White Hydraulics, Inc.
Hopkinsville, KY 42241 1127
Aug 04, 2008 Intended for medium duty mobile and industrial applications, WP Series hydraulic motors feature flow rates up to 16 gpm, torque to 4,320 lb-in., and pressures up to 2,320 psi at continuous ratings. Units have 3-zone spool valve design, high pressure shaft seal, and check valves. Twelve displacements are available ranging from 1.5-243.7 in³/revolution, along with 10 shaft options, 3 mounting options, and variety of porting options to meet SAE and European requirements.

White Hydraulics, Inc.
Hopkinsville, KY 42241 1127
Sep 21, 2007 WS series is designed with 3-zone commutator valve for optimal flow capacity, heavy-duty tapered roller bearings for handling side loads, and drive link sizable enough to help motors withstand pressure and torque spikes. Along with 9 displacements from 6.1-30.3 in.³/revolution, series is available with 9 shaft options, 7 mounting options, and variety of porting options. Motors are rated for continuous flow rates to 20 gpm, torque to 7,295 lb-in., and pressures to 3,000 psi.

White Hydraulics, Inc.
Hopkinsville, KY 42241 1127
Feb 13, 2007 Offered with various mounting, shaft, and porting options, WR series incorporates 3-zone spool valve, integral check valves, and provision for case drain. Heavy-duty drive links minimize drag while promoting motor efficiency and spline life, and 7 precision rollers eliminate sliding friction. Offered in 12 displacements from 2.5-24.6 in./revolution, series has continuous ratings to 16 gpm for flow, 5,800 lb-in. for torque, and 2,500 psi for pressure.

Microchip Technology, Inc.
Chandler, AZ 85224 6199
Nov 17, 2006 Consisting of 14-pin PIC16F616/610 and 8-pin PIC12F615/609, Flash PIC® microcontrollers feature full-bridge PWM with capture and compare functionality, dead-band control, and emergency shutdown. Devices include comparator for hall-effect sensor interfaces and A/D converter for monitoring functions. Other features include up to 3.5 Kb flash program memory and 128 bytes RAM, as well as internal shunt regulator that allows high-voltage Vdd support from 2 V to user-defined max (HV variants only).

White Hydraulics, Inc.
Hopkinsville, KY 42241 1127
Aug 06, 2004 Suited for construction and agricultural machinery, low-speed/high-torque Model D9 uses dual tapered roller bearings and double-lipped Teflon shaft seals. Eight lobe and 9 pocket Roller Stator® facilitates smooth motor operation, while eliminating need for gearbox in many applications. Available in 9 displacements from 15.6–62.7 in³/rev, motor offers continuous operating speeds from 197–550 rpm and maximum continuous torque capacity of 6,750–20,265 lbf-in.

Sauer-Danfoss
Ames, IA 50010
Jun 29, 2004 L Frame Cartridge mount and K Frame Cartridge and SAE mount motors are offered with 5 pressure/displacement ratings. Full access to the mounting bolt holes is possible, and all main hydraulic connections can be located on one side for easy bundling of hoses. Motors suit medium-duty applications such as skid steer loaders, aerial work platforms, small agricultural sprayers, light- and medium-power construction machines, and road-building machines.

Hagglunds Drives, Inc.
Columbus, OH 43228
Jan 06, 2003 Compact CB motors are shock proof and offer 98% mechanical efficiency. They provide full torque at any speed from standstill to maximum and can stop instantly. Units offer torque up to 210,000 lbf-ft with displacements from 920–3,220 in³ per revolution, speeds to 125 rpm and pressures up to 5,000 psi continuously. Motors are suitable for shredders, feeders, and roll mills.

Nanomotion
Ronkonkoma, NY 11779
Oct 18, 2002 Based on ultrasonic standing waves, HR8EE Piezoelectric motors provide 25% more speed, force, and duty cycle than HR8 motor. HR8EE improves heat dissipation allowing for significant improvement to Envelope of Performance for use with advanced motion control and automation systems. Maximum speed increases to 350 mm/sec; maximum force increases to 45 N.

Smith, A.O., Corp., Electrical Products
Tipp City, OH 45371 1857
Jul 08, 2002 Model C663 is direct replacement for Liebert model B-095D condenser motor, Johnstone part number S89-084, and Emerson part number K63HXEF4-4599. Single shaft motor is suited for 208-230/460 V 60 Hz, 1100 rpm applications at ¾ hp, or 50 Hz applications requiring 190/380 V, 925 rpm replacement motor. Motor includes capacitor and rainshield for protection in rugged weather conditions, and is resilient mounted.

Emerson Specialty Motor Div., Emerson Electric Co.
St. Louis, MO 63136
May 29, 2002 Epact and NEMA Premiumâ„¢ cooling tower duty replacement motors operate in extreme humidity conditions and corrosive environments. Motors have double-sealed bearings, potted leads, bearing caps on 280 Frame and above, heavy gasketed conduit box and cover, sealed lead openings, sealed bracket-to-frame registers, and umbrella-type seal for shaft-up mounting. Motors are available in 2 to 100 hp. They meet NEMA part 31 and help customers meet ASHRAE 90.1 standards.

Applimotion, Inc.
Roseville, CA 95678
May 08, 2002 ULT Direct Drive motors are available in 64, 127, 165, and 190 mm O.D. with through holes up to 75% of OD. Peak torque is 1800 oz-in. Machine-wound stator coils optimize motor constant and keep axial length to minimum. Single-piece, multi-pole magnets are available with custom hubs, allowing simple integration into rotary stage design. Standard windings are available for 12, 24, and 48 V, and custom windings are available at no additional cost.

Maxon Precision Motors, Inc.
Burlingame, CA 94010 1304
May 06, 2002 RE-max 0.94 in. dia motors employ rhombic moving coil design with ironless rotors, which allow for zero cogging. Four versions are available with metal or graphite brushes and single or double shafts. Power ranges vary from 6.5 to 11 W, and continuous torque is rated to 1.7 oz-in. (max). Ambient temperature range is from -22 to 185 deg F, and maximum efficiency is up to 90% depending on the winding.

Nanomotion
Ronkonkoma, NY 11779
Apr 29, 2002 DC Mode of motor operation yields moves of 1 nanometer. Its methodology combines resonant mode with non-resonant mode. Once in position, non-resonant mode can generate moves from 1 to 300 nm for ultra fine positioning. Features include unlimited travel and no intrinsic magnetic field. Ability to drive linear or rotary devices suits this technology to applications in semiconductors, fiber optics, and electronics.

Quicksilver Controls, Inc.
Covina, CA 91722
Apr 24, 2002 SilverMax(TM) combines controller, driver, encoder, and ac brushless motor into single integrated package that can direct drive oversized inertial loads such as flywheels and belt driven slides. It is available in NEMA 17, 23, and 34 sizes, with UL/CE marks in both IP50 and IP65 ratings. PVIA(TM) control provides greater stability and accuracy than traditional PID servo control and achieves 100:1 and higher inertial mismatches.

RAE Corp.
McHenry, IL 60050 7001
Apr 11, 2002 M4000 DC Motor Series is rated at 1/30 to 1/4 hp with speeds to 3,500 rpm. Unit is available in various stack lengths.

Oriental Motor U.S.A. Corp.
Torrance, CA 90505
Mar 30, 2002 Modular, open-framed Nanostep(R) CFKII Series 5-phase microstepping motor and driver is available in high-torque motor frame sizes: 1.1, 1.65, 2.36, and 3.35 in. sq. Holding torques range from 4.6 oz-in. (CFK533AT) to 890 oz-in. (CFK5913HAT), and position accuracy is rated at +/-3 arc-minutes. Unit provides 16 user-selectable resolution settings up to 125,000 steps per revolution. Open-loop driver has mid-frequency resolution suppression circuit.

Baldor Electric Company
Fort Smith, AR 72901
Mar 14, 2002 Severe Duty motors are available in ratings from 1/2 to 500. Constructed of iron, they are built with Class F insulation, Class B temperature rise, and 1.15 service factor. Motors through 575 V use ISR(TM) Inverter Spike Resistant wire. Processing motors provide corrosion resistant epoxy finish, regreasable ball bearings, oversized rotatable cast iron conduit boxes, and stainless steel nameplate. Non-stock motors up to 2000 HP can be ordered.

Danaher Motion MCD
Amherst, NY 14228
Mar 13, 2002 Two-phase, 24-step P110 series miniature step motors are 0.63 in. in diameter and 0.75 in. long with holding torque ratings of 1.0 oz-in. Disc-magnet technology results in rotor inertia of 5.7 x 10E-06 oz-in-sec squared. Phase current in disc-magnet motors may be boosted up to 1.5-times nominal for P110. Construction includes magnetic circuit and samarium-cobalt magnet.

H2W Technologies Inc.
Valencia, CA 91355
Feb 27, 2002 Linear stepper motors travel at speeds to 80 in./sec, with strokes to 144 in. and acceleration to 1G. 2- and 4-phase linear steppers are capable of up to 50 lbs continuous force and 65 lbs peak force. Resolution of 2-phase motors is 1 full step equals .010 in., and 1 microstep equals .00004 in. Resolution of 4-phase motors is 1 full step equals .005 in., and 1 microstep equals .00002 in. Motors include moving Forcer (coil and magnet) assemblies.

Marathon Electric Mfg. Corp.
Wausau, WI 54402 8003
Jan 02, 2002 MicroMAXâ„¢ line of low horsepower ac inverter duty motors are direct replacement for permanent magnet dc (PMDC) systems. Available in l/4 to 3 hp, C face motors have same mounting configuration as PMDC counterparts, including foot print, flange dimensions, shaft length, and diameter. They can be equipped with PWM scalar drive.