TCM Manufacturing USA, Inc.
West Columbia, SC 29172
Jun 19, 2009 WB Walkie, ER Walkie/Rider pallet trucks, CR Series center rider pallet trucks, ST Series walkie stacker pallet trucks, CB Series counterbalanced walkie stackers, and TR100 tow tractor are certified Class III by Industrial Truck Association. Featuring DC power, WB Walkie, ER Walkie/Rider pallet trucks have load capacity of 6,000 and 8,000 lb. Available in single or double pallet models, CR Series center rider pallet trucks have load capacity of 6,000 and 8,000 lb.

Crown Equipment Corp.
New Bremen, OH 45869
May 27, 2009 Engineered for narrow-aisle warehouse environment, Crown RR 5700 Series trucks feature Crown OnTrac(TM) Anti-Slip Traction Control that prevents truck from slipping on wet, dusty, or sealed floors, minimizing tire wear and risk of accidents or product damage. Pantograph reach trucks offer cornering speed control for safely negotiating turns. Suspended floorboard absorbs vibration, while padded seat adjusts to 3 positions. Vehicles offer reach heights over 36 ft with lift capacities of 4,500 lb.

DJ Products, Inc.
Little Falls, MN 56345
May 07, 2009 Designed to eliminate manual pushing of heavy garbage containers, Motorized Tilt Truck can haul loads up to 2,000 lb. Truck has variable speed twist grips that allow operator to travel at speeds of 0-3 mph forward or backward. With heavy-duty, 24 V motor powered by two 12 V batteries, truck can perform without recharging for up to 8 hr. Ergonomically designed vehicle is suited for daily duties in manufacturing and distribution facilities, convention centers, and hospitals.

DJ Products, Inc.
Little Falls, MN 56345
Apr 23, 2009 Featuring 6 hp motor that can provide up to 1,600 lb of horizontal push/pull force, chain-drive CartCaddyHD replaces need for lift truck in heavy cart and equipment pulling applications. Unit gets traction by transferring weight from load to drive wheels with 5,000 lb electric lift kit. Mover is suitable for carts with casters or carts on rails that go straight forward or backwards.

JLG Industries, Inc.
McConnellsburg, PA 17233 9533
Apr 21, 2009 Suited for landscaping, construction, and agricultural applications, JLG® 619A has 6,000 lb capacity at maximum reach height of 19 ft, while 723A allows 7,000 lb at height of 23 ft. Both models feature all-wheel steering along with single joystick control design. Controls include standard lift/loader mode feature allowing operator to switch primary function of x-axis from controlling telescopic function of boom to controlling tilt or dump function of attachment.

Yale Materials Handling Corp.
Greenville, NC 27834
Mar 05, 2009 Designed for maximum uptime, Series ERC-VG is equipped with electric motor and CANbus electrical system, which minimizes wiring and electrical connections. Drive axle absorbs significant forces during normal operation, while canted load rollers on mast absorb front-to-back and side-to-side forces for minimized adjustments. Industrial grade hydraulic components include O-Ring Face Seal fittings, 10 micron hydraulic filter, and cast iron stacked valve sections.

Raymond Corporation, The
Greene, NY 13778 0130
Feb 27, 2009 Able to operate in aisles as narrow as 66 in., 9000 Series Swing-Reach® trucks employ AC technology for longer battery run times, regenerative lowering, and LED compartment lights. ACR System(TM), which combines AC drive motor and AC lift motor, promotes acceleration, smooth direction changes, as well as quiet and precise traction and lift. Used for pallet handling or case picking, trucks can elevate up to 45 ft and handle loads up to 60 in. deep or 108 in. wide.

Raymond Corporation, The
Greene, NY 13778 0130
Feb 11, 2009 Raymond® Model 7600 Reach-Fork® features ergonomic seat that flips up and out of way for operator use in standing position. It includes 2 separate deadman pedals, 1 for seated use and 1 for standing operation. Steering column is also adjustable and open view mast has no center cylinder, optimizing visibility. Available in 4,500 lb capacity, truck lifts up to 37 ft, with 18.25 and 21.25 in. battery compartments offered. Raymond Deep-Reach® configurations offer 3,200 lb capacity.

Hyster Co.
Greenville, NC 27834
Feb 09, 2009 Featuring VISTA® mast, that provides load support for lifting and lowering while offering operator visibility, pneumatic H170-190FT line features drive axle and oil-cooled brake design, as well as large hubs that increase truck stability. They are powered by Cummins QSB3.3 Turbo Diesel Engine that provides 110 hp at 2,400 rpm and 305 ft-lb of torque. Modulated brake system provides consistent pedal travel versus brake line pressure for optimum operator control.

Crown Equipment Corp.
New Bremen, OH 45869
Feb 04, 2009 Built for stability, TSP 6000 Series turret stockpicker offers triple-stage mast option to optimize lift height while minimizing collapsed height. Mono-Mast design functions like telescoping crane, minimizing deflection and twisting associated with dual-mast designs. MoveControl(TM) seat lets operators choose one of 4 preset operating positions for optimal visibility, and Multitask control handles let operators blend multiple functions.

Raymond Corporation, The
Greene, NY 13778 0130
Nov 18, 2008 Featuring enclosed operator platform, Maintenance Platform Vehicle enables overhead maintenance and repair at elevations up to 371 in. Embedded ACR System(TM) regulates speed relative to elevated height at 1-6.5 mph when fully elevated. With capacity of 750 lb, platform provides room for operator, tools, and supplies. Lock on entrance gate ensures gate is closed before vehicle will operate.

Durham Manufacturing Company, The
Durham, CT 06422-2108
Oct 02, 2008 With overall height of 54 in., A-Frame truck is offered with louvered panel on one side and steel pegboard on other, steel pegboard or louvers on both sides, and louvered panels and steel pegboard on both sides. Each configuration is fitted to 1½ in. angle iron A-frame mounted on 12 ga steel deck measuring 48 x 30 in. with 1½ in. lip up. Unit's deck has reinforced channels and rides on 6 x 2 in. phenolic casters, 2 rigid, 2 swivel, with side brakes.

Toyota Material Handling U.S.A., Inc.
Irvine, CA 92623-7419
Sep 25, 2008 Integrating 11¼ in. dia steering wheel with adjustable steering effort, 8-Series ac Reach Lift Trucks are offered in 3 models including single reach lift truck in 3,500 and 4,500 lb lifting capacities and 3,000 lb capacity double reach model. Units come equipped with ac hydraulic system for efficient load handling, adjustable battery side gate retaining system, auto-position hold feature, self-adjusting electric disc brake, and active thermal protection cooling system.

Toyota Material Handling U.S.A., Inc.
Irvine, CA 92623-7419
Sep 25, 2008 Featuring common rail direct fuel injection system, IC pneumatic lift trucks are used in construction, lumber yards, metal fabricators, agriculture, and concrete and masonry yards. They come in 6 models with 22,000-35,000 lb capacities at 24 in. load center. Including 2-speed transmission with 2-stator torque converter, trucks offer synchronized steering, wet disc brake, fully oiled lift cylinders as well as Deluxe Steel Cab option for extreme environments.

Jungheinrich Lift Truck Corp.
Richmond, VA 23231
Jul 29, 2008 Equipped with super elastic tires, Models ETV C16/C20 operate on smooth floors in warehouse and bumpy surfaces outdoors. ETV C16 lifts loads up to 3,500 lb, while ETV C20 offers 4,400 lb load capacity. Based on 3-phase ac technology, trucks feature electric 180° steering, lift heights to 24.3 ft, and Jungheinrich Curve Control, which automatically reduces travel speed when cornering. Ability to work in aisle widths from 111 in. makes trucks suited for stacking and retrieval in restricted spaces.

Rubbermaid Commercial Products LLC
Winchester, VA 22601
Jun 26, 2008 Featuring drive speed of 1-3 mph to cover variety of terrain, Motorized Tilt Truck offers up to 5 hr or 15 miles of operation on single charge. It has ergonomic steering handle with 2 paddle controls that can only be operated with two hands, making it safer to steer and maneuver. With structural foam construction and hinged frame design, truck facilitates material handling in theme parks, stadiums, convention centers, airports, and manufacturing facilities.

Shred-Tech
Cambridge, ON N1T1B2  Canada
Jun 19, 2008 With throughput rate of 2,800-3,000 lb/hr, MDS-15GT features compact design that allows for maneuverability on narrow streets and crowded urban locations. It features cast aluminum ST-15H shredder which is equipped with Gripper Tipper bin tunnel loading system, hub knives, high strength alloy shafts, custom cleaning fingers, and vibrating feed hopper. Unit has angled compactor design and moving floor unloading system to ensure rapid discharge of shredded material.

Komatsu America Corp.
Rolling Meadows, IL 60008
Jun 04, 2008 Measuring over 24 ft tall, 960E-1 (960E) is able to carry 360 ton payload and weighs 1,270,000 lb when fully loaded. It is powered by Komatsu SSDA18V170 engine, which uses dual-stage turbo air handling system to deliver 3,500 hp. Truck features Vehicle Health Monitoring System that uses satellite communications and optional wireless download to allow technicians to use web interface to check pressures and trends, summarize payload, and be instantly alerted of critical faults.

Durham Manufacturing Company, The
Durham, CT 06422-2108
May 15, 2008 Shipped assembled and ready for use, 3-sided trucks come in models with either no shelves or 1-3 adjustable shelves. All models are available in 4 sizes from 48 x 30 in. to 72 x 36 in., with heights of 57 in. and 3 sides that extend 48 in. above base deck. Heavy-duty, all-welded construction is of 14 gauge steel, and finish is gray powder coat. Bolt-on 6 x 2 in. phenolic bolt-on casters - two swivel, two rigid - carry weights to 2,000 lb. Tubular push handle affords maneuverability.

Jungheinrich Lift Truck Corp.
Richmond, VA 23231
May 05, 2008 Suited for narrow-aisle warehouse applications, EKX 513-515 series are available in various configuration options with carrying capacities up to 3,307 lb and lift heights of over 49 ft. These high-rack turret trucks/man-up order pickers run on 80 V, 3-phase AC technology and incorporate RFID floor control. Latter allows speeds to be adapted to suit particular floor topology, and constant position measurement to be carried out for accurate recognition of all stock areas.