Constructed of Kynar® (PVDF) engineering thermoplastic, Kynar (PVDF) Connectors (No. 11390–11404) serve applications requiring purity, strength, and resistance to solvents. Configurations include female luer lock to barb, non-vented female luer lock cap, female luer lock to female luer lock, male luer lock to barb, and non-vented male luer lock cap. Natural-colored components are Autoclave, E-Beam, EtO, Gamma, and Steam sterilization compatible, and barbs range in size from 1/16–¼ in. Read More
Targeting drives and motion applications, Anybus CompactCom 40-series enables drives manufacturers to comply with such profile specifications as PROFIdrive, EtherCAT DS402, and transparent DS402 on other networks. Process data latency is lower than 15 µsec, and 1,500 bytes of process data can be transferred in each direction. Accelerating testing and compliance, products are pre-certified for network conformance by all major network organizations. Read More
Featuring stub-less design with screw-mounting to PCB, H2.4 Series meets MIL-STD348B standard, and supports up to 50 GHz with transmission speed of 25 Gbps. Compression-mounted 2.4 mm connector, rated for 500 mating cycles, has contact resistance of 4 mΩ max in center and 2 mΩ max in outer section. Plug is manufactured with 0.085 in. semi-flexible cable and terminated plugs on each end, while receptacle features gold-plated ground ring for stabilizing grounding on PCB. Read More
Allowing mating/unmating of power and signal cables from plug-in side, PS3F Series front access hybrid connector eliminates need for on-site cable wiring. Power contacts support up to 100 A with rated voltage to 1,000 AC/DC, and signal contacts support up to 1 A per contact and interface with 2 Hirose GT8E connectors utilizing one 8- and 10-position connector. Blade contact structure features multiple contact points, and signal lines can be configured in daisy chain. Read More
Used as interposers or integrated into connector housings, Z-Ray™ 0.80 mm pitch, one-piece compression contact arrays offer 28+ Gbps performance. ZA8 Series, available with choice of dual compression contacts or single compression with solder balls, has up to 400 total BeCu micro-formed contacts and features 25 g normal force with .008 in. contact deflection. Available in customizable shapes and patterns, products are optimized for density, X/Y/Z axis flexibility, and cycle life.
Reducing vehicle roof antenna installation time, GT36 Series provides one-step connection of multiple coaxial cables to PCB. Internal solution specifically enables attachment of 4 coaxial lines to automotive antennas, including shark fin antennas, and features rugged positive lock structure that offers lock strength of 98 N. RoHS- and ELV-compliant product has rated voltage of 50 Vac, rated current of 1 A, contact resistance of 50 mΩ max, and insulation resistance of 100 MΩ min at 500 Vdc.
With rugged metal housing, redundant sealing, and latchless design, RPLQ4 Series is intended for rack mounted liquid cooling applications. Non-spill shutoff valves allow hot swappable connections without drips, protecting valuable electronics. Offered with ¼ and 3/8 in. terminations in SAE and NPT configurations, color-coded quick-disconnect couplings are constructed from chrome-plated brass, polysulfone, and stainless steel materials that ensure chemical compatibility. Read More
Supporting mix of any class copper and/or aluminum conductor without concern for expansion, contraction, and galvanic corrosion, NIMBUS® 2X has built-in wire stop feature that lets installer use flex or code conductor on either side without needing to stagger inputs and outputs. This optimizes space by halving dimensional requirements. Screw design promotes vibration resistance, compresses conductor without damage, and eliminates need for ferrules, rendering this part reusable. Read More
While meeting efficiency and no load input power requirements of US Department of Energy (DOE) Level VI standards, SWI12-SC (12 W) and SWI24-SC (24 W) series feature screw terminal connections that accommodate designs requiring flexibility beyond standard 5 ft DC cord. Output options include 12, 15, and 24 Vdc; no-load power consumption is <0.1 W; and universal input range is 90–264 Vac. These single-output US wall power adapters cover both UL 60950 and UL 1310 safety approvals. Read More
Featuring 0.23 x 0.10 in. footprint and profile that minimizes LED light shadowing, horizontal-mating DF59M Series carries current capacity of 6 A at 350 V AC/DC and accommodates 22–28 AWG wire. Horizontal-mating series has snap-in structure that provides positive lock strength of 16N and 2 clear indicators of secure mating: audible click and tactile snap. RoHS-compliant and UL-recognized series also offers 3 points of contact to optimize reliability by stabilizing contact resistance.
Manufactured from copper with silver plating, true Zero ohm high current SMT Jumpers come in 3 resistor chip sizes – 0603 chip size (Cat #5110), 0805 chip size (Cat #5106), and 1206 chip size (Cat #5108) – to simplify designs and footprint template compatibility. These connectivity devices provide low impedance and circuit linkage with footprint identical to zero ohm resistor. Areas of use include high-density, high-current PCB applications. Read More
High Temperature Appliance Inlet and Cord Connectors are rated according to IEC for 16 A at 250 Vac, and 20 A at 250 Vac according to UL/CSA. Series 1681 appliance inlets, offering snap-in or screw-on mounting, can be specified with terminals for solder, quick-connect, or screw connections. Series C22F inlets are available with EMC filter, while cord connectors come in straight Series 1658 and angled Series 1659. Cables with conductor cross-section up to 2.5 mm² or 10 AWG can be used. Read More
MiniMax™ Series, affording flexibility where space and weight restrictions are considerations, includes pin socket version. While 24-pin configuration is available with 4 power and 20 signal contacts, 19-pin configuration features 4 power and 15 signal contacts. Pin socket version is available as standalone connector, able to be mounted on flex or cabled by users, or as complete pre-cabled solution. Within signal contacts, there are 2 contacts for USB power connections as available option. Read More
Featuring blade contact that supports mounting to standard 1U rack, PS3 Series includes slim designs for ESS storage batteries, UPSs, and industrial machinery. Plug-in connector series, available with 2 power contacts and up to 24 signal contacts, includes power only and signal/power hybrid versions. While power contacts support up to 150 A, signal contacts support up to 1 A. Floating mounting screws adjust for misalignment during mating in X and Y directions up to ±2.0 mm. Read More
Guarding against accidental disconnection of PDUs, servers, and most network devices, C-13 and C-19 Connections are suited for data centers as well as medical, military, and maritime applications. Once connector is pushed into standard IEC inlet and locked into position, it cannot be accidentally pulled or vibrated out of inlet. To release and remove, user just slides back red tab. Read More
Made of aluminum alloy with anodized surfaces, ALUX structural system consists of pipes and connectors that allow companies to build, by themselves, such modular solutions as racks, carts, flowracks, and workstations. This corrosion-resistant, 28 mm tubular system is conductive (ESD) and affords adjustability. Read More
With HDMI pass-through connector, standard grounded AC outlet, and openings for 2 keystone snap-in connectors, T3-DV2S Table Box unit lets users power and connect their laptop or any HDMI source to external video display and house sound systems as well as connect with network, phone lines, and other A/V system infrastructure elements. Screw down terminals are provided for cable termination, and options include 1 or 2 button momentary switches/bi-color LED arrangements on cover bezel. Read More
Compatible with Switchcraft® QGPK Series of rack panels and WP wall plates, EH MIDI FEED-THRU consists of 5-pin standard DIN, female-to-female, front mount coupler with fully shielded housing. Product is available in nickel or black flange and mates with field installable Switchcraft® 05GM5M, male 5 pin din connector, or overmolded cable assemblies (MD3/MD6). Use include midi coupler, instrumentation, studio and production facility, communication device, and medical equipment applications. Read More
Used for temporary connection of unterminated cables to 440 Vac, 3-phase power supplies, 49 x 100 x 160 mm Quicktest QT3 has max power rating of 16 A per phase and connects to cables, products, or appliances within seconds. Lid automatically isolates 3-phase supply to increase safety when opened to insert bare cable ends, and circuit is completed when lid closes. Color-coded piano key cable clamps are also marked to prevent confusion, and each phase is protected by individual 16 A fuse. Read More
Supporting LVDS, USB3.0, and HDMI 1.4a Type E, GT32 Series employs pin-in-hole intrusive reflow method that promotes PCB retention force and enables one-time reflow process with other SMT components. Lock strength is 98 N, and operational range is -40 to +105°C. Featuring 1.5 mm pitch, shielded connector offers EMI shielding and low near-end crosstalk (NEXT). Respective transmission speeds for 4-, 10-, and 19-position models are up to 3, 5, and 2 Gbps/pair. Read More