Optics & Photonics ->
Optical Systems Test & Measuring Equipment ->
Testing DWDM Components|
Testing DWDM Components
(Showing headlines 1 - 20) more ....
DWDM Universal Starter Kit supports 10G and 100G clients.
Redmond, WA 98052
Apr 05, 2012
Featuring 1RU form factor, 100G DWDM Universal Starter Kit will boost optical channel rates to 100G per lambda. Design supports 10G and 100G on client side; 100G optical transport systems are designed to deploy as requirement for higher bandwidth applications and to aggregate internal service elements within carrier networks. For WAN and backbone regional networks, spectral efficiency is important in system engineering design.
Mux/Demux Chipset supports long haul optical transport.
San Jose, CA 95110
Dec 27, 2011
Comprised of BCM8414 demultiplexer for receiving data and BCM84142 multiplexer for transmission, 40G PHY Chipset leverages CMOS technology for 40G optical transmission using DQPSK modulation. Product integrates more than 20 Gbps IOs, which promotes developing devices that will support 100G optical transmission. Chipset's 2 x 23 Gbps to SFI-5.1 demux provides 2 receivers for data recovery on I and Q channels, while fully integrated multiplexer and precoder accept SFI-5.1 data.
OTN Muxponder enables development of any service-any port line cards.
Fremont, CA 94538
Jul 25, 2011
Designed to help future-proof networks, Model MXP2(TM) ASSP is targeted at ROADM/DWDM and Edge Aggregation platforms in OTN transport applications. Device enables development of any service-any port line cards and consolidation of service specific muxponders into single universal design. Eight watt, 2 x 10G single chip solution includes G.709 features such as ODU0, ODUflex, and GMP, enabling services to be mapped to size appropriate OTN containers and multiplexed in single multiplexing stage.
Multichannel CWDM is optimized for stability, repeatability.
GAO FiberOptics Inc.
Nov 24, 2010
Eight-channel Coarse Wavelength Division Multiplexer features epoxy-free optical path, 20 nm channel spacing, and 300 mW power handling capabilities. Operating wavelength is 1,260-1,620 nm, with ±0.5 nm center wavelength accuracy. In addition to line monitoring, WDM networks, and CATV networks, intended applications include power distribution, FTTX, test equipment, and telecommunication systems. Capabilities specifically suit Metro Access and Metro Core/Regional network environments.
CWDM utilizes thin film coating technology.
GAO Tek Inc.
Toronto M1B2K4 Canada
Jun 25, 2010
Operating over wavelength of 1,510-1,610 nm with 20 nm channel spacing, Coarse Wavelength Division Multiplexer maximizes existing fiber optic infrastructure by transmitting multiple wavelength signals through same fiber optic cable. Unit enables dual fiber strand to support multiple network topologies and data rates. Encapsulated within non-flux metal bonding micro optic packaging, CWDM has epoxy-free optical path and offers stable performance in demanding environments.
MEMS Optical Channel Monitor suits DWDM network testing.
Dicon Fiberoptics Inc.
Richmond, CA 94804
May 24, 2010
Suited for either 50 or 100 GHz channel plans, Optical Channel Monitor (OCM) scans DWDM networks and reports power of each channel in real time. Voltage controlled unit supports standard 88 channels with options to cover 96, and can scan continuously with speed of 250 msec or hold particular park state position. Customizable wavelength range covers C and L band applications and any combination of 10 and 40 Gbit optical channels. Device measures 70 x 106 x 10.8 mm.
Muxponder maximizes bandwidth on existing infrastructure.
Milpitas, CA 95035
Jan 21, 2009
Part of OpVista CX8 Optical Networking System, CX-40G Muxponder delivers 40 Gbps transmission/wavelength across optical networks from metro to long-haul. It is based on Dense Multi-Carrier (DMC) technology and combines 4 x 10 Gbs service streams into single 50 GHz Dense Wavelength Division Multiplexing (DWDM) channel. System helps deliver multiple 10-Gbit/sec services and also eliminates issues of PMD and CD optical dispersion.
Flexible Remote Node unifies access and backhaul networks.
ADVA Optical Networking
Ramsey, NJ 07446
Oct 09, 2008
Integrated into ADVA FSP 3000 WDM System, Flexible Remote Node enables communications providers to serve customers from unified access and backhaul network. When located at curb, FRN can be configured as passive network element with environmentally hardened WDM filters that allow point-to-multipoint WDM-PON structure. When located at street cabinet, FRN can include active equipment such as optical amplifiers and active Ethernet technology that enable reach extension and traffic aggregation.
DWDM SFP Module features 5 Gbps transmission speed.
San Jose, CA 95134
Sep 25, 2008
Enabling expansion of SFP-based board design performance, transceiver can deliver output power from +3 to +6 dBm, has channel spacing of 100 GHz, and offers full C and L band coverage. Optical engines consist of Bookham Avalanche Photodiode (APD) Receiver and buried-heterostructure directly modulated laser. Able to achieve uncompensated reach of 400 km at 2.5 Gbps, solution can operate in high-noise, amplified environments and multi-span links for metro networks.
DWDM Network Platform is able to serve from metro to core.
Nokia Siemens Networks
Espoo 02610 Finland
Jul 02, 2008
With multi-service and multi-reach feature set, hiT 7300 supports all reaches and transmission speeds in metro, regional, long-haul, and ultra-long haul applications on single platform. Unit has transponder cards that support traditional SONET/SDH, Ethernet, and SAN services at different speeds. Including amplifier options and end-to-end management support for all equipment configurations, it is also available in flatpack form factor suitable as CPE for tight space requirements.
Muxponder-on-a-Chip targets OTN networks.
Galazar Networks, Inc.
Ontario K2H 1E6 Canada
Jun 20, 2008
Suited for ROADM/DWDM applications, MXP(TM) devices address metro networking applications by combining Next-Gen SONET/SDH functions of MSPP and OTN functions of transponder to act as muxponder-on-a-chip. This helps Service Providers utilize their WDM wavelengths more efficiently by allowing them to multiplex number of revenue-generating services on single wavelength. Muxponder cards based on MXP family can address all service types, including Ethernet, SONET/SDH, SAN, and Video.
CWDM Optics expand existing fiber capacity.
Suwanee,, GA 30024
Apr 16, 2008
With 1 GHz CHP CORWave, MSOs can leverage existing fiber networks for delivery of HD-On-Demand, SDV, and business services. When deployed with ARRIS OptiMax4100 4 x 4 segmentable nodes, CORWave enables multiplexing of 12 wavelengths: 4 forward, 4 return and 4 bidirectional, all on one fiber with link length of up to 25 km. When deployed with ARRIS OptiMax segmentable nodes in 2 x 2 configuration, CORWave enables longer link lengths of up to 30 km.
Wavelength Selective Switch manages network traffic.
San Jose, CA 95131
Feb 22, 2008
Scalable from 1 x 2 to 1 x 9 applications, Mini WSS dynamically supports unpredictable network traffic in metro and access DWDM networks. Switch incorporates all critical functions required for network equipment manufacturers and service providers to remotely add and drop network capacity or change wavelength's path based on demand, without manual intervention or rebalancing of network. Based on MEMS technology, single-slot unit provides colorless switching.
Transceiver Module suits 80 km telecom applications.
Albuquerque, NM 87123
Apr 13, 2007
Intended for long reach, 10 Gbps applications, DWDM Model EDW-9100-XFP consists of transmitter with cooled 1,550 nm EML and high-sensitivity receiver with APD photodetector. Transceiver operates over temperature range of 0-70°C and offers optimum heat dissipation and electromagnetic shielding, enabling high port densities for 10 Gbps systems. Key options include C-Band and L-Band coverage at 100 GHz ITU-grid spacing, as well as private labeling.
SFP Transceivers help connect SANs remotely.
Chatsworth, CA 91311
Dec 14, 2006
Covering distances of 10, 40, 80 km, fibre channel CWDM and DWDM interfaces support multi-rate operation at baud rates of 4.25, 2.125, and 1.062 Gb/s, respectively, and Ethernet rate of 1.25 Gbps. CWDM family is available in 18 wavelengths ranging from 1270-1610 nm, while DWDM family supports 46 channels in C-band, from ITU channel 15 through 61.
LWDM Platform supports all access and metro applications.
Pirelli Broadband Solutions
Oct 24, 2006
Featuring Dense Wavelength Division Multiplexing (DWDM) capability, LWDM platform supports 6 CWDM wavelengths operating at 2.5 Gbit/sec, and 16 DWDM wavelengths operating at 2.5/10 Gbit/sec for total capacity of 175 Gbit/sec on single platform. DWDM channels support optical amplification and allow links up to 200 km without use of dispersion compensation.
DWDM Access Transport Platform offers 1.25 Gbps max speed.
Novera Optics Inc.
SantaClara, CA 95054
Sep 12, 2006
TurboLIGHT(TM)16 dense wavelength division multiplexing (DWDM) fiber-to-the-x (FTTx) optical access transport platform acts as passive optical network (PON) system that delivers 20 Gbps of symmetrical bandwidth over single feeder fiber. Based on Lambda-PON(TM) automatic wavelength-locking technology, product carries 16, 125 Mbps to 1.25 Gbps bidirectional data streams using 32 independent wavelengths. System comes in modular and complete system forms, both with mixed-mode capabilities.
Optical Subassembly is for use in 10GBASE-LX4 transceivers.
Sterling, VA 20166
Apr 03, 2006
Small form factor receive optical sub-assembly, Quad LX4 ROSA multi-filter chip is a 4-channel CWDM optical component consisting of 4 optical filters deposited on single piece of fused silica and used to demultiplex the 10Gbps data into 4 separate 2.5 Gbps channels. Each channel is fitted with its own high-speed photo detector and transimpedance amplifier. Product is designed for use in X2/XPACK transceiver modules.
Wave Division Multiplexers transmit two optical signals.
Communications Specialties, Inc.
Hauppauge, NY 11788
Oct 13, 2004
Fiberlink® 6400 Series Passive Optical WDMs allow 2 separate fiber optic links to operate at different wavelengths over same fiber optic core. Each optical signal may carry multiple baseband video, audio, and data channels. Optical signals are transmitted at 850 and 1,310 nm over multimode fiber or 1,310 and 1,550 nm over single mode fiber. Insertion loss ranges from 0.5-2.0 dB per output. Units are available in card or box versions with ST or FCPC connectors.
Multiplexer/Demultiplexer incorporates 62.5 µm core fiber.
APA Optics Inc.
Minneapolis, MN 55449-7218
Dec 02, 2002 Multimode fiber-based DWDM mux/demux offers 8 channel, 200 GHz spacing. It features uniform channel-to-channel insertion loss and large bandwidth due to broad flat-top passband. Insertion loss is typically less than 1 dB and polarization dependent loss is less than 0.3 dB over -40 to +85°C without any active temperature control. Variation across all channels is less than 0.2 dB. Adjacent channel isolation is typically greater than 30 dB.
(Showing headlines 1 - 20) more ....
Latest Products in the News
Vishay Intertechnology, Inc. - May 21, 2013
Vishay Intertechnology to Showcase Leading MLCCs and Surface-Mount and Wire-Bondable Thin Film Products at IMS 2013
Digital Rapids Corporation - May 21, 2013
Digital Rapids Bringing Award-Winning Media Transformation and Workflow Innovations to ANGA COM and Broadcast Asia
Liberty Pumps - May 20, 2013
Liberty Pumps Ends Production of the Pedestal Sump Pump
Bunting Magnetics Company - May 20, 2013
New Vibratory Feeder Line Introduced by Bunting
Ross, Charles, & Son Co. - May 20, 2013
Ross Hits Sales Milestone in the Battery Industry
Schleuniger, Inc. - May 20, 2013
Hand Crimping Is Obsolete with the Perfect Pair
Fastorq Bolting Systems, Inc. - May 20, 2013
Fastorq Brings 'Tool Revolution' to 0TC 2013!
Spring Technologies Inc. - May 18, 2013
NCSIMUL Player 9: When NC Programming Becomes a Fully Immersive, Collaborative and Mobile Experience
Steelcraft Inc. - May 17, 2013
Welding Considerations When Investing in Duplex Stainless Steel Vessels or Tanks
Steelcraft Inc. - May 17, 2013
Steelcraft to Supply Key Components for Canadian Armed Forces' Fleet of Light Armoured Vehicle III Upgrade Project
More Products in the News...