Hypertherm, Inc.    Hanover, NH 03755 0010
Apr 27, 2007 Suited for small to medium sized companies, Hyspeed Plasma HSD130 cuts dross-free at 5/8 in. on mild steel, and features production pierce capability of 1 in. with max cutting at 1½ in. Machine includes LongLife® technology and 100% duty cycle. Before release, system is subjected to rigorous and exhaustive life testing procedures equivalent to over 10 years of use in operating environments from 14-104°F.

Greenerd Press & Machine Co., Inc.    Nashua, NH 03061
Apr 27, 2007 Featuring capabilities to 10,000 tons and bed sizes exceeding 240 in., compression molding press series is constructed with 4 post design that minimizes deflection and lean back while promoting consistent die alignment. Gib-guided slide withstands demands of dies that require off-center loading, and de-gassing cycle evacuates gasses from mold while part is curing. ANSI B11R.2-1995 R-2000 compliant series also features 4-corner leveling and touchscreen operator panel.

JP Sercel Associates, Inc.    Manchester, NH 03102
Apr 27, 2007 IX-200 Chromadice(TM) DPSS UV laser wafer singulation system can process 4 x 100 mm sapphire wafers/hr and is also suitable for wafer trimming and scribing. Providing 360° rotation, high-accuracy Z-theta capable air bearing stages enable continuous or limited travel, and include cog-free motor, zero gear backlash, and low wobble and bearing run-out. Unit achieves cuts down to 2.5 microns wide, and is available in 266 or 355 nm UVDPSS laser wavelengths.

REGO-FIX Tool Corp.    Indianapolis, IN 46268
Apr 26, 2007 REGO-FIX® balancing rings system enables standard toolholders to be upgraded to balanceable systems at any time. Without use of tools or weighted balls, it can balance toolholder and assembly up to 42,000 rpm at any G-rating. Uninhibited design lets rings rotate full 360° for infinitely adjustable weight distribution. Compatible with most balancing machines, rings are suited for operators seeking extended tool and spindle bearing life as well as optimal surface finish and chip load.

DeWalt Industrial Tool Co.    Hampstead, MD 21074
Apr 25, 2007 Intended for professional contractors, Model DW1810 adapts 9/16-1 3/16 in. hole saws with 3/8 in. shank, while Models DW1803 and DW1805 adapt 1¼-6 in. hole saws with 7/16 and 3/8 in. shanks, respectively. Each provides tool-free hole saw changing capabilities that allow users to attach and release hole saws during various jobsite applications. Mandrels are also available in 8-piece plumber's kit, 8-piece electrician's kit, and 14-piece master kit.

Hypertherm, Inc.    Hanover, NH 03755 0010
Apr 24, 2007 Integrating Powermax® G3 Series(TM) plasma system with standalone Sensor(TM) PHC Plasma Height Control or EDGE® Ti CNC with integrated torch height control, PowermaxEDGE suits small- to mid-range table applications. With Powermax1650, system cuts up to 88 ipm on ½ in. thick plate. EDGE Ti features 15 in. touch screen monitor and includes drives that support brushless motors up to 250 W. Windows-XP-embedded OS supports shape cutting software including HyperNest CNC for automated nesting.

Alphacos SA    Courroux 2822  Switzerland
Apr 20, 2007 Designed to satisfy need for safer practices due to needlestick injuries, Type 211 works with all marketed safety devices. Continuous motion, single-belt transport system provides smooth handling combined with quiet operation. Capable of achieving output of 350 assemblies/minute with Reject and Good discharge streams, machine includes stainless steel exposed metal surfaces, video control system, and touch screen operator interface terminal.

Creative Design & Machine, Inc.    Rock Tavern, NY 12575
Apr 20, 2007 Utilizing Flexible Post Blender System, companies can resolve loading, cleaning, and containment issues related to occupational exposure levels (OELs). Interchangeable vessels of any configuration can be filled, discharged, and cleaned outside of blending suite. By using docking methods and eliminating product transfer into intermediate vessels such as drums or bins, OELs are minimized.

Arrowspan, Inc.    Santa Clara, CA 95054
Apr 19, 2007 Providing multi-frequency support, 200 mW MeshAP 2180 can boost signal strength to 1,300 ft in open space. Users can choose between 5.8, 5.3, or 2.4 GHz, depending on requirements. Implementing layer 2 mesh routing, access point is intended for municipal Wi-Fi deployments for public safety, public access, campus deployment, construction sites, or managed services. Each unit consists of weatherproof enclosure with industrial grade temperature of -40 to 131°F.

Gensco America, Inc.    Decatur, GA 30035
Apr 18, 2007 Suited for rebar fabrication and precast industries, RAPID CUT tools include elongated handle versions that allow operators to reach directly into a form, or any awkward spot, with no bending. Tools are suited for cutting high-tensile wire and rod, wire mesh, strand, and rebar.

Accura Technics LLC    Keene, NH 03431
Apr 17, 2007 MicroTol(TM) features configurable work area that is totally enclosed for coolant containment. Standard X-axis travel is 8 in., while standard Z-axis travel is 4 in. Work area consists of a hydraulic chuck supported by Accura(TM)'s hydrostatic work spindle and hydrostatic bearings that provide added damping. The 20,000 rpm air bearing wheel spindle is rigidly mounted to machine base on micro-adjustable column, and grinding is performed with metal bond diamond wheel.

Metabo Corp.    West Chester, PA 19380 4243
Apr 16, 2007 Providing up to 549 lb-in. torque, BSZ 18 Drill/Driver can drill up to ½ in. holes in mild steel and 1 3/16 in. holes in soft wood. No-load speed is from 0-450 and 0-1,450 rpm. Able to bevel cut up to 47°, 6½ in. KSAP 18 Circular Saw cuts up to 2 1/8 in. deep at 90° and 1 5/8 in. at 45°. ASE 18 Reciprocating Saw delivers 0-2,700 strokes/min and has Quick blade-changing system. Kit also includes flashlight, AC30 Plus charger, two 18 V 2.2 Ah Li-Power 20 batteries, and carrying case.

SB Machine Tools    Schaumburg, IL 60173
Apr 16, 2007 With 8-station drum turret on each slide, Kitako HS4200i CNC Lathe offers x-axis gantry loading feed rates of 6,700 ipm. Unit features 4,500 rpm maximum spindle speed (5,000 rpm optional), rapid traverse rates, carrier indexing time of 1.5 sec, and 0.3 sec turret indexing per station. It offers variety of part processing methods and features 4-spindle technology to provide seamless cycling of work from loading zone to machining zone and back.

CGW, Camel Grinding Wheels, USA    Niles, IL 60714
Apr 16, 2007 Designed for cutting soft metals such as aluminum, 36-grit flap discs contain calcium stearate coating that liquefies under heat to keep them cool and to prevent loading on soft materials. Manufactured from blue-fired aluminum oxide grain and polyester heat-treated backing, discs can also be used on brass, copper, and zinc. Products are available in 4½, 5, and 7 in. dia.

NETZSCH, Inc.    Exton, PA 19341
Apr 13, 2007 Requiring 5 kW of input power, Micro Psi-Mix® pre-mixes and disperses particles then delivers finely pulverized solids into largest possible surface area of liquid to achieve homogeneous, fine, and completely repeatable dispersion. Pilot plant and small batch machine performs complete dispersion procedure in enclosed process chamber. It handles batch sizes from 15-700 L at production capacity of 100-400 kg/hr and speeds from 1,000-3,000 rpm.

AddisonMckee    Preston, Lancashire PR5 8AJ  United Kingdom
Apr 12, 2007 Featuring heavy-duty steel weldments, C-Frame Hydraulic Presses deliver full pressing force at any point through range of ram stroke, which offers adjustable force of 25-100%. Presses include precision-guided ram, removable bolsters, and light curtain, as well as rapid advance, pressure, and distance reversal features, along with water and oil cooling and AddisonMckee HMI. Imperial or metric versions are available in 25, 50, 75, and 100 ton variants.

BIG Kaiser Precision Tooling, Inc.    Hoffman Estates, IL 60192
Apr 11, 2007 With KAB connection featuring high clamping force, indexable insert drill is suited for drilling in inclined entry or exit surfaces. Available in 16-30 mm and 3 x D and 4 x D with KA6 connection, product includes straight flutes that ensure short distance for chip evacuation and high radial/torsional rigidity. Inserts are available for all kinds of workpiece materials with 4 cutting edges, while adjustable drill holder allows drills to cut fractional sizes.

Warner Electric    South Beloit, IL 61080
Apr 11, 2007 Magnetic Capping Headsets feature smooth torque magnetic technology that reduces variation in removal torque in bottling operations. Eliminating pulsing and vibration, headsetlowers shock on system, enabling long life of machine components and retention knives. With visual setting scales for top-load force and static torque adjustments, units feature all stainless steel construction, quad seals, and drain holes that allow them to withstand frequent washdowns.

Novellus Systems, Inc.    San Jose, CA 95134
Apr 10, 2007 VECTOR Express(TM) is plasma-enhanced chemical vapor deposition (PECVD) platform that offers thin film process performance critical to tool extendibility at 45 nm node and beyond. SmartSoak(TM) processing feature utilizes multi-station sequential processing architecture to control wafer heat-up independently from film deposition. Thin film thickness control is better than one atomic layer on 40 angstrom silane spacer oxide process.

Linksys    Irvine, CA 92614-5723
Apr 10, 2007 In addition to 6 active, independently programmable lines/accounts, SPA962 IP Desktop Phone features configurable 4 in. 320 x 240 true color LCD, dual-switched Ethernet ports with PoE, and standards-based call security. Linksys 32-Button Attendant Console (SPA932), for SPA962 IP Phone, simplifies incoming call handling by directing calls to requested party and monitoring line status from central location. It features 32 programmable speed-dial or direct station select buttons.