Schunk
Morrisville, NC 27560
Sep 22, 2006 Designed to fit O-rings not only to shafts, but also in holes, 6-finger Model ORG 85 features integral stroke and triple jaw sets that move independently from one another. O-ring is first released from first 3 fingers, and then released from last 3 fingers in controlled manner. Clamping width of diameter to be fitted ranges from 5-150 mm. Stroke of 2 sets of triple jaws range from 0-21 mm for triple jaw A and from 0-15 mm for triple jaw B.

CPS Technologies Corp.
Norton, MA 02766
Jul 24, 2006 End effectors have strength and stiffness of steel at one-third the density. Effectors are made from CPS metal matrix composite, AlSiC (aluminum silicon carbide). Using QuickCast(TM) process, manufacturer can integrate fiber optic feeds, wafer shoes, and location pins during production. Coatings include Ni plating, anodization, and Teflon impregnated anodization. Effectors are suited for robotics and automation industry, and are hermetic vacuum compatible.

DE-STA-CO Industries
Madison Heights, MI 48071
Oct 28, 2005 Based upon modular concept with accessories such as automatic tool changers, compliance devices, robotic adapter plates, vacuum cups, and sprue cutters, MET Modular End Effector Tooling System can be reconfigured, re-used, or interchanged with other units. Lightweight aluminum system can be mounted to robot in end-mount cantilever style or mid-mount configuration. It offers 360° positioning, vision camera mount, and 5-pin electrical connector option.

Robohand, A De-Sta-Co Div.
Madison Heights, MI 48071
Apr 27, 2005 Model QC-1200 automatic tool changer accommodates different styles of parts on same assembly machine. Modular design options include Device Net Bus module, self-sealing fluid or pneumatic module, 19 pin I/O module, and 200 A weld power module. Integral latch/unlatch sensor signals coupled condition of tool changer. Unit meets demands of robotic resistance welding and material handling applications.

Explore1.ca
Aurora L4G 6H8  Canada
Jan 19, 2005 Hydaulically powered 5-Axis End Effector utilizes vacuum connection system for lifting and positioning pre-glazed curtain wall panels and other architectural components weighing up to 3,000 lb. End effector mounts to tangs of most 6,000–10,000 lb variable reach forklifts and uses up to 16 vacuum cups in customizable configurations. Six remote functions enable installers to move panels from horizontal plane to vertical plane with smooth precise movements.

Positech Corp.
Laurens, IA 50554-1299
Oct 15, 2004 When used with appropriate lifting device, wheel handling end effectors improve operator's ability to lift and position wheels through manufacturing process. Lifting device and end effector have powered functions for lift and grip forces, which minimizes risk of injury to upper body, arms, and hands. Applications include pick/place transfers, loading vertical/horizontal chucks, or rotating wheels for inspection.

Techno Sommer Automatic
New Hyde Park, NY 11040
Aug 04, 2004 Operated with 90 psi shop air, SCH20 and SCH23 robotic, pneumatic end effectors utilize 2 sets of needles that extend from gripper at 120° angle to pick up porous sheet materials. Dual sets protrude in opposite directions for firm hold on material, while reducing bunching and pinching under gripper. Depth of stroke of needles can be mechanically adjusted from 0-6 mm. Able to handle up to 9 lb sheets, SCH20 has 1.3 mm dia needles, while SCH23 has 3 mm dia needles.

Anver Corp. - Anver.Com
Hudson, MA 01749
Jul 29, 2004 Utilizing foam vacuum pads, custom built Job Site End-Effector Systems bolt onto outdoor mobile cranes and boom extensions to handle tile, concrete, and glass panels that measure up to 10 x 40 ft and weigh up to 10,000 lb. Items are picked up from top surface without slings or blocking, facilitating alignment and installation processes and preventing damage. They employ fully redundant vacuum systems and are constructed with 4:1 safety factor.

DE-STA-CO Industries, A Dover Resources Co.
Madison Heigths, MI 48071
Oct 30, 2003 Configurable Modular End Effector Tooling System (MET) offers accessories such as automatic tool changers, compliance devices, robotic adapter plates, vacuum cups, and nipper mounts. Made of aluminum, it can be mounted to robot in end-mount cantilever style or mid-mount configuration. Features include 360° positioning, quick-disconnect air ports, vision camera mount, and bayonet with 4 air ports and air shut off.

Robohand Inc.
Monroe, CT 06468 2653
Aug 28, 2002 CV vertical compliance devices detect axial misalignment between two parts during assembly process or loading application. CH horizontal compliance devices work when lateral misalignment is present during assembly or loading application. Units provide lateral and rotational compliance to reduce jamming and misalignment. AU series emergency stop modules protect robots or other equipment from loads caused by collisions, excessive moment loads, and programming errors.

Anver Corp. - Anver.Com
Hudson, MA 01749 3214
Aug 01, 2002 Job Site Vacuum End Effector Systems bolt onto boom extensions and mobile cranes to permit installation of large stone, concrete, and glass panels. They eliminate need for mechanical devices and straps that can damage edges and interfere with alignment. Powered by host equipment's hydraulic and electrical systems, end effectors can handle panels up to 10 x 40 ft and weighing 10,000 lb. Fully redundant systems have 4:1 safety factor.

Conec, Inc.
Bowmanstown, PA 18030
Mar 12, 2002 Ergonomically designed AirOrail clamps, lifts, and rotates all types of products and configurations weighing up to 500 lb. Pneumatically controlled unit uses shop air, eliminating need for electrical components. Vertical rail meets OSHA guidelines for hand and motion movement and will not cause ailments such as Carpal Tunnel Syndrome.