Birchwood Casey    Eden Prairie, MN 55344 2138
May 06, 2013 CLEARLOK® is water-based polyurethane sealant that adds protective topcoat on most metal surfaces, including iron, steel, and aluminum. Non-polluting with no harmful VOC content, polymer sealant produces coating 0.0001–.00003 in. thick. It is rated for corrosion resistance of 12–24 hr of neutral salt spray or over 100 hr of humidity exposure. Available in 5 or 55 gal drums, product can be diluted with water for application using immersion tank process or with brush.

Aqua Based Technologies, a division of ADM Tronics, Inc.    Northvale, NJ 07647
Mar 27, 2013 Compliant with FDA requirements for direct food contact, Aqualene® 5050 is specifically designed for paper and paperboard food packaging and handling applications requiring oil and grease resistance, including wrappers, paper plates, and cups. Repulpable coating dries clear, is VOC-free, and requires only 2.0 g/m² to obtain OGR results. Supplied in pails, drums, and totes, Aqualene® 5050 can be applied by conventional coating apparatus, such as gravure, flexo, or rod.

Michelman Inc.    Cincinnati, OH 45236
May 18, 2012 Typically used for outdoor wood deck and fence applications, Michem Wood Coating 75 penetrates wood surfaces and produces optimal water beading and anti-swell properties. Water-based additive dries completely clear, contains less than 100 g/L of VOCs, and can be diluted down to 10% solids while maintaining effectiveness. Because it protects against water damage, product helps control cracking, splintering, color fading, dirt pickup, and mold/mildew growth.

Aremco Products, Inc.    Valley Cottage, NY 10989
Apr 12, 2012 Consisting of single-part, odorless, water-dispersible formula, Pyro-Paint(TM) 634-BN protects metal and refractory surfaces from corrosion by molten glass, metals, plastics, and salts in applications to 1,560°F. Non-wetting, VOC-free product is formulated with solids content of 38.6% by weight, resulting in dry film greater than 95% boron nitride with coverage rate of 345 ft²/gal, assuming 1 mil thickness. Coating dries at room temperature in 1-2 hr and cures fully in 1-2 hr at 200°F.

McLube Div., McGee Industries, Inc.    Aston, PA 19014
Jan 19, 2012 Intended for rubber and plastic parts, water-based MAC-1023 dries to clear, colorless film with optimum slip properties and minimal coefficient of friction. Coating is chemically and thermally stable as well as environmentally and worker friendly. In addition to rubber and plastic, product is also suitable for use on composite, sponge, and all types of metal. Applications include automotive assembly, O-rings, seals, bushings, hoses, and grommets.

Aremco Products, Inc.    Valley Cottage, NY 10989
Dec 09, 2011 Consisting of single part, water-based, inorganic-ceramic coating system, Cerama-Dip(TM) 538N electrically isolates high-power ceramic resistors for applications up to 2,600°F. Odorless, VOC-free formula features volume resistivity of 109 W-cm and dielectric strength of 225 V/mil at room temperature. Applied by dipping or brushing, Cerama-Dip 538N cures by air-drying at room temperature for 1-2 hr, then step curing for 1-2 hr at 200°F and 350°F, respectively.

Aremco Products, Inc.    Valley Cottage, NY 10989
Dec 06, 2011 Based on titanium diboride, Graphi-Coat(TM) 623 inhibits oxidation of most commercial grades of graphite to 2,000°F. Two-part, water-based, non-volatile material is applied using brush, roller, dip- or spray-processing. Typically air set for 1-2 hr at ambient temperature then cured in-situ or in 10-15 min at 1,300°F, coating protects graphite crucibles and fixtures used in metallurgical casting processes as well as graphite electrodes used in arc-melting furnaces.

Michelman Inc.    Cincinnati, OH 45236
Oct 06, 2011 FDA-compliant Michem Coat 40Y provides barrier coating for paper and corrugated. Combination of raw materials and proprietary formulation techniques are used to produce coating that is resistant to water, oil, and grease and has optimized release properties. Completely repulpable and recyclable, this hot melt and coldset gluable product maintains stability and can be applied smoothly on rod, blade, or roll coaters either inline or offline.

Michelman Inc.    Cincinnati, OH 45236
Oct 04, 2011 Using advanced raw materials, Michem Coat 40Y is water, oil, and grease resistant with optimized release properties. Product is also hot melt and coldset gluable, and completely repulpable and recyclable. Compliant with FDA standards, Michem Coat 40Y is suited for food contact with items such as produce and other perishables, as well as general industrial and retail applications. Product can be applied smoothly on rod, blade, or roll coaters, either inline or offline.

Sherwin-Williams Co. c/o Ultimate Lead Systems    Berea, OH 44017
Aug 31, 2011 Offered as 2-component solution, 3425E Static Control Water-Based Epoxy Coating may be used as coating or topcoat over standard flooring systems to provide static dissipative flooring system in range of 106-109 ohms resistance. It provides resistance to wear, abrasion, and chemical attack from common alkalis and acids and can also be used as conductive coating in range of 25,000-106 ohms resistance when applied over 3424 Conductive Water-Based Epoxy Primer.

Aremco Products, Inc.    Valley Cottage, NY 10989
Nov 24, 2010 Designed for applications up to 1,500°F, Quartz-Coat(TM) 845-Green helps minimize glare in halogen lamps used in automotive, dental, aircraft, stadium, and fire safety industries. Green-pigmented formulation consists of single-part, water-based, odorless inorganic system that absorbs and evenly diffuses light. Product features viscosity range of 500-1,000 cP and solids content by volume of 60.0%. Applied by dipping or pneumatic spray equipment, coating cures in 5 min at 900-1,000°F.

Carboline Co.    St. Louis, MO 63144
Oct 14, 2010 Suited for galvanized steel and other non-ferrous metals, water-based Galoseal WB creates tenacious bond, which optimizes topcoat adhesion to galvanized metal surfaces. Low VOC formula accepts 2-component solvent-containing finishes such as epoxies and urethanes. Product contains no heavy metals or mineral acids and provides dry film thickness of 0.5-1.0 mils.

Linetec    Wausau, WI 54402
Aug 12, 2010 Using water-based TRINAR® Aqua air dry system, Linetec provides on-site repair and restoration of architectural aluminum products' finishes. Application of fluoropolymer finish meets weathering requirements of AAMA 2605, resisting humidity, color change, chalk, gloss loss, and natural weathering. Coating also meets interior specifications for Green Seal® Standard and U.S. Green Building Council's LEED® Green Building Rating System(TM), offering low VOC content.

Aremco Products, Inc.    Valley Cottage, NY 10989
Jun 08, 2010 Formulated for refractory and metal surfaces, jet-black, water-dispersed, HiE-Coat (TM)840-CM demonstrates emissivity greater than 0.90 at temperatures to 2,500°F. Coating is applied using sponge brush, roller, or conventional spray equipment, and offers coverage rate of 250 sq ft/gal with 2 mil dry film thickness. Curing is accomplished in operation or by heating for 1-2 hr at 200°F plus 1 hr at 500°F. Eco-friendly coating has no odor, cleans up with water, and contains no VOCs.

McLube Div., McGee Industries, Inc.    Aston, PA 19014
Apr 23, 2010 Applied to rubber compounds/parts, MAC-863 concentrated mixture of polymeric material provides thin, colorless film coating that can be used on black and colored stock. It will not contaminate rubber stock, ensuring optimal part appearance. No heavy metals, powders, or silicone oils are contained in VOC-free product. Compound can be used in Barwell type operations, pellets, slugs, and extrusions.

Aqua Based Technologies, a division of ADM Tronics, Inc.    Northvale, NJ 07647
Feb 09, 2010 Formulated from FDA approved ingredients for direct food contact, high OGR (oil and grease resistant) Aqualene® 5001 contains zero VOCs and is designed for paper converting and packaging industry. Water-based coating is repulpable, biodegradable, and environmentally safe. Product can be used for coating microwave popcorn bags, food wrappers, paper cups, ice cream boxes, or any food packaging product which requires high OGR properties.

Aremco Products, Inc.    Valley Cottage, NY 10989
Jan 12, 2010 Single part, water-dispersible, phosphate-bonded, and alumina-filled system, Pyro-Paint(TM) 634-ALP ceramic-based sealant is used to fill micro-porosity in dense refractory brick used in high temperature kilns and furnaces. Coating is inert, chemically resistant, inorganic, and does not outgas or decompose in corrosive applications to 3,200ºF. Available in pint, quart, gallon, and 5 gal drums, coating can be applied by brush, dip, or pneumatic sprayers, and cures fully in 1-2 hr at 700°F.

Advanced Polymer, Inc.    Carlstadt, NJ 07072
Aug 28, 2009 Formulated as water-based hybrid resin system, API-278 Stain Blocking Polish(TM) provides deep-penetrating, high-gloss, stain-resistant finish for new densified concrete surfaces. It can be used as primary coating or as protective layer under traditional concrete polish systems. Surfaces coated with API-278, which forms non-sacrificial surface that can be buffed/burnished to high gloss, will exhibit resistance to wear, moisture, and staining.

McLube Div., McGee Industries, Inc.    Aston, PA 19014
Jun 23, 2009 Water based antistick coating, MAC-863, is used for processing tires, rubber hose, belts, extruded profiles, and rubber parts. MAC-863 is operator and environment friendly, chemically and thermally stable, and can be used with cured and uncured rubber compounds. Clear, colorless, dry film coating will not contaminate rubber compound or interfere with post curing processes. Product contains no silicone oil, powder, waxes, heavy metals, or othr hazardous materials.

Dow Corning Corp.    Midland, MI 48686 0994
Apr 03, 2009 Dow Corning® 6706W and 6707W are water-based fluorosilane post-treatments that provide environmentally sound water and oil repellency to porous construction materials like concrete, natural stone, pavers, mortar, and grout, without affecting their appearance. Small molecular size allows them to penetrate easily into material surface, where they chemically bond to most construction substrates. Hydrophobic protection reduces water absorption, and products are UV-stable and solvent-free.