NKE AUSTRIA GmbH
Steyr A - 4407  Austria
Oct 09, 2009 Suitable for rope wheels and pulleys, NNF Series is sealed on both sides to prevent dust and splash water from entering bearings. Double row full complement bearings are suitable for low to medium speeds and can take up axial forces and tilting moments in both directions. Lubrication holes in outer and inner ring enable re-lubrication through shaft and housing. For corrosion protection, bearings are available with RoHS-compliant, anti-corrosion coating.

NKE AUSTRIA GmbH
Steyr A - 4407  Austria
Feb 11, 2009 Based on single-row cylindrical roller bearings of RN range, Modular Bearing System features one-piece solid brass cage, which is guided by inner ring, and includes grooves for endoscopic inspection of inner raceways. To conform to individual load and design parameters of specific gearbox, bearings can be assembled in sets of 2, 3, or 4. Each bearing set includes components required to secure bearings axially in planetary gears, such as retaining rings and loose rib rings.

NKE AUSTRIA GmbH
Steyr A - 4407  Austria
Feb 09, 2007 Made from clean bearing steel, Single-Row Cylindrical Roller Bearings are available 164 sizes in design variants NU, NJ, and NUP. Bearing cages are offered in roller-guided and outer ring-guided versions and are made from brass and polyamide. Optimized geometries of raceways and rolling elements maximize loading capacity, while modified cage design facilitates formation of lubricant film. Misalignments can be compensated through modified contact geometry and crowned inner raceways.

SKF USA, Inc.
Kulpsville, PA 19443
Jul 11, 2006 SKF® high-capacity cylindrical roller bearings feature low cross-section cage that eliminates risk of damage by roller-to-roller smearing. Cage design also increases lubrication by allowing room for oil passage, which lubricates contacts between rollers and raceways, provides cooling, and reduces risk of metal-to-metal contact. Optimized cross-sections of rings and rollers minimize potential for fretting corrosion, ring creep, and flange fracture.

FAG Bearings Corp.
Danbury, CT 06813 1933
Feb 20, 2006 Produced with minimal peak roughness values on raceway surfaces to provide optimized stress concentrations, X-Life(TM) bearings feature cylindrical rolling elements that support forces along contact lines and can handle dynamic loads up to 260 kN. Available cage types include pressed steel, profile milled brass cage, one-piece polyamide (plastic), polyamide segmented, machined brass, brass disk separator, and 2-piece brass riveted.

SKF USA, Inc.
Kulpsville, PA 19443
Oct 25, 2005 Dimensionally interchangeable with standard products, SKF® Explorer bearings are manufactured from low-oxygen steel and feature ground transition raceways/shoulders. Modified polyamide/brass cage geometry lends to speed ratings and acceleration, lower heat generation, and reduced vibration and noise, while heat-treating process minimizes dimensional changes. Products come in multiple roller, ball, and thrust bearing configurations.

SKF USA, Inc.
Kulpsville, PA 19443
Aug 23, 2005 SKF® Explorer single-row cylindrical roller bearings feature logarithmically crowned rollers that optimize contact geometry between roller and raceway for operation even under misaligned conditions. Bearing rollers are guided between integral open flanges on one ring, which reduces friction. Available with bore sizes from 0.7874-8.6614 in. in dia, standard units have molded glass fiber-reinforced polyamide cage, or optional machined brass and pressed steel.

FAG Bearings Corp.
Danbury, CT 06813 1933
Aug 09, 2004 X-Lifeâ„¢ products include 4 types of bearings. E1 spherical-roller bearings feature optimized surface finishes and bearing and roller geometries. Angular-contact ball bearings are manufactured with brass, TVP, or pressed steel cages, while SL series cylindrical-roller bearings are available with brass or plastic cages. KUVE and RUE ball and roller monorail guidance systems, suited for dynamic traverse motion and positioning motion, help provide long-term mechanical accuracy.

Barden Corp., The
Danbury, CT 06813
Sep 30, 2002 Cylindrical roller bearings are single and double row spindle bearings with crown profile for optimized load distribution. Typically used in combination with double direction angular contact thrust bearings, they are suited for applications where combination of radial stiffness, high radial capacity and high precision support are required. Hybrid Ceramic (HCN) single row cylindrical roller bearing suits high speed floating bearing arrangement in milling spindle applications.

SKF USA, Inc.
Kulpsville, PA 19443
May 06, 2002 Hybrid bearings, including angular-contact ball bearings and cylindrical roller bearing, combine steel raceways with silicon-nitride balls. Dimensionally interchangeable with ISO dimensioned bearings, hybrid bearings provide resistance to wear. They can operate without oil, using process fluid as lubricant. Silicon nitride balls have 50% higher modulus of elasticity than steel, increasing bearing stiffness.

SKF Motion Technologies
Bethlehem, PA 18017
Mar 06, 2002 SKF® single-row, silicon nitride, cylindrical roller bearings offer ceramic rollers, polymer cages, and tapered bores for preload/clearance adjustment. Bore sizes range from 40 to 120 mm. Design allows bearings to reach reference speed of 1.8 million Ndm when light-loaded and oil-air lubricated. Units are suited for machining and milling applications.