Rhino Linings Corporation    San Diego, CA 92121
May 14, 2013 Combining durability of elastomer with color and gloss stability of UV top coat, SolarMax 11-70 will protect steel, concrete, geotextiles, foam, wood, or aged FRP. Polyurea/polyaspartic chemistry allows coating to be sprayed in hot and dry climates as well as high humidity climates without foaming or blistering. With single coat, multi-pass application, zero VOC coating cures to touch within 30 sec. Cured film provides 70 shore D hardness, 20% elongation, and 3,400 psi tensile strength.

TENNANT    Minneapolis, MN 55426
May 31, 2012 Made using 95% plant-based BiOH® polyol, Eco-ITS(TM) bio-based urethane floor coverings are designed to protect floors in manufacturing, industrial, and warehousing facilities. Sustainable coating application improves productivity and minimizes shutdowns. Available in clear or various colors with gloss or satin finish, product offers 21 g/L VOCs (clear) and 23-46 g/L VOCs (color) and qualifies for multiple LEED® credits.

DSM Functional Coatings    Urmond 6129 EL  Netherlands
Apr 16, 2012 Available in multiple colors and several grades with varying textures and thicknesses, URelle(TM)-Crete protects concrete against mechanical abuse and heavy traffic, as well as extreme conditions such as thermal shock associated with hot water discharge. Three-component urethane cement system, offering resistance to wide range of cleaning and processing chemicals, is suited for pharmaceutical and food/beverage applications.

Bayer MaterialScience LLC - Polyurethanes    Pittsburgh, PA 15205
Apr 04, 2012 Offering alternative to ceramic coatings, one-component (1K) thermal-cure polyurethane coating addresses requirements of glass decorators, including ability to decorate and label over cured Bayer coating, scratch resistance, and full color palette. Coating does not utilize heavy metals, such as cadmium, and formulation contains 2 waterborne polyurethane dispersions (PUDs), and Bayhydur® blocked polyisocyanate.

DSM Functional Coatings    Urmond 6129 EL  Netherlands
Feb 15, 2012 Designed to withstand excessive physical impact, thermal shock, and chemical exposure, URelle(TM)-Crete is suited for pharmaceutical and food/beverage facilities. Three-component urethane cement system protects concrete against mechanical abuse and heavy traffic. Available in multiple colors and several grades with varying textures and thicknesses, URelle(TM)-Crete meets USDA/FDA standards, and is suitable for exposure to wet processing and steam cleaning.

West Development Group    LaGrange, OH 44050
Jun 22, 2011 Used to protect spray polyurethane foam roofing systems, one-component StrataCoat 1220 is moisture-cured, aromatic, and fire retardant. As base coat, product provides tensile strength for hail resistance and protection against foot traffic. Low permeability enables coating to resist moisture vapor over cold storage facilities. Available in 5 and 55 gallon containers, Stratacoat 1220 comes in dark gray and light gray.

Sherwin-Williams    Cleveland, OH 44115
May 19, 2011 Designed to prevent yellowing and gloss reduction from UV light, EnviroLastic AL offers elastomeric performance by bridging gaps up to 1/8 in. Combination of weatherability, crack bridging capability, and adhesion properties make USDA-approved, seamless coating system suitable for interior/exterior walls and ceilings as well as exterior tanks and silos. Applied at thicknesses of 30-250 mils, low-odor, zero-VOC, 100% solids coating offers 3 min tack-free time and 24 hr full cure.

Rhino Linings USA    San Diego, CA 92121
Dec 09, 2010 Rhino(TM) Eco-Coat(TM) helps to reflect sunlight off roof and to improve energy efficiency of building. Aromatic, zero VOC, spray-applied coating for commercial and industrial roofs contains UV stabilizers and leafing aluminum pigment for UV stability. High tensile strength and abrasion resistance enables 2-component product to resist hail, mechanical impact, and pest infestations. It can be used as top coat over Rhino(TM) SPF or as coating for primed metal or concrete roofs.

Northstar Polymers    Minneapolis, MN 55406
Jul 14, 2010 Designed to prolong life of equipment used in bulk material handling operations, such as aggregate handling, mining, and concrete handling, Rhino Hyde Spray 8500AR is spray-applied to virtually any thickness and creates seamless membrane that eliminates corrosion. Product is applied with 2-component high-pressure impingement mixing spray machine and is suitable for screen deck grids, slurry tanks, weigh hoppers, and chute liners.

Line-X Protective Coatings    Brighton, MI 48116
Jun 23, 2010 Able to cure in all weather and temperature applications, ASPART-X(TM) Coatings provide UV protection that does not yellow or fade. This zero VOC, 100% solid, aliphatic, pure polyurea coating is resistant to impact, abrasion, and chemical damage and can be configured in various non-skid finishes. Engineered as topcoat for polyurea and polyurethane systems, proiduct can also be used as stand-alone coating over properly prepared substrates.

Sherwin-Williams    Cleveland, OH 44115
Jan 14, 2010 With low temperature cure at 20ºF and application in conditions up to 85% relative humidity, Cor-Cote HB Urethane provides 4 hr return to service and can be applied on concrete, as well as steel substrates. Reinforced with micaceous iron oxide, it delivers high abrasion resistance, film integrity, and edge retention qualities. Product is suited for municipal and industrial wastewater treatment facilities, including clarifiers, settling tanks, wet wells, and grit chambers.

Sherwin-Williams    Cleveland, OH 44115
Sep 30, 2009 Fast drying Envirolastic® LT Primer is low-viscosity primer that can be applied in temperatures as low as 0ºF. At 77ºF, surfaces can be recoated after 1 hr, and at 40ºF, surfaces can be recoated after 5 hr. Suited for use with polyurea and polyurethane topcoats, primer offers long pot life for brush/roll applications and minimizes likelihood of irregularities in coating film caused by outgassing from concrete substrate. It can be applied via airless spray.

Bayer MaterialScience, LLC - Coatings, Adhesives & Sealants    Pittsburgh, PA 15205
Jun 18, 2009 Suited for use in medical devices, hydrophilic coatings are intended to combine lubricity and hemocompatibility with mechanical properties of polyurethane. Formulation exhibits minimal swelling and is optimized for strength/durability. Aqueous polyurethane dispersions are of solvent-free nature with low viscosity, while solvent-borne polyurethane solutions are characterized by stability and wet strength.

PPG TrueFinish (R) Industrial Coatings    Pittsburgh, PA 15272
Mar 23, 2009 Spectracron 320 2-component, high-solids enamel can be sprayed as low-gloss smooth coat or textured/spattered to provide custom finish that hides various surface imperfections. It contains no hazardous air pollutants and less than or equal to 2.8 lb/gal VOC output when applied. Enamel also features optimized mar, abrasion, and chemical resistance as well as hardness and flexibility.

Bayer MaterialScience LLC - Polyurethanes    Pittsburgh, PA 15205
Feb 20, 2009 Offering environmentally friendly alternative to solvent-based polyurethane coatings, 2-component waterborne polyurethane coatings formulated with Bayhydur® and Bayhydrol® UV resins contain ultra-low VOCs and are suited for both indoor and outdoor applications. Products are also odorless, UV light stable for resistance to weathering, non-yellowing, hot-tire resistant, and chemical resistant.

Sherwin-Williams    Cleveland, OH 44115
Aug 05, 2008 Suited for interior/exterior use in industrial, marine, and commercial applications, Polylon HP Polyurethane provides high gloss and color retention as well as resistance to chemicals, abrasion, and impact. High-solids solution, with VOC level under 250 g/L, comes in range of colors as 2-component polyester-aliphatic urethane coating. It is also resistant to splashes, spillage, and fumes from dilute acids, alkalis, solvents, and fuels.

Sherwin-Williams    Cleveland, OH 44115
Aug 05, 2008 Featuring Ozone Transport Commission (OTC)-compliant and Hazardous Air Pollutant (HAPS)-free formulation, Waterbased Acrolon 100 retains appearances over range of chemical, weather, and mechanical conditions. It is environmentally friendly, has VOC level under 100 g/L, and promotes color and gloss retention. Along with various marine and industrial applications, areas of use can include USDA-inspected facilities.

Excalibur Paint & Coatings    Wichita Falls, TX 76307
Jul 16, 2008 Meeting performance properties of solvent-borne systems without associated health and safety hazards, Aqua - Thane 2K water-borne coating exhibits abrasion, solvent, and chemical resistance including Skydrol, and maintains hardness. Film build of 4-8 mil wet is achieved without foaming, gassing, or flow problems. HAPS free system offers adhesion to steel, aluminum, galvanized metals (both electroplated and hot-dipped), and various stainless steel, PVC, and carbon/fiberglass composites.

Bayer MaterialScience, LLC - Coatings, Adhesives & Sealants    Pittsburgh, PA 15205
May 22, 2008 Polyurethane raw materials can be used to formulate self-healing coatings that are scratch- and chemical-resistant, fast-curing, and meet VOC regulations, such as high solids and waterborne coatings. Offering high reactivity and full crosslinking even at low-temperature curing, 2-component polyurethane coatings include hydrogen bonds that allow for thermoplastic flow to relieve stress and allow self-healing of defects.

Enviroline Group (IECC)    Pompano Beach, FL 33069
May 13, 2008 Two-component, high-gloss Envirothane® 550 is suited for industrial and commercial applications requiring color retention as well as UV, chemical, abrasion, and moisture resistance. Product is available in 22 standard colors, including 5 safety colors.