Michigan Pneumatic Tool, Inc.    Detroit, MI 48204-1184
Mar 07, 2006 Featuring base with adjustable depth up to 6 in., Model MP-22000RTR includes ¼ in. collet, button throttle for smooth operation and control, heavy-duty ball bearings, and replaceable plastic base cover. Air-powered unit is suited for wood, fiberglass, and aluminum routing in any factory or industrial environment.

Hilti Inc.    Tulsa, OK 74121
Mar 07, 2006 Five inch Model DEG 500-D and 6 in. Models DEG 600-D and DEG 600-P feature Smart Power(TM), which maintains constant level of grinding speed to minimize wear on 1,400 W motor. Low-profile gear case provides access in tight areas, and if power is interrupted, restart interlock helps prevent accidental starts. For added operator protection, ATC function interrupts electrical current into tool to minimize kickback if sticking disk causes tool body to move too quickly.

Option NV    Leuven 3012  Belgium
Mar 07, 2006 GlobeSurfer® HSDPA broadband wireless router enables users to establish hotspots with speed of up to 1.8 Mbps over HSDPA connection. Support and remote administration features include user-authentication capabilities that make it suitable for providing secure data connectivity to mobile or temporary offices. Router can also be used as back-up or disaster recovery solution for traditional wired networking and fixed lines.

Metabo Corp.    West Chester, PA 19380 4243
Mar 06, 2006 Combination kit comes with 2 tools, AC30 charger, and two 18 V 2.0 Ah Ni-Cad batteries. First tool, BSZ 18 Cordless Drill/Driver, delivers 549 lb-in. torque, has 20 torque settings, and incorporates Variospeed electronics for infinite no-load speeds to 1,450 rpm. Also included, KSAP 18 Cordless 6½ in. Circular Saw cuts off and rips lumber up to 2 1/8 in. Ergonomic unit has 2,500 rpm no-load speed, spindle stop system, and locking bevel plate for cuts up to 47°.

Atec, Inc.    Stafford, TX 77477-3604
Mar 06, 2006 Variable height, Vertical Build Station, Model PN 168-1000 is completely above ground, bolting to existing cement slab where possible and eliminating environmental hazards of in-ground hydraulic systems. It aids maintenance personnel by allowing operator to adjust working height when performing engine assembly or disassembly functions, as well as providing gravity assist during build.

SKF Motion Technologies    Lansdale, PA 19446
Mar 03, 2006 Ranging from 25-50 mm dia with leads from 20-50 mm, Series SLT features rotating nut with axial play, while Series BLT includes backlash elimination. Design allows drive motor to move with nut to minimize inertia and achieve linear speeds to 110 m/min. Rotating nuts realize max transmissible torque up to 803 Nm and max transmissible axial load up to 162 kN, depending on type. Applications include packaging and automation systems, laser cutting, and production machinery.

Centricity    Girard, OH 44420
Mar 02, 2006 Available with diameters from 12 in. to over 8 ft, MS Series is capable of operating directly on 380-480 Vac, 3-phase power without requiring auxiliary transformer due to its high-voltage control. Series features internal control power supply and supports direct wiring of unit to plant power. Single- and 3-phase, 200-240 Vac versions are also available. Applications include assembly, welding, inspection, dispensing, testing, and UV curing.

Mixing & Mass Transfer Technologies, Inc.    Pawcatuck, CT 06379
Mar 02, 2006 Offering retrofittable design for Newtonian and non-Newtonian applications, HI-FLUX Mixing Technology(TM) System optimizes mass transfer in high-viscosity shear thinning, fermentation gas-liquid systems. It utilizes up-pumping, axial flow mixing impellers inside internally baffled draft tube, vertically mounted inside mixing vessel. Intensive mixing is created within draft tube, and high rates of fluid circulation are produced throughout mixing vessel or reactor.

Foundry Networks, Inc.    San Jose, CA 95164-9100
Mar 02, 2006 Available in 4, 7, and 14 rack models, BigIron RX-Series 48-port 10/100/1000 Mbps Modules extend non-blocking Gigabit Ethernet capacity to 768 ports for single switch and 2,304 ports in standard 7 ft equipment rack. They use mini RJ-21 connectors and cables to streamline cable management. Each module supports redundant management, redundant switch fabric, and redundant power supply components with full compliment of switching and routing functions.

Sugino Corp.    Itasca, IL 60143
Feb 24, 2006 Capable of precision end-milling and face-machining operations, Varimec SSV-4 quill-fed Selfeeder offers chuck capacities from 0.07-0.787 in. Mechanical-feed, 1.5 hp, electrically-driven unit, programmed through R232C port or hand-held Programming Console, comes in 2 models with no-load spindle speeds from 250-1,750 rpm and 1,000-7,000 rpm and torque from 5.24-9.07 lb-ft and 1.33-2.29 lb-ft. Total stroke length is 9.83 in., and max cutting speed is 0.656 ips.

Milwaukee Electric Tool Corp.    Brookfield, WI 53005-2550
Feb 24, 2006 Available in 4½, 5, and 7 in. sizes, Abrasive Flap Discs are made from aluminum oxide discs with zirconia abrasive grain bonded to cloth backing material. They come in flat, extra thick, and conical configurations, and provide grinding and finishing in one operation. Fiberglass backing pad is flexible, providing optimal control for even disc wear.

Royal Products, Div. Curran Mfg. Corp.    Hauppauge, NY 11788
Feb 24, 2006 Available in varying lengths, Precision ER Collet Chucks feature runout of less than 0.0001 in. TIR between OD taper and ID socket. When used with Ultra-Precision ER Collets, overall system accuracy is 0.0003 in. TIR or better, which ensures evenly distributed chip load. Chucks feature tapered shank ground to AT-3 specifications for fit with machine tool spindle taper and ground clamping nut. Balanced to G2.5 at 18,000 rpm, they include serialized balance certificate.

Cincinnati Incorporated    Cincinnati, OH 45211 0111
Feb 24, 2006 Engineered for lean manufacturing, MAXFORM Hydraulic Press Brake combines 700 ipm ram speeds with ±0.0002 in. repeatability for bending of complex parts without deviation, drift, or error stacking. Machine is available in 90-350 ton models and lengths to 14 ft. Optional 6-axis, linear-motor-drive backgage provides 3,000 ipm repositioning speeds in X and Z axes. Bolt-on Quick Change ram nose maximizes ram protection by doubling load capacity to 30 tons/sq-in.

Microwave Data Systems Inc.    Rochester, NY 14620 4261
Feb 24, 2006 Solar-friendly, secure MDS entraNET offers Distributed Network Protocol routing over IP backbone network, allowing users to bring mission-critical information over Ethernet or serial gateway and onto IP-based networks. Using MDS entraNET in peer-to-peer networks provides ability to build out large and geographically distributed networks while maintaining near real-time response. It also provides redundancy in critical locations.

Extricom Ltd.    New York, NY 10004
Feb 23, 2006 Networking 24 high-bandwidth, UltraThin(TM) Access Points, Model EXSW-2400 creates large service zones that are suited for covering areas such as multiple hospital floors, large warehouses, and entire schools. Unit is central component of Interference-Free(TM) WLAN system, which creates extended zones of coverage for every available channel, by using each channel at every access point that is controlled by switch, without incurring co-channel interference.

Absolute Machine Tools, Inc.    Lorain, OH 44053
Feb 22, 2006 Engineered for high-speed mold machining, Super Hi-Net SHV-1000 has rapid transverse rate of 944 ipm for its X, Y, and Z axes, which measure 41.3, 24, and 20 in., respectively. It uses Schneeberger roller type linear ways on all axes and employs 24,000 rpm HSK-63A spindle that delivers 31 hp and 53 lb-ft torque. Other components include large diameter, pre-tensioned ballscrews; Meehanite castings; and Fanuc 18iM-B with alpha I series servo motors. Max workload is 2,640 lb.

Svensk Internationella Pressbyran, SIP AB    Stockholm S-114  Sweden
Feb 22, 2006 Able to withstand side contact and other mechanical forces that lead to premature tears, G-weight sanding papers are polyester-reinforced, paper-backed abrasive belts that can replace cloth-backed products. Grade G 247 TL features semi-open coat of silicon carbide and comes in 24, 36, and 40 grit, while G 845 TL features open coat of aluminum oxide and comes in 40 and 60-180 grit. Both are fixed to paper and polyester substrate with resin-over-resin bond.

AIDA-America Corp.    Dayton, OH 45424-6380
Feb 21, 2006 Equipped with programmable slide motion and adjustable stroke length for infinite number of combinations, ServoPro® enables stamper to turn one press into multiple machines. It features mechanical safety brake and direct drive, which give stampers ability to use full torque above 5 spm, and run multi-press transfer line in continuous mode. ServoPro technology is especially suited to forming of high strength and exotic materials.

Value Engineering Alliance, The    Cambridge, MA 02139-4772
Feb 21, 2006 Using 6 megapixel camera/lens, illumination, and image processing and analysis software, PC-based Count Accura provides exact counts of boxes or trays of pharmaceutical packaging inserts/outserts for FDA compliance, validation, or reconciliation purposes. It automatically locates containers and positions scanning lines when counting. Automated system handles boxes up to 12 x 24 in. containing up to 8 rows and up to 250 inserts/outserts with counting time less than 500 ms.

United Grinding Technologies, Inc.    Miamisburg, OH 45342
Feb 21, 2006 Featuring 1,000 mm capacity between centers for complex shaft-type parts, Studer universal cylindrical grinder model S33 1000 has modular design with digital control and drive systems, step-by-step programming, and 130 kg chuck capacity between centers. Basic wheelhead can be indexed at 0° or 30° for straight and angular plunge grinding, while universal turret wheelhead swivels manually or automatically for external, internal, and face grinding of workpieces in one setup.