Material Handling & Storage

Material Handling & Storage

Bulk Dry-Storage Desiccator Cabinets feature self-closing doors.

Jan 12, 2017

Suitable for holding drums of dry chemicals, pharmaceutical powders, food or agricultural supplies, Bulk Dry-Storage Desiccator Cabinets prevent microbial growth and harmful effects of humidity. Capable of holding 2 or three 55-gallon or 30-gallon drums, or two, 3 or four 16-gallon drums, units feature fortified hinges and lift latches. Designed with nitrogen purged stainless steel reinforced... Read More

Material Handling & Storage

Countertop Medical-Grade Refrigerator

Jan 12, 2017

Fullerton, CA – The MLR102 Countertop Laboratory/Pharmacy Refrigerator by Helmer Scientific is energy-efficient and Joint Commission approved for medication storage. Compared to most compact countertop refrigerators, the 1.8 cu ft MLR102 requires less clearance (3 inches behind unit); noise generated is only 40 dBA.

Helmer's AdvanceCore™ technology ensures uniform and stable... Read More

Material Handling & Storage

Undercounter Pharmacy Refrigerator

Jan 12, 2017

Fullerton, CA – Storage of pharmaceuticals is possible in an ADA-compliant undercounter refrigerator from Helmer Scientific. Available at Laboratory-Equipment's website, these Scientific Series™ models provide air-cooled temperature uniformity to protect raw ingredients or finished product. Doors are self-sealing so that set-point temperature is quickly attained after access. A... Read More

Material Handling & Storage

Material Master Bulk Bag Discharging System features Flo-Lock™ gate.

Jan 12, 2017

Featuring Seal-Master™ round bag spout access chamber, Material Master Bulk Bag Discharging System consists of electric chain hoist and Spider-Lift™ bag lifting frame. Designed with Sure-Seal™ pneumatic bag spout clamping system, product comes with Flo-Master™ bulk bag massaging system. Including 304 stainless steel rigid air lines and pneumatic fittings, unit features NEMA 12 control... Read More

Material Handling & Storage

SideWinder Vise eliminates need of re-indicating setup.

Jan 07, 2017

Available in SDW25 II and SDW35 models mounting on to 6 and 8-in. vises, SideWinder Vises feature integral bracket which allows mounting to machine table on stationary jaw end of Vise. Using Kurt Pull-Type design, unit reduces jaw deflection for accurate clamping. Featuring 80,000-PSI robust ductile iron bodies, unit comes with convenient locating pin and is designed to reduce setup time for... Read More

Material Handling & Storage

Versatile Crane Systems Comply with International Regulations & Standards

Jan 07, 2017

The crane systems manufactured by material handling specialists J D Neuhaus are designed for arduous operating conditions, and have a proven track record throughout worldwide installations. Industry applications include oil and gas exploration and processing locations, both on and offshore, where explosion-proof operating conditions are paramount. Utilizing an impressive range of compliance... Read More

Material Handling & Storage, Mounting & Attaching Products

PrimeSET Liner Hanger System comes with hold-down slips.

Jan 06, 2017

Featuring anti-preset qualities for reliability and performance, PrimeSET Liner Hanger System can be used in both cemented and open hole applications. Product uses premium sealing technology to seal annulus and secure liner in intermediate casing, balanced piston for prevention of pre-setting during process and torque lock for linear rotation. Hanger system is API V3 qualified and has large... Read More

Material Handling & Storage

Spirit™ Sand Plant features HDPE piping system.

Jan 05, 2017

Manufactured in four models ranging from 60-200 TPH and 1500-3500 GPM output models for UFR, Spirit™ Sand Plant configuration includes cyclone, dewatering screen, sump tank, and slurry pump. Designed with 100% cast urethane of 3/8-in. to 1-in. thickness for 12-in. and 16-in. models, product is made of lighter material. Featuring cyclone and dewatering screen, unit’s dewatering screen helps... Read More

Material Handling & Storage

Tools of the Trade... Know When to Hold ‘em. Know Where to Place ‘em.

Jan 05, 2017

A machine builder turns to Creform Corporation to help optimize its tool handling during production

Greer, SC - An industrial automation machine builder was looking for ways to organize and keep track of tools that were used during the building process. They looked to Creform and its engineers to design and build an application-specific tool cart to support operation.

The design... Read More

Material Handling & Storage

Qosmedix Expands Powder Spray Bottle Collection

Jan 05, 2017

Ronkonkoma, NY, January 5, 2017 – Due to popular demand, Qosmedix has recently expanded their innovative powder spray bottle collection by adding four new styles. These bottles were developed specifically for packaging powder formulations which can include dry shampoo, root touch up powders, fragrance powders, deodorant and even glitter formulations. The unique interior mechanism helps... Read More

Fluid & Gas Flow Equipment, Material Handling & Storage

Hawk Manufacturing Inc is the Exclusive Manufacturer for Dimple Magnetic Motor Oil Plugs.

Dec 30, 2016

We have been the exclusive manufacturer for Dimple Magnetic Motor Oil Plugs for 6 years. We have been involved with new designs and applications to constantly improve this product line. www.drainplugsmagnets.com

Hawk Manufacturing, Inc.

220 Zimmer Rd.

Indian Land, SC 29707

803-802-9777

Read More

Material Handling & Storage

High-temp Casters and Wheels are abrasion and wear resistant.

Dec 29, 2016

Built to withstand rigors of extreme temperatures, casters and wheels are water, acids and chemicals resistant. Unit is temperature rated between 475 and 570 degrees Fahrenheit. Moving 2,000-pound load without damaging floors in 570 degree temperatures, unit comes with stainless steel precision ball bearing which is rated up to 750 degrees Fahrenheit. Reinforced with injection molded 33% Glass... Read More

Material Handling & Storage, Materials & Material Processing

Conveyor allows both to and fro movement of operators.

Dec 29, 2016

Incorporating 13 drive zones, common portable frame and air shock assisted powered lift gate, Conveyor features one On/Off button for controlling. Unit comes with 1.9 in. IP65 rated rollers. Designed with stainless steel support system mounted on casters, unit allows 5 ft. by 20 ft. movement for cleaning. Running at 45 FPM on product load of 25 pounds per lineal foot, conveyor is built with 24... Read More

Material Handling & Storage

Bulk Bag Discharger features discharge hopper with bolt-on top cover.

Dec 24, 2016

Featuring Stainless steel Seal-Master™ round bag spout access chamber, Bulk Bag Discharger includes gull wing doors for easy operator access. With Flo-Master™ bulk bag massaging system, unit promotes material flow. Device discharges bulk bags of material using patented system design. Including Flo-Lock™ discharge spout closure system, discharger halts material... Read More

Material Handling & Storage

Conveyer System comes with manual air valves and e-stops.

Dec 23, 2016

Designed with one 10 ft extending section and two stacked non extending sections, Conveyer System is built with overhead articulated crane for device picking up to 180 lbs. Having 94 ft length when extended and 45 ft under retraction, system incorporates guide ramps, fork lift pockets and stabalizers. Provided with push station button station for conveyer operation, the conveyer features... Read More

Material Handling & Storage

Conductix-Wampfler Achieves Several Firsts with Port of Montreal's E-RTG Conversion Project

Dec 22, 2016

At the Port of Montreal, Conductix-Wampfler has just completed the first E-RTG (electrified rubber-tyred gantry) container crane conversion in Canada. This conversion is believed to be the first performed on Liebherr RTG cranes. In addition to the usual benefits of RTG electrification "reduced fossil fuel consumption and reduced air pollution" Montreal Gateway Terminals (MGT), terminal... Read More

Material Handling & Storage

Trigger Spray Bottles and Bottles with Lotion Pump feature locking mechanism.

Dec 22, 2016

Keeping products from spilling during travel, Ergonomic Trigger Spray Bottles and Bottles with Lotion Pump are used for dispensing lotions, creams and liquid formulations with restraint. Products are offered in black and white PET lotion and spray bottles with 250 ml capacity.

Read More

Material Handling & Storage, Robotics

SCHUNK EGL: Intelligent Gripping Module

Dec 17, 2016

The SCHUNK EGL 70 mechatronic parallel gripper combines power and intelligence. With variable gripping force between 50 and 600 N it is one of the most powerful and flexible mechatronic grippers on the market and was specifically developed for industrial applications.

Since the finger position, closing speed, and gripping force are freely programmable within a maximum stroke of 48 mm... Read More

Material Handling & Storage

Ethernet Cable Clamp Tester™

Dec 17, 2016

Ensure the quality of your cable with ETS Ethernet Cable Clamps...

The ETS Ethernet Cable Clamp Testers (CC-101/102/109) allow for the injecting of a common mode current into CAT5e, CAT6A and CAT7 cables in order to test gigabit Ethernet for the common mode noise.

The CC-101 and CC-102 have (6) thumb-bolts allowing the release of the unit halves for cable insertion for testing... Read More

Material Handling & Storage

CM Weblok Assembly features double load pin retention system.

Dec 16, 2016

Suitable for synthetic sling lifting applications, CM Weblok Assembly’s design prevents pin from backing out. Meeting ASTM A9652 and WSTDA-RS1 standards, unit have 5:1 design factor. Featuring double load pin retention system, product is made of durable forged alloy steel and is 100 percent proof tested.

Read More