Safety & Security Equipment ->
Barriers & Guards ->
(Showing headlines 1 - 20) more ....
Vapor Retarder and Air Barrier protects roofing.
Duro-Last Roofing, Inc.
Saginaw, MI 48601
May 13, 2014
Composed of self-adhesive SBS modified bitumen with polyethylene facer on top surface and silicone release film on bottom, Duro-Guard® SOPRAVAP’R addresses movement of air in roof assemblies as required in 2012 International Energy Code. Product can be installed on steel, plywood, gypsum, concrete board, asphalt panel, or concrete deck. When correctly engineered into roof assembly, it will contribute to long lasting thermal and waterproofing performance in all climate zones.
Insulation Boards offer one-step installation.
Duro-Last Roofing, Inc.
Saginaw, MI 48601
Apr 23, 2014
Combining flute fill with 4 x 8 ft flat panels, EPS Flute Fill Combo Boards are available with factory-laminated, fire-rated coated-glass fiber mat or polyester facer over expanded polystyrene insulation. Boards are designed for metal building retrofit applications that employ mechanically attached or Duro-Bond® induction welding systems. Providing code approvals, stable R-values, and moisture resistance, boards are 100% recyclable and have no formaldehyde or ozone-depleting CFCs or HCFCs.
Sharp Edge Personal SRL features foot level tie-off.
Capital Safety Australia & New Zealand
Silverwater NSW 2128 Australia
Mar 12, 2014
Engineered for foot level tie-off and sharp edge applications, Nano-Lok™ edge includes flexible galvanized cable or webbing lifelines, integrated backpack style energy absorber, and harness connector. Components work in concert to absorb and limit arresting forces in event of a fall and mitigate effect of sharp edge on lifeline even under harsh conditions. Available in single or twin (100% tie-off) units, ergonomic SRL (self-retracting lifeline) incorporates 2.4 m working length lifeline.
Complete Parking Structure System helps prevent breakdown.
Muskego, WI 53150
Mar 04, 2014
Consisting of multiple components, Parking System Solution helps protect parking structures from abuse from cars as well as seismic, thermal, and wind activity. System includes 787P Series Joint with profile that minimizes impact and noise of vehicular traffic; Easy Install Compression Seals, which toughen parking structures against thermal movement and weather damage; and combination of corner guards, dock bumpers, and wall guards that add cushion to spots most likely to be damaged by cars.
Portable Weld Curtains set up and break down in seconds.
GORTITE, A & A Manufacturing Co., Inc.
New Berlin, WI 53151
Feb 19, 2014
Suitable for MIG, TIG, and stick welding, Portable Weld Curtains provide protection against UV radiation. Units feature heavy-duty steel construction with highly visible safety finish, steel outrigger that creates stable base, and removable shade that can be replaced. Weighing 37.5 lb, curtains can be transported to new workstations using lift handle. Other uses include work cell separation, privacy wall to block distracting views, and to aid in containment of sawdust or other light debris.
Compound System waterproofs underground cables.
Hendrix Wire & Cable Corp.
Milford, NH 03055
Dec 18, 2013
Providing dual water blocking capability on primary, underground cable, DUAL BLOCK™ prevents water from entering cable core. First, fill compound is continuously applied into conductor interstices, preventing longitudinal water migration. Then, water-swellable powder is applied under polyethylene jacket, preventing water from migrating along neutral wires under jacket. DUAL BLOCK™ is available as option for all stranded conductor cables.
Thermal Blanket accommodates all actuators.
Indelac Controls, Inc.
Florence, KY 41042
Dec 17, 2013
Acting as thermal barrier with max service temperature of 550°F, ThermoGuard Blanket helps save energy, retain radiant heat, and optimize surrounding work environment. Outer and inner jacket is made of PTFE Teflon® impregnated fiberglass cloth, while insulation consists of 11PCF Fiberglass Needled Mat – Type E fiber. Inner jacket also has layer of Type 304 SS knitted wire mesh. Supplied with fasteners for installation, blanket withstands chemical environments and variety of weather conditions.
Glass Gauge Shield protects against high-pressure leaks.
Clark-Reliance Corp., The
Strongsville, OH 44136
Dec 10, 2013
Made of Lexan® polycarbonate and available in lengths to fit flat glass gauge styles, Safe View™ Shields retrofit to Jerguson® level gauges or similar gauges to protect nearby operators from high pressure leaks. Protective shields, suited for use on armored glass liquid level gages, install within few minutes.
Barrier Liner targets bag-in-box foods.
Hagerstown, MD 21740
Dec 09, 2013
Offering blend of moisture barrier, mineral oil barrier, and breathability, Amcor Vodex Generation II helps ensure food protection and safe consumption. Recyclable, co-extruded packaging solution additionally provides aroma and flavor retention, easy-opening, and ability to be tailored to specific product needs, with features such as puncture resistance.
Mineral Wool Insulation Batt suits residential construction.
Wabash, IN 46992
Nov 01, 2013
Suited for residential and light commercial applications, UltraBatt™ combines thermal comfort, fire protection, and sound control in one product. In exterior walls, product conserves energy with R-15 in 2 x 4 construction and R-23 in 2 x 6 construction. Made with 70% pre-consumer recycled content, insulation is fire resistant to temperature over 2,000°F, and provides STC rating of 30 in 2 x 4 wall assemblies with single layer of gypsum on both sides.
Pallet Guards keep pallet hidden, but product visible.
Twinsburg, OH 44087
Sep 19, 2013
Measuring 6 in. high, Adjustable Pallet Guards fit around wood pallets, concealing sharp, unsightly corners. Units prevent damage to products, help ensure customer and employee safety, and create aesthetically pleasing display. Adjustable from 28–54 in. W, guards are made from black high impact polystyrene, which facilitates cleaning and enables reuse.
Fall Protection Device simplifies self rescue.
St. Paul, MN 55144
Aug 09, 2013
Without requiring any specialist training, Latchways Personal Rescue Device (PRD) with 3M Elavation Harness enables unassisted, gentle self-rescue. Backpack is activated by pulling cord. In event of fall, 3M Elavation harness suspends wearer, while Latchways PRD, which can extend up to 65 ft, allows for steady descent to ground via braking mechanism. If wearer cannot initiate self-rescue, device can be activated by another person via built-in secondary release mechanism.
Remote Racking System mitigates arc flash hazards.
Remote Solutions, LLC.
Tucson, AZ 85745
Aug 07, 2013
Employing Mil-Spec design and self-diagnostic capabilities, Safe-T-Rack® SR-U offers fully automated, ANSI-tested tool for circuit breaker remote racking and control. Portable system features rechargeable 28 V battery power for international use, universal handheld controller and drive unit, quick-change tool coupling, smart drive bracket design, and endlessly expandable data-bus. System offers users of low and medium voltage circuit breakers with alternative to arc flash protection garments.
Wall Guards prevent stains, bacteria from hand dryer blown water.
Newton Distributing Co, Inc.
Newton, MA 02465
Jul 18, 2013
Designed to prevent water from leaving marks on walls, Microban® Anti-Microbial Wall Guards are made to fit underneath XLERATOR hand dryer and also promote 99.5% bacteria-free surface area. These washroom accessories measure 32 x 16 x 1/16 in. and come in white or black. Stainless Steel is also available. Installation requires heavy-duty adhesive, such silicone, or 4 strips of construction-grade 3M adhesive tape.
Recycled Nonwoven Fabric acts as long-term weed killer.
Spartanburg, SC 29307
Jun 18, 2013
Made with repurposed materials, GGT W.K WEED KILLER is landscaping weed control fabric that delivers 20+ years of weed-free flower beds and gardens. This nonwoven weed barrier, commonly used under walkways and driveways, is also used in walkways and retaining wall projects for materials separation and soil retention.
Fan Guard/Filter Assemblies protect sensitive electronics.
Keystone Electronics Corp.
Astoria, NY 11105
May 31, 2013
Designed to protect PCs as well as switching equipment, telecom panels, and other devices, multi-element Fan-Guard/Filter Assemblies deliver consistent, 24 cpm air flow and particle security. Guards and Retainers are manufactured from glass-filled nylon, while media filters are made from polyester foam and aluminum screens. Snap-Fit Filter and Retainer design facilitates installation, maintenance, and filter media replacement, all while guard remains firmly in place.
Roll-Up Screens and Doors offer high-speed operation.
TMI International, LLC
Pittsburgh, PA 15205
May 10, 2013
By reducing exposure time between environments, 6000 Series, which includes Screen-Pro®, Vinyl-Pro, and Bird-Pro roll-up screens, doors, and barriers, minimizes unwanted insect, bird, dust, and particle infiltration. External jackshaft motor moves doors at 36 ips, allowing service in various applications. Products separate differing environments within and around facility while also helping meet AIB International Consolidated Standards for Inspection.
Passive Needle Guard features FDA 510(k) clearance.
Becton Dickinson & Co.
Franklin Lakes, NJ 07417
Apr 24, 2013
Designed to meet complex biotechnology drug requirements, BD UltraSafe PLUS™ offers needlestick safety in one-handed device that integrates ergonomic features which foster comfort and support for healthcare providers and patients. Plunger rod helps support injection of viscous drugs, while size of drug inspection window promotes drug visibility. This anti-needlestick safety device also has built-in finger flanges and plunger head that increase injection support and stability.
Insulation System promotes installation flexibility.
Champlain, NY 12919
Apr 23, 2013
Combining flexibility of tape with benefits of removable insulation blankets, T-Wrap™ features silicone coated fiberglass outer cover, ¼ or ½ in. fiberglass insulation underneath, and velcro hook and loop strips that line either side to facilitate fastening/removal. Product can be applied straight on over pipe or wrapped around pipe in spiral fashion, comes in 20 ft lengths, and can be cut to shorter lengths using scissors. With respective ODs of 0.25–4.00 in., sizes range from 4–17 in.
Military Helmet combines ergonomics and ballistics protection.
FMS Enterprises Migun Ltd
Apr 15, 2013
Constructed from High Performance Polyethylene (HPPE) Unidirectional (UD) materials, chemical- and water-resistant Ballistic helmet Shell weighs 1,250 g, comes in PASGT and MICH shapes, and completely stops 5.56 and 7.62 mm cartridges as well as 7.62 mm pistol steel core rounds. Helmet fully complies with MIL-STD-662F requirements and meets NIJ Ballistic standards. To allow for painting of complete helmet, shells can be supplied with thin aramid cover.
(Showing headlines 1 - 20) more ....