Kornit Digital Ltd.    Moshav Magshimim   Israel
Feb 01, 2011 Kornit Avalanche 951 industrial Direct-To-Garment printer, suited for mass production of light and dark garments, generates 4-color process prints at high speeds. System has 8 CMYK and 4 white print heads and utilizes formaldehyde-free V323 ink series digital textile ink. Incorporating 23.5 x 35 in. printing area, printer also has PreT automatic pre-treatment system that eliminates need for secondary operations. Product is suited for use with XXL garments and cut pieces.

Mokon    Buffalo, NY 14207
Jan 20, 2011 Used for controlling process temperatures up to 350°F, HTF 350 Series includes heating only, cooling only, and combined heating/cooling configurations with 5 and 10 gpm flow rates. Footprint and design are suited for process applications where space is limited and continuous temperature control is required. Along with gear pump, standard features include insulated heater manifold, microprocessor-based controller, and NEMA-rated electrical enclosure with safety door disconnect switch.

DEK    Rolling Meadows, IL 60006
Jan 19, 2011 Incorporating six-sigma repeatability and parallel print head processing options that maximize uptime, Eclipse photovoltaic (PV) metallization platform offers integrated vision inspection and master controls. Retrofittable modules enable manufacturers to scale production to 1,200, 2,400, or 3,600 wafers per hour (wph). Performance can be upgraded in field; spacer process modules can be deployed at initial installation then exchanged for additional print capacity.

Molecular Imprints, Inc.    Austin, TX 78758-3605
Jan 17, 2011 Perfecta(TM) MR5000 Jet and Flash(TM) Imprint Lithography imprint mask replication platform enables multiple identical replica masks to be fabricated from one e-beam master. Taking e-beam written leading-edge 6025 master masks, nanopatterning system transfers patterns flawlessly onto 6025 replicas that can be accepted by manufacturing wafer imprint lithography system. System dispenses picoliter resist droplets mapped to local feature density, optimizing residual layer thickness uniformity.

Kornit Digital Ltd.    Moshav Magshimim   Israel
Jan 10, 2011 Equipped with 12 print heads, Avalanche 951 Direct-To-Garment Printer generates 4-color process prints at optimum speeds and uses V323 ink series, which is formaldehyde-free. Dual-pallet system features printing area up to 23.5 x 35 in., making it suited for XXL garments and cut pieces. PreT automatic pre-treatment system eliminates need for secondary operation or outsourcing.

Syneo    West Palm Beach, FL 33404
Dec 29, 2010 Automated Leak-Test Pad-Print System (ALPS) combines feeding, handling, and integration technology with Deco-Tech pad printer and Zaxis leak test technology to realize bin-to-bin automation for catheter leak testing and pad printing. Design and automation functionality can help increase daily output for leak test and pad print systems, while simultaneously promoting quality and test integrity as well as reduced labor requirements.

Epson America, Inc.    Torrance, CA 90509
Dec 20, 2010 Designed for label converters, large-scale product manufacturers, and commercial printers, SurePress(TM) L-4033A short-run press fits into existing digital workflows and prints on range of off-the-shelf substrates without requiring any pre-coating. It leverages MicroPiezo® ink jet technology and SurePress AQ 6-color, industrial-quality, water-based pigment ink. Operating at speeds to 16 fpm, press offers variable web width to accommodate rolls 3.15-13 in. wide and up to 0.013 in. thick.

DEK    Rolling Meadows, IL 60006
Dec 07, 2010 Facilitating printing on different levels with upward or downward steps, VectorGuard 3D enables uniform stencil thickness to be achieved for quality print results. Electroformed nickel stencil not only prints 2 levels simultaneously, but can also accommodate levels that differ by up to 3 mm. In addition to providing coverage for dedicated areas on board, VectorGuard 3D is suitable for printing of heatsink pockets for power components or printing of 3D mounting PCBs.

K-Sun    Somerset, WI 54025
Dec 01, 2010 Suited for those who need to design and print pressure-sensitive labels on-demand and in-house, Green Machine® label, heat-shrink tube, and bar-code thermal-transfer printer incorporates hot key support and PEELGUARD® electronic tape trimmer. Printer works with MaxiLabel® Pro v3.0, which lets users create ANSI safety, industrial, and general symbols as well as import custom images. Add-on symbols libraries cover Laboratory/Medical, Electrical, and Homeland Security industries.

Trans Tech America, Inc., An ITW Decorating Co.    Carol Stream, IL 60188
Nov 24, 2010 Addressing concerns over pad printing setup, ExpressPad(TM) lets users replace pads with no tools. Functionality reduces replacement time while promoting precision and repeatability of pad placement. Suited for short and long run production jobs, product is available in 60, 90, and 130 mm configurations. Testing found that average users could save 5 min per setup, resulting in time savings of 40 hr/year.

Creative Materials Inc.    Ayer, MA 01432
Nov 23, 2010 Available as 2-component system, 125-26A/B119-44 adheres to variety of substrates, including ITO-coated surfaces and other low surface-energy substrates. Electrically conductive product is resistant to scratching and creasing and is capable of screen printing circuits with fine-line widths and spaces as small as 50-75 microns. With minimal sensitivity to handling, abrasion, and solvents, RoHS-compliant ink is suited for touch screens, solar cell circuits, and RFID applications.

DEK    Rolling Meadows, IL 60006
Nov 17, 2010 Forming chemical bond with stencil surface, DEK Nano-ProTek minimizes ability of flux to stick to aperture and bottom side of stencil, enabling stainless steel or nickel stencils to be easily cleaned for optimal results. Wipe optimizes both capacity of understencil cleaner and gasketing of stencil to PCB. It can be applied to new and existing stencils at room temperature and may be re-applied as required.

Pad Print Machinery of Vermont    East Dorset, VT 05253
Nov 17, 2010 Optimizing operator access and visibility to support table, KP Series pad printers feature sealed cup that remains stationary while cliché mounted to support moves forward and back. Pad is in back position when cycle starts, allowing operator to work unobstructed while loading and unloading parts.

Mark Andy    Chesterfield, MO 63006
Nov 16, 2010 Capable of running jobs as short as 800 ft or 250 m as well as any longer run demands, film-capable Performance Series P5 minimizes tools and operator steps while maintaining consistency, quality, and repeatability. Operators can set-up and changeover 4 different print jobs within 6 min. Characteristics include available printing widths of 10, 13, or 17 in., substrate range of 25-350 microns, and print repeat range of 5.5-24 in.

EV Group Inc.    Tempe, AZ 85284
Oct 15, 2010 Based on UV-NIL systems, Soft Molecular Scale Nanoimprint Lithography (SMS-NIL) technology enables ultra-high-resolution patterning of features down to 12.5 nm on large-area surfaces. Soft working stamp process allows full-area nanoimprints and optically aligned UV-NIL on existing EVG equipment. While stamp and imprinting can be processed on same tool without additional processing steps, soft polymeric working stamp's properties reduce mechanical damage to master templates.

FOX IV Technologies, Inc.    Export, PA 15632
Oct 13, 2010 Utilizing 2 opposing Zebra Zi4(TM) print engines, TwinPrint Tabletop Printer produces shipping label information and packing slip information on single label. System features serial and Ethernet communication ports, embedded fonts and languages, silk-screened media paths, and fan-fold label docking station with capacity for more than 1,100 6 x 8 in. labels. Media is available in Direct-Thermal over Thermal-Transfer stock or with 2-sided Direct-Thermal coating.

Westix, Inc.    Escondido, CA 92029
Oct 12, 2010 Operating on 110 or 220 V electricity, Lightning Label Automatic Screen Printing Press can produce 800 pieces per hour with peak output of 1,200-1,400 pieces per hour. Unit does not require air compressor or conveyor dryer, and will completely cure label prints with 3 high-density halogen/infrared flash cure units. Press is completely computer controlled and all aspects of print heads and flash units are controllable from main control unit.

Epson America, Inc.    Torrance, CA 90509
Oct 07, 2010 Based on Epson Stylus® Pro 7900 printer with 24 in. wide format, Epson Stylus Pro 7900CTP includes plate curing device, EFI® Computer-to-Plate RIP software package, and plate guide attachment. DirectPlate Aluminum technology enables true aluminum lithographic printing press plates to be created using Epson UltraChrome® HDR inks, and each plate can be used to produce up to 20,000 impressions. Water-based system eliminates handling of hazardous chemicals and delivers up to 175 lpi resolution.

Screen USA    Rolling Meadows, IL 60008
Oct 07, 2010 Operating at 721.7 fpm max, Truepress Jet520ZZ produces direct mail, books, magazines, and other high-volume work that traditionally has been printed offset. Continuous-feed, single-pass system incorporates drop-on-demand inkjet technology, color management, screening algorithms, and stable paper transport system. Featuring max imaging resolution of 720 x 720 dpi, system handles rolls of inkjet paper, standard paper, uncoated paper, and matte/gloss coated stock up to 22.4 in. wide.

Ricoh Corp.    West Caldwell, NJ 07006
Oct 07, 2010 Designed for graphic communication market, RICOH® Pro C901/C901s Graphic Arts Edition is optimized for print quality, reliability, and substrate handling capabilities. It prints at speeds to 90 ppm and offers near-offset quality results with PxP(TM) chemical toners and oil-less fusing technology. Image quality consistency is made possible via image stabilization, single direction development, mechanical paper registration, fusing technologies, and automatic calibration.