Machinery & Machining Tools

Machinery & Machining Tools

Power Tool Kit includes 2 saws.

Dec 10, 2001

KC24DC power tool kit includes 24V CR24DV reciprocating saw, C7D circular saw, 2 rechargeable batteries, and UC24YFB battery charger. CR24DV reciprocating saw features no-load speeds up to 2,600 SPM, stroke length of 1-1/8 in., carbon-tip blades, and tool-less blade retainer. C7D circular saw has no-load speeds of 3000 RPM, blade diameter of 7-1/4 in., fan cooled motor, built in spotlight, and... Read More

Machinery & Machining Tools

Safety Chucks are available in tilting and sliding models.

Dec 07, 2001

Safety Chucks offer replaceable jaws and can be supplied with square, diamond, triangle, or circular engagements. Sliding models utilize push-button release mechanism to ensure worker safety and shaft stability. Both sliding and tilting models can be flange-mounted, fixed or with sidelay adjustment. Read More

Machinery & Machining Tools

Impedance Head is unaffected by mass loading.

Dec 07, 2001

Model 8770A Impedance Head yields simultaneous dynamic acceleration and force data from identical acquisition points. Types 8770A5 and 8770A50 provide acceleration and force ranges to +5g and +51bf or ±50g and +501bf respectively. Outputs are phase matched to within 2° with acceleration and force sensitivities unaffected by mounting or torque. Quartz and ceramic piezoelectric sensing... Read More

Machinery & Machining Tools

Grooving Tool eliminates chip packing and sticking.

Dec 07, 2001

Tube Sheet Pro(TM) is suitable for grooving tube sheets in heat exchangers, condensers, and boilers with industry-standard double-groove configuration. Tool is available for 5/8, 3/4, 7/8 and 1 in. tube diameters. It has short tool stroke with no exposed mechanism, interchangeable pilots, and TiN coated steel blades for maximum cutter life. Set-up instructions are marked on adjusting collar for... Read More

Machinery & Machining Tools

Cordless Drill/Driver has 3-speed transmission.

Dec 07, 2001

DEWALT 18V heavy duty drill/driver kit has 3-speed all-metal transmission with MAX 3rd Speed for fast drilling and driving. Keyless 1/2 in. ratcheting chuck lock gives tight bit grip. High-torque motor delivers 450 in.-lb maximum torque. Extended run-time battery allows for more work per charge and no memory. Read More

Machinery & Machining Tools

Chucks have through-coolant capability.

Dec 05, 2001

Featuring thick wall design, Power Milling Chucks resist deflection even under heavy side loading. Concentricity is within .0002 in. T.I.R. at the nose. Seals are used to resist contamination of internal components. Chucks are available in BT 40 and CAT 40 and 50 shank sizes in 3/4 in. and 1 1/4 in. chuck capacities. Accessories include 2 straight slotted bushing/collet designs to handle shank... Read More

Machinery & Machining Tools

Modular Boring System offers 8 roughing boring head sizes.

Dec 05, 2001

Multifunction II Graflex® modular boring system incorporates 1 series of boring heads to handle size ranges of .700 to 8 in. Features include 1 dial adjustment to simultaneously set both blades, identical insert holders, master setting block, and raised insert holder, which can be adjusted independently or simultaneously. When set for simultaneous adjustment, blades can be adjusted using... Read More

Machinery & Machining Tools

Motorized Spindles work at speeds up to 100,000 rpm.

Dec 04, 2001

HF high-frequency spindles are available with power ranges up to 50 hp, and cartridge, flange cartridge, base mount and block body styles. They are suitable for applications such as internal grinding of bearing races, internal thread grinding, and other precision bore grinding applications. Read More

Machinery & Machining Tools

Flexible Discs grind and blend in one step.

Dec 03, 2001

Cotton fiber layers in Cut-N-Finish discs are impregnated with aluminum oxide grains and then pressed and bonded together, so discs constantly reveal fresh abrasives as they work. Suitable for edge grinding, surface blending, and working fillet welds on stainless steel and aluminum, discs are available in 4 1/2 and 7 in. sizes, and in A24, A36, A54, and A80 grit sizes in both flexible and medium... Read More

Machinery & Machining Tools

Punch Press features 46-station capacity.

Nov 30, 2001

MOTORUM-2048LTT 22 ton turret punch press operates with onboard electric servo motor drive mechanism. It features retractable repositioning pad buttons and retractable die function that offers die-to-stripper clearance of .875 in. Press provides maximum punching speed of 350 HPM and maximum nibbling speed of 800 HPM with +/-.003 in. precision. Other features include brush tables, built in parts... Read More

Machinery & Machining Tools, Portable Tools

Brushes feature high filament density.

Nov 30, 2001

Bradex® Composite hub fiber abrasive radial wheel brushes have embedded fibers across entire surface of their indestructable cores. This reduces filament breakage and allows filaments to perform consistently throughout wear process. Wheels are well balanced to aid in reducing machine fatigue. Read More

Machinery & Machining Tools

Plasma Cutting System has Boost Conditioner circuit.

Nov 29, 2001

Portable Powermaxl000® G3 Series has power supply that incorporates G3 advanced technologies, such as Auto-voltage input sensing; this allows the operator to run on voltages from 200 to 600 V, 1 or 3-phase, without need for manual linking. G3 design permits high-quality cuts over a wide range of thicknesses. Torches feature HyLife electrodes that extend consumable life. Nozzle wear is reduced... Read More

Machinery & Machining Tools

Spin Trimmer gets long-awaited improvements.

Nov 28, 2001

First major improvements to Model 2025 Spin Trimmer since 1988 include scrap dome jam detection device, incorrect trim detection device, audible alarm and beacon lights for detection devices, I/O PLC module for communication to other equipment, V-Belt for improved belt tracking, adjustable bottle discharge chutes with removable sides, and top acrylic dust cover. Read More

Machinery & Machining Tools

Collet Closer clamps down on machining centers.

Nov 28, 2001

High-pressure hydraulic Tri-Grip 5C collet is suitable for workholding applications in vertical and horizontal machining centers. It operates 3 collets simultaneously, with each on 2-1/2 in. center. Collet and part do not move, maintaining fixed height from part to part. It automatically locates collet locking screw access on top of collet block, which allows infinite collet or part orientation.... Read More

Machinery & Machining Tools

Hot Stamp Machine marks tubing and wire.

Nov 28, 2001

Model VT-5 portable marking machine can mark all varieties of thermoplastic tubing, wire and heat shrink sleeving. It comes in two models: hand-operated VT-5H and air operated VT-5A . Read More

Machinery & Machining Tools

Screw Inserter installs small screws in metal or plastic.

Nov 28, 2001

Stickscrew® works with StickShooter driver for accurate small-screw insertion. System eliminates loose screws by using sticks of up to 110 serially connected hex-head screws in sizes ranging from #0-80 to #8-32 and M2 to M3. Sticks are placed in driver and install and twist off cleanly when precise seating torque is reached. It works with machine, thread-forming, and thread-cutting screws in... Read More

Machinery & Machining Tools

Saws feature manual vise with quick release.

Nov 28, 2001

Model 220 and 270 saws have 2-speed direct-drive gear box and no belts or pulleys for more efficient operation. 220 and 270 come in 2 and 2.5 hp, respectively, with blade sizes of 96-1/2 x 1 in. and 115 x 1 in., and blade speeds of 118 to 236 fpm. Steel-fabricated base reduces vibration and is low-profile. Saws feature CE-Certified electronics and blade-door interlocks for operator and machine... Read More

Machinery & Machining Tools

Paint Striper applies low-VOC paints.

Nov 27, 2001

Rollmaster can effectively apply mandated low-VOC traffic paints with 100% transfer efficiency. It has polymer pump rollers and bronze pump bushing, produces crisp line edges with no overspray, and can replace aerosol type stripers. It pumps paint directly from 1 gal can to application roller. Because it uses peristaltic pump, no paint contacts any pump components, making clean up quick with... Read More

Machinery & Machining Tools

Workpiece Support grips parts on lathe.

Nov 27, 2001

Atling Model LE, LZ and LA self-centering steady rests maintain integrity of shaft or bar workpieces that tend to bend or deflect under unstable cutting loads. It fits CNC or conventional lathes. Rest has three roller levers with machined curved surfaces that arc toward center of workpiece at 120° angle. This allows precise contact between guide rollers and machined angle of levers and... Read More

Machinery & Machining Tools

End Stops reduce noise and excessive wear.

Nov 27, 2001

Cushioned End Stops are neoprene spacers that match ID/OD dimensions of shaft collars to reduce problems caused by metal-to-metal contact in linear stroke applications. PTFE version provides low coefficient of friction in rotary applications, and help prevent galling from stainless steel contacting stainless steel. End stops come in sizes from 1/2 ID x 1-1/8 in. OD up to 2 ID x 3 in. OD. Neoprene... Read More