Birchwood Casey    Eden Prairie, MN 55344 2138
Mar 30, 2012 Near-Zero(TM) Water Recycling System is designed for TRU TEMP process lines up to 150 gal in tank size and is pre-engineered for fast setup. System allows the user to recycle and re-use water in rinse tanks for one month, after which filter media needs to be changed and rinse tanks changed and re-filled with clean water. Whether installed on new process line or added as retrofit, system is useful in installations where normal water and city sewer services are not easily accessed.

Birchwood Casey    Eden Prairie, MN 55344 2138
Dec 22, 2011 Forming protective, non-dimensional black oxide finish on all aluminum surfaces, LUMICLAD® is tightly adherent to metal substrate and is suitable for flat buttons, t-nuts, fluid connections, eye bolts, hex nuts, and handles. System utilizes conventional immersion tank process line and contains no EPA-regulated chemicals. Achieving uniform coating thickness of .00060 in., LUMICLAD will not close down hole diameters or change/clog thread dimensions.

Birchwood Casey    Eden Prairie, MN 55344 2138
Nov 29, 2011 Accommodating manufacturers that require same-day black finishing of small lots, mini BK-LC products enable safe, in-house blackening of parts and achieve durable satin black finish. LUMICLAD® process, which utilizes one heated dip-tank and does not require electrolytic current, forms black oxide coating on aluminum. Process works on all cast and wrought aluminum alloys, forming smooth, black, 1.5 micron thick finish that adheres tightly to aluminum substrate without any rub-off.

Birchwood Casey    Eden Prairie, MN 55344 2138
May 03, 2011 Offering water-based blend of acrylic polymers, CLEARLOK® MAX forms scuff-resistant clear coat finish and barrier against corrosion. Supplied as concentrate, product is pH neutral, non-hazardous, and safe to apply without ventilation. Concentrate is diluted with water and applied to parts by immersion, then dried at 70-130°F, achieving nominal film thickness of .002 in. Applications include hand tools, machine components, power transmission components, pumps, valves, and oilfield equipment.

Semblant, Inc    Chandler, AZ 85286
Apr 18, 2011 With properties optimized for solder through, solderability, corrosion resistance, flux containment, and creep corrosion suppression, Semblant Plasma Finish (SPF) is intended for high-volume production but can be used in prototype and low-volume production as well. This truly disruptive nano-coating, which does not generate any hazardous waste or consume any water, contains no carcinogens and is safe in process as well as final material.

Birchwood Casey    Eden Prairie, MN 55344 2138
Mar 01, 2011 Utilizing Ion Exchange technology to remove all particulates and dissolved ions from rinse waters, LUMICLAD® features Zero-Discharge configuration that totally eliminates need for drain connection. System produces 1.5 micron thick satin black finish with smooth, clean surface that is electrically conductive and tightly adherent to aluminum substrate. Finish can be applied to all aluminum alloys, with no reduction in hole diameters or change in critical dimensions.

Birchwood Casey    Eden Prairie, MN 55344 2138
Oct 25, 2010 Utilizing immersion tank process line, LUMICLAD forms non-dimensional black oxide finish on aluminum surfaces that is electrically conductive and adherent to metal substrate. Inherent lubricity aids in break-in and resists galling. Suited for piston/cylinder assemblies, actuators, and slides, 30-min process develops uniform coating thickness of .000060 in. that will not close hole diameters or alter critical part dimensions. Slightly porous crystal structure also absorbs optional topcoat.

Birchwood Casey    Eden Prairie, MN 55344 2138
Sep 15, 2010 Designed for aluminum components, LUMICLAD® develops coating thickness of .000060 in. with smooth, clean surface that is electrically conductive. Satin black finish has uniform thickness that will not close down hole diameters or change critical part dimensions. Inherent lubricity makes LUMICLAD suitable for sliding contacts, such as piston/cylinder assemblies. With slightly porous crystal structure, finish absorbs optional topcoat, such as clear polymer, light oil, or dry-to-touch sealant.

Birchwood Casey    Eden Prairie, MN 55344 2138
Aug 06, 2010 PATINA GREEN(TM) forms mixture of different copper compounds on copper, brass, and bronze surfaces that appears similar to natural aging and oxidation of outdoor weathering conditions. For bright green or mint green finishes, it is applied onto clean copper, brass, or bronze surface using brush, dipping, or spray. It can also be applied as secondary treatment over brown or black base coat to create slightly muted tones that are somewhat opaque. Product is available in 1, 5, and 55 gal containers.

Birchwood Casey    Eden Prairie, MN 55344 2138
Jul 07, 2010 Suitable for most metal surfaces, including iron, steel, copper, brass, and bronze, Presto Black® Gel clings to vertical surfaces and stays where applied without forming runs or drips or bleeding onto adjoining surfaces. Product is applied at room temperature and takes 5-10 min for reaction following normal surface cleaning. Color tone and depth is controlled by visual inspection and stopping process by rinsing off with wet sponge and allowing surface to dry.

Sherwin-Williams Co. c/o Ultimate Lead Systems    Berea, OH 44017
Jun 29, 2010 Promoting long-term color and gloss retention in harsh environments, Polysiloxane 1K cures with reaction from atmospheric humidity and provides weathering and chemical resistance. Single-component solution, available in Extra White base that can be tinted, provides protection in recommended range of 1.5-2.5 mils DFT. Application can take place in temperatures as low as 40°F and up to 90% relative humidity. Coat dries to touch within 2 hr at 77°F and can be recoated within 4 hr.

Enviro-Solutions Ltd    Peterborough, ON K9J8N4  Canada
Jun 16, 2010 Easy to clean and maintain, ES 96 high-traffic floor finish provides stain and heel mark resistance. It is also designed to be occasionally burnished using ultra-high-speed burnishing systems. Floor finish dries quickly and requires only 15 min between coats.

Birchwood Casey    Eden Prairie, MN 55344 2138
Jun 11, 2010 Helping tooling designers achieve durable and protective finish, TRU TEMP® has total process time of 25 min and can be safely operated in-house at 200°F. Finish serves as protective barrier against corrosion in storage, shipment, and startup, while crystalline structure provides break-in lubricity and anti-galling protection. Containing no metals or other pollutants, process complies with MIL-DTL-13924, Class 1 and withstands 100-300 hr salt spray.

Enviro-Solutions Ltd    Peterborough, ON K9J8N4  Canada
May 13, 2010 Made of an acrylic polymer blend, ES 82 can resist penetration of more than 30 common stains and soiling agents. Solution is suited for scrubbing and recoating or for spray buffing to help restore floor shine using floor machines with up to 1,000 rpm. Environmentally safe and zinc free finish is UL approved for slip resistance.

Sherwin-Williams    Cleveland, OH 44115
Dec 04, 2009 SHER-WOOD® KEM AQUA® PLUS pigmented color system is resistant to yellowing and provides fast build and hide in range of color options. SHER-WOOD® KEM AQUA® PLUS Surfacer offers optimal filling properties along with hiding and sanding capabilities, and is also available in wide range of base colors. Low-emitting coating systems meet or exceed various environmental regulatory requirements. Products are suited for finishing furniture, kitchen cabinetry, store fixtures, and woodwork.

Birchwood Casey    Eden Prairie, MN 55344 2138
Aug 25, 2009 Suited for manufacturers that require same-day black finishing of small lots of aluminum parts, mini BK-LC series safely blackens parts in-house and achieves satin black finish. LUMICLAD process, which takes ~30 min, utilizes dip-tank procedure to form black oxide coating on aluminum while utilizing only one heated tank and eliminating requirements for electrolytic current. LUMICLAD finish is 1.5 microns thick and will not shrink hole diameters or add measurable thickness.

Enviro-Solutions Ltd    Peterborough, ON K9J8N4  Canada
Apr 24, 2009 UL approved for slip resistance, ES 82 leaves floors with low-luster gloss and resists heel marks as well as staining and soiling from more than 30 common agents. Durable, easy-to-apply product is intended for use in nursing homes, long-term healthcare settings, and hospitals, or anywhere safety is paramount.

Birchwood Casey    Eden Prairie, MN 55344 2138
Apr 20, 2009 Available in integrated programmable hoist and 110 gal tank line to automatically process iron and steel components with high quality black oxide finish, TRU TEMP® finishing system produces 4,000-6,000 lb of finished parts/8 hr shift. System can be programmed to process up to 3 part loads concurrently, for maximum throughput of 5 loads/hr. TRU TEMP finish produces durable satin-black magnetite coating of 0.5 microns in thickness, with no effect on material hardness.

Stahl USA    Peabody, MA 01960
Feb 03, 2009 Hybrid resin RH-6675 is used when cold crack, flex, and print retention properties are required on leather. It features high mechanical stability, allowing for application via roller coat or flow coat machines, and ensuring resistance to print cut-through during high-temperature printing. Aliphatic polyurethane/acrylic dispersion is TEA and formaldehyde free, has low VOCs, and contains no volatile amines. Resulting film is low tack when dry.

AMI Doduco, A Technitrol Co.    Export, PA 15632
Feb 02, 2009 Offered as surface finishing process for bonding gold and aluminum wire to PCBs, DODUBOND can reduce thickness of gold plating to less than 0.1 µm. One gold layer as thin as 50 nm can be enough to obtain firm bond. Based on DODUCHEM chemical nickel/gold surface finishing, process inserts very thin palladium diffusion barrier between nickel and gold to effectively prevent nickel from diffusing onto gold surface. Process reliability is achieved due to stability of palladium bath.