Industrial Magnetics, Inc.    Boyne City, MI 49712
Apr 10, 2012 Featuring Magswitch® technology, On/Off Multi-Angle Welding Square and Ground is suited for welders that need accurate holding and precise placement of steel sheet stock, plate, and tubing. Heat-resistant up to 180°F, multi-purpose tool offers common welding angles of 45, 176, 75, 90, 105 and 135°, plus 300 A welding ground. To use, welder places square against work pieces in desired holding position and turns handle to ON position, activating magnet.

Industrial Magnetics, Inc.    Boyne City, MI 49712
Nov 21, 2011 Featuring MagSwitch(TM) technology, DynamicLift(TM) can be turned on/off using remote control, without need for air or electricity. Rare Earth lift magnet works on flat or round surfaces, and contains internal on/off release device that does not contact or damage part being lifted. For operator safety, magnet is equipped with sensor that will not allow it to release unless load is settled on surface. Battery-powered product is heat resistant up to 180°F and provides 600 lb lift capacity.

Asylum Research    Santa Barbara, CA 93117
Nov 11, 2011 Designed to attach to MFP-3D Atomic Force Microscopes (AFMs), Variable Field Module2 (VFM2(TM)) applies continuously adjustable magnetic fields parallel to sample plane approaching one Tesla with one Gauss resolution. Adjustable pole tips allow choice between max required field, sample placement, and min field gradients; field intensity is software controllable; and integrated Gaussmeter provides quantitative measure of applied magnetic field.

Master Magnetics, Inc    Castle Rock, CO 80104
Nov 01, 2011 Featuring neodymium magnet and 23 in. long shaft that snakes through difficult or confined areas, Retractable Retrieving Magnet Tool is suitable for extracting metal parts from cramped engine compartments, behind heavy equipment, down drains, and in heating vents. Thermoplastic handle and round knob enable user to activate magnet when tool is in position for retrieval, while shielded sides prevent tool from attaching to metal surroundings until activated.

Industrial Magnetics, Inc.    Boyne City, MI 49712
Aug 31, 2011 Featuring industrial-grade, stainless steel housing, USA-manufactured VersaLift(TM) can be used on flat or round, non-flexing steel in horizontal lifting orientation. Unit has built-in lift capacity test function, which helps user determine if load is safe to lift. With optional bolt-on lift bracket, flat parts can be lifted in vertical orientation without additional equipment. Embedded RFID chip tracks history of any maintenance and/or calibration performed on unit.

Industrial Magnetics, Inc.    Boyne City, MI 49712
Jul 07, 2011 Without requiring drilling, bolting, or welding, magnetic tie-downs with Magswitch® technology enable fast, temporary, and portable holding of tarps, signs, and banners to flat or round steel surfaces. Magnets activate by pushing handle slightly down and rotating 180°, and handle can be used as hook or cleat for fastening of object with grommets or ties. Multiple holding strengths are available based on application requirements.

Magnetic Products, Inc.    Highland, MI 48357
Jun 10, 2011 Used to remove fine metal contaminants in dilute-phase pneumatic conveying, Pneumatic Line Magnets (PLM) have sanitary design in all product contact areas, quick-release clamps to facilitate opening/closing, 100% stainless steel product areas, and Rare Earth magnet material. Food-grade, closed-cell gasket provides permanent seal, while seam-welded, magnetic, stainless steel, raised pole design promotes tramp metal retention between cleaning.

Master Magnetics, Inc    Castle Rock, CO 80104
May 24, 2011 Rated at 65 lb pull, industrial-strength Neodymium Rotating Magnetic Hook is suited for hanging heavy equipment. Unit can swivel 360° and swing 180°, adapting to any position without repositioning. Hook securely holds cables, tools, wires, and other equipment in workshops, garages, warehouses, and contractor vans.

Eriez Magnetics    Erie, PA 16514
Apr 29, 2011 Eriez® Aftermarket Model PM Rare Earth Drawer Magnets capture and hold fine and weakly magnetic particles, preventing plugged valve gates, machine damage and equipment downtime. Available in 4 sizes, products install in less than 5 minutes and feature guide-rod design that enables use with mild steel housings. Magnets can handle resin temperatures up to 250°F, and close tube spacing lends to effective ferrous removal.

Winkle Industries    Alliance, OH 44601
Mar 01, 2011 Designed for typical mag-grab applications, where scrap magnets are permanently fitted into top of grapple, OptiMag G-Series is fabricated to order with required fitting to suit any make or model of grapple. Deep-field magnets allow grapple operators to sweep work area without changing attachments or leaving cab. Units can maintain 75% duty cycles in continuous 24/7 operation.

Winkle Industries    Alliance, OH 44601
Feb 15, 2011 OptiMag L-Series includes 1,025-7,750 lb LDSA magnets with 625-5,625 lb lifting capacity and 895-7,500 lb ELDSA magnets rated for 575-5,550 lb loads. Latter is suited for smaller hydraulic scrap handling machines, and both types are recommended for fixed and mixed loads in general-duty scrap handling applications. Lifting surface and total weight are optimized to best utilize crane's load-lifting capacity. ELDSA models come with heavy-duty mechanical features and deep-field coils.

J. W. Winco, Inc.    New Berlin, WI 53151
Jan 27, 2011 To accommodate any application, metric size Retaining Magnet Assemblies are offered as flat and rod gripper, button, and U-Magnet types with steel, stainless steel, and brass material options. Magnets come in 4 materials, and assemblies are available in various sizes, threads, and finishes. Due to structure, each magnet assembly type has one magnetic pulling force level. Spatial effect of magnetic field is limited by shielded systems, preventing surrounding objects from being magnetized.

nanoTherics Ltd    Stoke-on-Trent ST4 7QB  United Kingdom
Jan 26, 2011 Based on proprietary magnet configurations and oscillating magnet arrays operating at fixed frequency, magnefect-LT(TM) promotes magnetic nano particle/DNA uptake into cells to improve non-viral gene transfection while maintaining cell viability, even with difficult cells types including neuronal and primary cells. With magnefect-LT, transfection times are less than 30 minutes.

Eriez Magnetics    Erie, PA 16514
Dec 22, 2010 PM Grate-in-Housings remove fine ferrous contamination from plastic pellets, flake, and regrind prior to injection molding machine, extruder, or compounding equipment. Magnets come in 3 standard housing sizes to suit application requirements and can even capture and hold pellets with encapsulated ferrous particles. Supplied in stainless steel housing, products feature 2 banks of Rare Earth permanent magnets and are suitable for operating temperatures up to 250°F.

Winkle Industries    Alliance, OH 44601
Nov 12, 2010 Intended for scrap recyclers, OptiMag D-Series features strap-wound coils and includes DSA deep-field aluminum scrap magnets as well as EDSA extra-deep field aluminum scrap magnets. Both types are suited for fixed and mixed loads in heavy-duty, high-production scrap-handling applications. With standard models ranging from 34-100 in. dia, magnets offer lifting surface size and total weight attributes that optimize utilization of crane's load lifting capacity.

Master Magnetics, Inc    Castle Rock, CO 80104
Sep 16, 2010 Available in 4 models with flat piece lifting capacity of 220, 660, 1,300, and 2,200 lb, Neodymium Lift Magnets are suitable for handling steel plate, forgings, and die castings in machine shops, warehouses, and industrial processing plants. Magnets eliminate need for slings or clamping devices and utilize On/Off release lever with safety lock to engage and disengage material. For safety, actual breakaway force is 3.5 times greater than maximum lift rating.

Bunting Magnetics Company    Newton, KS 67114 0468
Aug 27, 2010 Designed to maintain 15 psi rating for all types of dilute-phase pneumatic or gravity-flow conveying lines, Center-Flow Bullet Magnet removes ferrous fines as well as larger pieces of tramp iron from dry particulates. Unit features one-piece gasket that optimizes sealing along production line. Equipped with hinged cover, housing enables magnet to be removed and cleaned. Optional clear sight glass allows operator to see inside housing without opening cover.

Industrial Magnetics, Inc.    Boyne City, MI 49712
Jul 26, 2010 Utilizing Rare Earth permanent magnets, Eddy Current Separators recover non-ferrous metals, such as aluminum and copper, from diverse product streams. Units feature carbon fiber shell to minimize burnout, stainless steel sleeves on all rotors, removable side plates, and variable rotational speeds and belt heights. Separators are suited for material recovery facilities, glass clean-up applications, construction and demolition, auto-shredding, and electronics recycling.

Industrial Magnetics, Inc.    Boyne City, MI 49712
Jul 21, 2010 Suited for products that have higher moisture content or particle size and require high degree of purity, RotoDrawer(TM) Magnet separates ferrous metal from powder and bulk processed products. Motorized, cylindrical configuration of Rare Earth magnetic tubes on horizontal plane continually rotate through gravity-fed product stream. Rotational design, as well as splitter bars that further break up any clumps of product, keep flow moving through housing while capturing any ferrous metal.

Strong Hand    Los Angeles, CA 90660
Jun 09, 2010 Designed to hold workpieces from outside, 90° Corner Magnet(TM) leaves unobstructed space inside workpiece for welding. Boomerang-shaped magnet consists of 90° Magnet Square in reverse, with 90° edges on inside walls. Outside edge provides 60° clamping surface, while corner relief provides necessary clearance for clamping around overlapping flanges, lips, or edges. Measuring 3½ in. high, product is useful for holding flange in place for tack welding to pipes or tubes.