Simrit, A Div. Of Freudenberg-NOK    Plymouth, MI 48170
Dec 07, 2011 Resistant to motor oils with aggressive additives, FKM (80 FKM 233877) survives exposure to coolant and lubricant that reaches temperatures to 180°C in internal combustion engines of industrial drive technologies. O-rings made from this material can be used permanently at temperatures of up to 150°C as well as for short periods at temperatures to 180°C. Material, manufactured entirely without lead, is safe for environment, from compounding and processing to finished product and recycling.

Ensinger, Inc.    Washington, PA 15301
Dec 06, 2011 Available in .062, .093, and .125 in. thicknesses, Penn Fibre' thin gauge TECANYL® PPO sheet is made from Sabic Noryl EN 265 resin and supports continuous use temperatures exceeding 220°F. Another thickness, 0.40 in., is also available, with 50 sheet minimum, and standard sheet size is 24 x 48 in. All sizes exhibit minimal moisture absorption, impact strength, and electrical insulating properties. Chemical degradation from water, salt solutions, acids, and bases is also minimal.

UV III Systems, Inc.    Alburg, VT 05440
Dec 06, 2011 Able to dry coatings at 20-30 fpm along 15-22 in. cure path, UV Floorcure system is customizable to suit end-user requirements and available with assembled cart. Industrial strength product has forced-air cooling system and can be used as hand-held cure unit. Cure path is variable to suit all coatings, and use is facilitated via one-button operation. Suited for clearcoat or opaque, system comes in 120 V version on wheels for portability and also works well for baseboards and lining.

Martin Thomas, Inc.    Barrington, RI 02806
Dec 05, 2011 Manufactured by cast film extrusion, Maxelast® D Series Grade D01-0421 is latex- and phthalate-free, non-toxic and odorless, and compliant with FDA food contact grade standards. Material softens and shapes to user's hands when worn. Weighing 0.09 oz per piece and available in thicknesses of 0.03-0.04 mm, gloves made from Maxelast TPE are suited for food service applications, emergency treatment, lab testing, and electronics manufacturing.

Wacker Chemical Corp.    Chino, CA 91710
Dec 05, 2011 Minimizing mold fouling, ELASTOSIL® LR 3011/50 FR is formulated with inert fillers that work together to produce flame-retardant properties without abrasive additives. Vulcanizates are UL 94 V-0 rated. Addressing 2-component injection molded products, self-adhesive ELASTOSIL® LR 3170/40 also meets V-0 flammability rating of UL 94 standard. It uses self-bonding technology and is formulated such that it begins bonding to hard components but not surface of injection mold during vulcanization.

Lincoln Electric Co. Inc., The    Cleveland, OH 44117
Dec 02, 2011 Designed for welding in narrow TKY joints and poor fit-up conditions, Innershield® NR-440Ni2 features optimal toe wash-in and is capable of delivering flat bead face when used in vertical-up or vertical-down welding applications. Wire meets H8 diffusible hydrogen requirements over range of humidity levels. Available in 5/64 in. diameter on 14 lb coils, product is hermetically sealed in ProTech® packaging for moisture resistance.

Allpax Products, Inc.    Covington, LA 70433
Dec 01, 2011 Available for new installations and as retrofit solution, Retort Product Delivery System is suited for small footprint retort rooms that utilize 4-, 6-, and 8-basket horizontal retorts for preparation of shelf-stable food. System features 2-basket shuttle that travels at 240 fpm. Basket coupling system eliminates need for long loading arms, contributing to compact size.

Milacron LLC    Batavia, OH 45103
Dec 01, 2011 Available from 310-4,400 tons, Maxima Servo uses permanent-magnet servo motor in place of standard induction motor or frequency drive, enabling speeds from 0-3,000 rpm in both directions. Two-platen clamping system applies pressure directly to center of mold instead of corners for consistent part quality. Featuring modular design, machine includes dynamic speed control system, energy optimization and monitoring diagnostics, and internal gear pump that runs only when needed.

Flexicon Corporation    Bethlehem, PA 18020 8006
Nov 30, 2011 Integrating 2 Swing-Down® bulk bag fillers with pallet dispenser and powered roller conveyors, Dual Bulk Bag Filling System fills all popular sizes of bulk bags. Programmable controls allow fillers to operate separately or simultaneously, filling bags of same size or 2 different sizes. All system components are available constructed to industrial, food, dairy, and pharmaceutical standards.

Birchwood Casey    Eden Prairie, MN 55344 2138
Nov 29, 2011 Accommodating manufacturers that require same-day black finishing of small lots, mini BK-LC products enable safe, in-house blackening of parts and achieve durable satin black finish. LUMICLAD® process, which utilizes one heated dip-tank and does not require electrolytic current, forms black oxide coating on aluminum. Process works on all cast and wrought aluminum alloys, forming smooth, black, 1.5 micron thick finish that adheres tightly to aluminum substrate without any rub-off.

Avery Dennison    Pasadena, CA 91103
Nov 28, 2011 Supplied as acrylic-coated polyurethane film on polyester release liner, MED 5567A provides manufacturers of temporary adherent medical devices with alternative to acrylic adhesives and rubber-based hydrocolloid dressings. Breathability and absorbency promotes fluid handling capacity (FHC) without compromising adhesion properties and moisture vapor transmission rate characteristic of acrylic adhesives. Overall thickness is 125 µm, and transparent solution conforms to skin contours.

Avery Dennison    Pasadena, CA 91103
Nov 28, 2011 Free of PVC, PVdC, and plasticizers, InteliShield(TM) Barrier Film has antimicrobial inner surface and additional layers that lend to strength and secure bonding. Product incorporates 2 odor blocking technologies and antimicrobial agent that stays within film structure, remains active as bag fills, and will not enter body via stoma or leach into bag contents. Resistant to ripping and tearing, film can be sealed using techniques such as heat, heat impulse, or RF welding.

Bluestar Silicones USA Corp.    East Brunswick, NJ 08816-1100
Nov 28, 2011 Certified as biocompatible, SILBIONE® RT Foams are liquid materials enabling production of silicone foams with low density from 0.18-0.25 and open cells. Products meet ISO 10 993-1 and USP Class VI standards for cytotoxicity, skin irritation, skin sensitization. Available in wide range of hardnesses, foams prevent bed sores and decubitus. They also offer breathability, thermal control, and resistance to washing and sterilization.

Michelman Inc.    Cincinnati, OH 45236
Nov 25, 2011 Formulated to control slip, mar, and rub resistance in water-based pigmented and semi-gloss OPVs, inks, and industrial coatings, Michem Guard 1350 and 1351 eliminate need to use solvent-based surface modifiers. Both are nonionic dispersions of polyethylene wax that prevent blocking and cause minimal reduction in gloss. Michem Guard 1350 features narrow particle size distribution centered at approximately 1 micron, while Michem Guard 1351 contains efficient solids content of 65%.

Reduction Engineering    Kent, OH 44240
Nov 22, 2011 Designed for 24/7 operation, Bullet Series offers features to optimize efficiency and production for laboratory and small-volume applications. Single pneumatic cylinder, with upper feed roll that remains parallel with bottom roll, produces uniform pulling force with varying diameter strands. With minimal pellet hold-up points and 6 in. cutting diameter, series includes 3 models with 2, 4, and 6 in. cutting widths.

Baxa Corp.    Englewood, CO 80112
Nov 15, 2011 With included software, ExactaMix® EM2400 and EM1200 minimize risk of measurement errors, wrong drug selection, touch contamination, and patient infection in preparation of solutions. Calibration source allows multiple water calibration products, current patient formula is unloaded when user exits compounder screen, and priming process improves purging of air bubbles in inlets prior to pumping. Also, integration with DoseEdge® Pharmacy Workflow Manager is supported.

Select-Arc, Inc.    Fort Loramie, OH 45845-0259
Nov 11, 2011 Delivering flat, well washed beads with minimal weaving, Select 410-AP all position wire welds straight 410 SS while providing corrosion and oxidation resistance up to 1,200°F. Select 410NiMo, featuring nominal weld metal composition of 12% chromium, 4.5% nickel, 0.6% molybdenum, and max carbon content of 0.06%, delivers smooth stable arc with low spatter residue and well washed beads. Both gas-shielded, flux cored electrodes are available in .045 in. and 1/16 in. diameters.

Anver Corp. - Anver.Com    Hudson, MA 01749
Nov 11, 2011 Developed for lifting assembled equipment from conveyors to packaging systems requiring loads to be turned upside down, Anver PROT Series Side Grip Powered Rotator features motorized, powered rotation in both directions that can be locked in place and operated from single pendant control. Custom made side grippers with anti-skid suction pads securely handle up to 2,000 lb, depending upon load, while adjustable cross arms accommodate loads up to 12 ft wide.

Okamoto Corp.    Buffalo Grove, IL 60089
Nov 09, 2011 Capable of basic surface, slot, side face, and profile grinding with optimal straightness, flatness, and mirror finish over 2,000 x 1,000 mm area, ACC-208CHiQ double column, gantry-type surface grinder features 500 mm dia x 100 mm wide wheel driven by 22 kW motor and shift-plunge grinding cycles. Overhead dressing for rough grinding, combined with table top dressing for finishing, reduces cycle times, while touchscreen iQ control combines CNC technology and GUI for efficient operation.

Vishay Intertechnology, Inc.    Malvern, PA 19355 2143
Nov 08, 2011 Housed in LLP2510 package measuring 2.5 x 1.0 x 0.55 mm, Model VBUS54ED-FBL features low maximum leakage current of less than 0.1 µA at working voltage of 5.5 V. Four-line array offers breakdown voltage of 7.9 V at 1 mA and max clamping voltage of 12.5 at 2 A. Compliant with RoHS 2002/95/EC and WEEE 2002/96/EC, Pb-free device provides transient protection for data lines as per IEC 61000 4 2 (ESD) at 15 kV and is suitable for USB 3.0, HDMI, DisplayPort, eSATA, and 1394/Firewire applications.