New xCase for iPad Pro Meets MIL-STD-810G Ruggedness Testing
Cases

New xCase for iPad Pro Meets MIL-STD-810G Ruggedness Testing

MobileDemand’s xCase for iPad Pro® 10.5 in. model come with rubber corner bumpers, port covers and secure grasp. Unit’s patented snap mount plate system helps in attaching iPad to cars, trucks, and forklifts. Unit withstands up to 26 drops from four feet and features briefcase handle and a backhand strap for effortless carrying and holding the tablet. The case allows mounting of tablet to...

Read More »
H500P Mesh White comes with full-mesh front panel with acrylic top panel.
Briefcase / Laptop / Business Cases

H500P Mesh White comes with full-mesh front panel with acrylic top panel.

MasterCase H500P Mesh White is designed with two pre-installed 200mm RGB fans fixed behind the mesh sits, which propels air into an all-white interior chassis. Unit comes with PSU shroud and CPU cut out cover for clean cable management. Unit allows user to show off one graphics card in the vertical position with the PCI slots provided at the rear. H500P is included with RGB controller connected...

Read More »
Video Tripod Manager 44 Rolling Case is equipped with shock-absorbing wheels.
Instrument / Tool / Equipment Cases

Video Tripod Manager 44 Rolling Case is equipped with shock-absorbing wheels.

Video Tripod Manager 44 Rolling Case is designed to hold cinema-sized tripods, stands, sliders and modifiers up to 40 in. in height. Unit comes with handles on four sides and protective zipper flap. Weighing 8 kg, product features multiple tie-down straps, Bolster cushions, adjustable lid straps and large interior mesh pockets. This case comes in rear skid rails and tall wheel housings and...

Read More »
Polyethylene Carrying Case comes with marked drill bit sizes.
Cases

Polyethylene Carrying Case comes with marked drill bit sizes.

Orange Polyethylene Carrying Case is designed for super speed tip drill bits. Unit is offered in rectangular and round cases and optimized from Walter metal index containers. Product comes with improved drill bit storage and sustains high temperature environments. Rectangular variant is suitable for use in shop environment where it can be stored in a drawer or shelf. Round model is ideal for...

Read More »
EIC Sits Down with Stevan Tubic from Impact Cases
Cases

EIC Sits Down with Stevan Tubic from Impact Cases

EIC Solutions has been supplying air conditioned transit case solutions to military and defense contractors for over a decade. Our air conditioned cases are available in numerous configurations and materials including roto-molded PE, fiberglass, composite and aluminum. We regularly partner with manufacturers from various industries providing off the shelf as well as custom cooling solutions to...

Read More »
Conduction-Cooled ATR Chassis meet military standards.
Computer Chassis

Conduction-Cooled ATR Chassis meet military standards.

Available in ATR format or in specialty Small Form Factor designs, Conduction-Cooled Chassis support both OpenVPX and MicroTCA architectures. Units come in standard Â-½ and ¾ sizes for 3U or 6U boards. There are also options for MicroTCA.3 Hardened form factor as well as heat exchanged versions. Enclosures are designed to meet MIL-STD-704, MIL-STD-810G, and MIL-STD-461. For...

Read More »
Armored Backpack provides drone protection.
Instrument / Tool / Equipment Cases

Armored Backpack provides drone protection.

Featuring armored FormShell™ outer construction and modular interiors, DroneGuard™ Backpack 450 AW provides protection for DJI Phantom and 3DR Solo quadcopter kits. Softly lined and padded dividers are adjustable to fit quadcopter, batteries, props, RD/transmitter, cables, manuals, and tools. CradleFit™ pocket suspends and safeguards 10 in.Â- tablet, while SlipLock™ attachment loops...

Read More »
Rugged Cases protect Microsoft Surface 3 and Surface Pro 4.
Instrument / Tool / Equipment Cases

Rugged Cases protect Microsoft Surface 3 and Surface Pro 4.

Featuring protected ports that prevent water and dust from entering device, rugged cases for Microsoft® Surface™ 3 and Surface™ Pro 4 are impact-resistant and pass MIL-STD-810G testing (26 drops from 4 ft). Construction is of enterprise-grade plastic, and rubber bumpers occupying each corner provide additional shock absorption.  Along with back hand strap, briefcase handle,...

Read More »
Display / Showcases

Preserving History at the State House

On January 27th, Secretary of State Nellie M. Gorbea celebrated the rededication of the State House Charter Museum. Over 50 members from the community including elected officials and history enthusiasts attended a reception in the State House Library followed by a ribbon cutting ceremony a the entrance to the Museum. The event highlighted the brand-new, locally-crafted display cases for the Royal...

Read More »
Precision Machining Solutions with Over 25 Years of Experience
Sponsored

Precision Machining Solutions with Over 25 Years of Experience

Quality, customer service, and unbeatable value are the hallmarks of Hogge Precision. Since 1989 we have built a reputation as the go-to precision machining source, servicing many demanding industries. For CNC machining and screw machining, there are few manufacturers that can match our capabilities and expertise. See our video to learn more.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers