Americase    Waxahachie, TX 75165
Apr 23, 2012 Made of .080 in. thick aluminum, Aluma-Trans Luggage Compartment Weapons Locker securely mounts to floor or deck of law enforcement vehicles and is designed to facilitate access during emergency situations. Locker bolts underneath floor or rear deck and secures weapons via heavy-duty, pad-lockable twist latch that activates internal dual locking mechanism. Exterior measures 40 x 14 ½ x 9 in., and each fully padded interior compartment is 31 ¾ x 12 x 3 in.; custom builds are available.

">

OKW Enclosures, Inc    Bridgeville, PA 15017
Apr 04, 2012 Featuring matrix of specifically designed slots in top and base panels, ventilated versions of COMBIMET 19 in. rack case series assist in-rack thermal management by allowing unrestricted airflow through enclosures. Products conform to DIN 41494 and IEC 297-1 standards for 19 in. equipment, are manufactured from aluminum, and have 2 ergonomic front panel handles. Range includes 1U, 2U, and 3U heights as well as depths of 10.43 and 14.37 in.

Extreme Engineering Solutions (X-ES)    Middleton, WI 53562
Feb 22, 2012 Designed to reduce Size, Weight, and Power (SWaP) of deployed military systems, 13.5 x 5.88 x 6.0 in. XPand4201 can be configured with up to 5 conduction-cooled, 0.8 in. pitch 3U VPX payload modules and one 3U VPX power supply module. This sub-½ ATR enclosure weighs less than 19 lb fully populated and suits C4ISR applications in vehicles. Conducted from modules to sidewall- and top-mounted heat exchangers, heat dissipates to ambient environment via forced-air cooling.

Flambeau    Baraboo, WI 53913
Feb 21, 2012 Measuring 15.25 x 8 x 6.25 in., Super Semi-Satchel(TM) (6925AB) is molded in translucent, clear, ACID-FREE polypropylene (PP). Case features 3 removable dividers, which provide up to 4 custom compartments in each satchel. In addition to being stackable, case features front latch, comfort grip handle, and structural design integrity. Adaptable to any number of uses, product stores media, tools, and photographs for general use.

Flambeau    Baraboo, WI 53913
Feb 21, 2012 Molded in translucent, clear polypropylene, ClearView(TM) Case (6952AB) measures 5 x 5¼ x 1 7/8 in. and aids users with storage and categorization of supplies. Cases can be stacked horizontally or vertically inside other ArtBin® boxes and feature lift-off lid. Potential users include paper crafters, those who work with pre-cut fabrics, and artists with diverse supplies.

Flambeau    Baraboo, WI 53913
Feb 17, 2012 Measuring 15 x 3¼ x 14 3/8 in., Quick View Carrying Cases include secure latches and built-in carrying handle for safe transport. Deep Base Model 6960AB features open core design suited for large or bulky supplies, while Divided Core Model 6961AB provides deep fixed and removable dividers. Divided Base Model 6962AB has removable tray that sits on top of divided area, providing not only additional bulk storage space, but also acting as secure lid to prevent migration of supplies below.

Flambeau    Baraboo, WI 53913
Feb 17, 2012 Molded in clear PET with translucent PP lids, 694xAB Twisterz(TM) jars come in 2 diameters and 2 heights. Base of one jar twists clockwise or counterclockwise into lid of another jar of same diameter. Different diameters and heights facilitate organization of small supplies, such as brads, embellishments, buttons, office supplies, small stamps, and beads. Part numbers are 6940AB (Small/Short Jar), 6941AB (Small/Tall Jar), 6942AB (Large/Short Jar), and 6943AB (Large/Tall Jar).

Thiele Technologies, Inc.    Minneapolis, MN 55418
Dec 29, 2011 Operating at speeds to 20 cases/min, CE 446 automatically selects, erects, squares, and seals bottom flaps of regular and half-slotted corrugated cases. Unit features Allen-Bradley MicroLogix PLC control with diagnostic capabilities and opposing vacuum cups in erecting station that enable case to be separated during erection, breaking score lines. Machine changeover can occur in less than 3 min.

UFP Technologies, Inc.    Georgetown, MA 01833 2107
Jul 28, 2011 BioShell(TM) Suspension Pack envelops liquid and frozen biopharmaceutical bags in durable film for suspension within cushion of air inside polycarbonate shell. Film absorbs shocks during impact, preventing damage to bag by eliminating contact with outer shell. All contents are in plain sight through UV-protective shell and film, and design allows for use with varying number of tubes, tube lengths, data loggers, clamps, or filters without sacrificing protection.

Western Digital Corp.    Lake Forest, CA 92630
Jun 17, 2011 Featuring polycarbonate exterior and shock-absorbing elastomer cushion inside, WD Nomad(TM) Case protects My Passport® portable hard drives from drops as high as 7 ft. Heavy-duty latch and silicon liner seal out dirt, dust, and moisture, while molded exterior ring allows user to attach carabiner, cable, or nylon strap. With opening for USB connector, user can access drive while it remains in case.

VEROTEC Inc    Londonderry, NH 03053
May 10, 2011 Veroshield 19 in. EMC-screened rack case is offered in 1U high and 10.4 in. deep version as well as 2U and 3U high, 14.4 in. deep models. Typical attenuation figures are in excess of 110 dB up to 10 MHz, falling linearly to 40 dB at 1 GHz. Product features flat panel construction and is manufactured from 0.9 mm zinc-plated steel to maintain electrical conductivity throughout unit. Removable top and bottom covers enable access to internal components.

VEROTEC Inc    Londonderry, NH 03053
Apr 19, 2011 Designed to accommodate electronic, electric, and electro-mechanical equipment, Veroshield Rack Case comes in 3 sizes: 1U high x 10.4 in. deep, 2U high x 14.4 in. deep, and 3U high x 14.4 in. deep. Typical attenuation figures are in excess of 110 dB up to 10 MHz, falling linearly to 40 dB at 1 GHz. Constructed from 0.9 mm zinc-plated steel, case maintains electrical conductivity throughout. Additional 19" aluminum front panel, external to screened enclosure, is provided to optimize appearance.

Pelican Products, Inc.    Torrance, CA 90505
Oct 28, 2010 Constructed of rotationally molded polymer, ISP Cases are engineered with wave design stacking ribs on lids and molded-in discs on bottoms that work in tandem to lock cases together in stack. Units are available in 6 sizes that accommodate 4-25 cu-ft of storage space. Optimized for most known pallet sizes, cases include O-ring seal, internal atmospheric purge valve, and up to 8 comfort-grip polymer handles. Lockable steel cable catches with cobalt finish and card label holder are standard.

Fischer Elektronik GmbH und Co. KG    Lüdenscheid   Germany
Sep 14, 2010 Decorative cases feature UL 94 V-0 rated plastic covers and slip resistant feet or seals, enabling use as table, desk, or hand-held case. Units include guide slots for PCBs, conductive surfaces and seals which ensure EM compatibility, and various IP classes of protection. They can also be specified with finely ground or precisely milled surfaces, scratch- and abrasion resistant Nextel(TM) lacquer coatings, and aluminum profiles and sheets labeled using laser or screen printing.

Fischer Elektronik GmbH und Co. KG    Lüdenscheid   Germany
Sep 08, 2010 Combination cases manufactured with profiled aluminum can be combined with one another as well as with modules of other profiles to form tube. Front panel is fastened using screw and guide slots integrated in profile allow insertion of 160 mm Euro cards. Versions with EMC and IP protection incorporate flat seals between cover plates and case and by cord packing between profile halves.

OKW Enclosures, Inc    Bridgeville, PA 15017
Sep 08, 2010 Featuring all-aluminum design for RFI/EMI protection, TEKAM Enclosures each consist of extruded case body with internal guide rails for PCBs and 2 die cast end panels that are assembled by self-tapping screws. Customers can specify cases with flat end panels for handheld or portable use, or end panels with integrated wall mounting ears. Available in 9 sizes from 2.75 x 2.36 x 1.22 to 6.89 x 4.17 x 1.81 in., cases include 2 molded rubber gaskets for sealing.

Ghent Manufacturing, Inc.    Lebanon, OH 45036
Sep 01, 2010 Offered in 2 floor case sizes and one wall case size, Contempo Series directs attention to items or artifacts at full front view. Seamless clear glass front panel is flanked by frosted glass side entry doors bordered by wooden upper and lower base finish of light maple or cherry wood and choice of satin or bronze aluminum framing. Further accentuation is provided via interior recessed spot lighting and case backing, and full-length glass shelves are height adjustable.

Walls & Forms Inc.    Dallas, TX 75374
Sep 01, 2010 Standing 72 in. tall and occupying 24 x 48 in. footprint, multipurpose H-Frame consists of free-standing Grid Wall that is strong enough to handle heavy tools yet flexible enough to showcase anything. Unit can be assembled, even by untrained personnel, to provide merchandising opportunities for range of applications. In addition to various accessories, display accommodates optional header that facilitates anytime exchange of graphics.

Ghent Manufacturing, Inc.    Lebanon, OH 45036
Aug 19, 2010 Available in 4 different models, Prominence Corner Cases are made with tempered glass and multi-faceted aluminum frame with hexagon-shaped corners. Units measure 28 x 77 x 28 in. and come with Chrome or Dark Bronze frame finish. Each case also includes interior lighting, built-in display locks, 2 adjustable full-sized tempered glass shelves, and steel shelving hardware.

CaseCruzer    Montclair, CA 91763
Aug 18, 2010 Intended for professional photographers, ATA-approved PSC200 includes customized polyethylene foam cut-out in lid for 15 and 17 in. Apple Mac Book laptops, as well as 11-compartment black padded divider system that can store cameras, lenses, and accessories. Exterior is injection-molded with ultra high-strength polypropylene copolymer resin. Measuring 21.75 x 13.75 x 8.99 in., IP67-rated waterproof case is dust tight, submersible, and resistant to corrosion and severe impact.