vandalism and accidental damage. It consists of 9-gauge steel wire coated with corrosion resistant red polyester, and is suitable for areas where abuse is severe or clocks/bells operation is imperative.

Kee Safety, Inc. (formerly Kee Industrial Products, Inc.)
Buffalo, NY 14206-2665
Jan 19, 2006 Kwik Kit® safety barrier system, used around areas where personnel access should be restricted due to safety concerns, complies with OSHA and BOCA standards. Requiring hex key to tighten set screws to assemble unit, product is put together by placing supplied horizontal rails through pipe fittings on pre-assembled uprights. Pipe fittings are supplied as Kee Klamp® malleable cast-iron or Kee Lite® aluminum, and 1.9 in. OD pipe is powder-coated in safety yellow finish.

Rite-Hite Aftermarket Corp.
Milwaukee, WI 53223
Jan 16, 2006 Designed to define and separate areas in facilities, GuardRite® SB3 is constructed from 6 in. high nylon restraining straps and is available in 43 in. high double strap system. Yellow straps provide visibility while absorbing impacts from material handling equipment. Safety yellow, powder-coated 5 x 5 3/16 in. steel posts support restraining straps and provide barrier capable of withstanding 10,000 lb fork truck traveling at 4 mph without damage.

SICK, Inc.
Minneapolis, MN 55438
Oct 20, 2005 With beam spacing of 300, 400, 450, 500, and 600 mm, multiple light beam safety device, Model M4000, offers mounting flexibility via 3-groove housing and swivel mount end caps. Corner mirrors enable unit to protect up to 4-sided applications, such as entire robot cell. Integrated LED status indicator mounted on end cap is visible from any direction. Model M4000 requires no PC and can be directly linked to AS-Interface Safety-At-Work bus.