Lincoln Electric Automation Division    Cleveland, OH 44117
Aug 17, 2010 Built to accommodate structural steel industry needs, Robotic Beam Cutting and Scribing System automatically generates tool paths from CIS/2 part files for cuts, copes, holes, slots, notches, cutouts, and assembly markings on beams up to 40 ft long, 4-44 in. wide, and 4-18 in. high. Servo-Robot laser vision, FANUC ARC Mate® 6-axis robot arm, and StruCIM® 3D simulation software promote accurate sensing of beam variations, optimized robotic cutting/scribing, and reduced prints/paperwork.

Hawking Technologies Inc.    Irvine, CA 92618
Aug 17, 2010 Suited for home and office users, HAWNR1 Hi-Gain(TM) Wireless-150N Router provides wireless connectivity as well as 4 wired 100 Mbps Ethernet ports for connecting computers that do not have wireless access. Throughput of 150 Mbps allows for fast transfer of multimedia files. For additional wireless range coverage, unit features 2 removable antennas that allow antenna upgrade. Mac or PC based Setup Wizard will automatically configure router for Internet access.

Scotchman Industries, Inc.    Philip, SD 57567
Aug 13, 2010 Stations of 50514-CM include 50 ton punch station capable of making 13/16 in. hole in ¾ in. material; 4 x 4 x 3/8 in. angle shear; and 14 in. flat bar shear capable of shearing ¾ x 4 in., ½ x 8 in., 3/8 x 10 in., and ¼ x 14 in. Fourth station, rectangle notcher, can notch 2 ½ x 3 x 5/16 in. and/or 2 ½ x 2 ¾ x 3/8 in., while fifth station allows optional pipe notcher to be mounted without removing angle shear. Lock-out tag-out accommodations and all necessary guards are included.

Scotchman Industries, Inc.    Philip, SD 57567
Aug 13, 2010 American-made CPO 350 features double clamping and self-centering vise that provides burr-free parts. Along with 135° mitering capability, saw features miter-locking device that automatically stops at 45° left, 90º straight, and 45° right for slotting and notching abilities. Additional features include double reduction gearbox, 2-speed motor that utilizes up to 14 in. dia blade, offering 4 7/8 in. OD round capacity.

OK International    Garden Grove, CA 92841
Aug 13, 2010 Suited for production soldering, touch-up soldering, and SMD rework, MFR-1100 Series incorporates SmartHeat® Technology, which dynamically responds to load, delivering required energy for each connection, while protecting sensitive components and substrates from damage. MFR-H1-SC hand-piece offers range of soldering and rework cartridges, while MFR-H2-ST hand-piece supports production soldering, and MFR-H4-TW Precision Tweezers hand-piece is suited for SMD removal of 0201 resistors to 28 mm SOIC.

Siemens AG    Munich D-80333  Germany
Aug 13, 2010 Designed for flexible SIPLACE SX placement machines, SIPLACE WPC provides electronics manufacturers with non-stop supply of component trays. Non-stop module allows operators to add full trays and remove empty ones without interrupting production flow. System automatically moves new trays to specified destination in vertical carrier with 28 positions. Depending on carrier position, trays can be exchanged in 2-3 seconds.

KLA-Tencor Corp.    San Jose, CA 95134
Aug 12, 2010 Utilizing Patented Broadband Spectroscopic Ellipsometry, white light reflectometry, and optional UV reflectometry optics technologies, Aleris(TM) 8330 measures film thickness, refractive index, and stress of non-critical films at 32 nm node and beyond. Unit offers remote recipe management and enables recipe import from previous generation platforms. Recipe sharing among Aleris tools facilitates flexible process control strategy within fab, covering high- and low-end film applications.

Parlec, Inc.    Fairport, NY 14450 0059
Aug 12, 2010 With Vernier scale, Precision Finish Boring Head provides .0001 in. incremental adjustments. Head eliminates movement between lock and unlock positions to minimize setting errors, and includes micrometer spindle that provides .001 in. per dial graduation. To maximize insert life, coolant-through design places spray directly on cutting edge instead of ahead of it.

Parlec, Inc.    Fairport, NY 14450 0059
Aug 12, 2010 Offered in inch and metric graduations, Small Diameter Boring System bores diameters ranging from .078-1.890 in. and can be adjusted up to .0001 in. on diameter. Through-hole in receiver allows boring bar to be telescoped for maximum rigidity under demanding cutting conditions. All boring bars and noses offer coolant-through capability and are balanced by design. To eliminate setting errors, system prevents movement between lock and unlock positions.

Suss Microtec AG    Usa, VT 05677
Aug 12, 2010 Designed to address challenges of mask manufacturing of 193i Optical Immersion and Extreme Ultraviolet Lithography, MaskTrack Pro Bake/Develop brings together ASonic® develop technology with Post-Exposure Bake regime for CD uniformity matching, crucial to sub 22 nm DPT production. Designed to equalize develop rate, independent of feature size and pattern loading, ASonic approach minimizes dark loss effects and removes risk of pattern damage/collapse for optimal pattern fidelity results.

Suss Microtec AG    Usa, VT 05677
Aug 12, 2010 Used for production of high-brightness light emitting diodes (HB-LEDs), MA100e Gen2 Automatic Mask Aligner processes wafers up to 4 in. and enables throughput of 145 wafers/hr. High-intensity exposure optics and pre-alignment options minimize process time, while functionalities such as proximity exposure for high resolution down to 2.5 µm maximize yield. All together, functionality helps LED equipment manufacturers support LED production demands.

Parlec, Inc.    Fairport, NY 14450 0059
Aug 12, 2010 With single-touch operation of most functions, Model TMM 1550 offers high-resolution video tool measuring and inspection. Cast-iron SYMMETRY design provides stability with no distortion due to thermal expansion and contraction. Plug-and-play option is available for comprehensive tool data management and communications.

McElroy Manufacturing, Inc.    Tulsa, OK 74158
Aug 11, 2010 Designed to fuse pipes from 63-180 mm, PitBull® 26 features Centerline Guidance System and hard anodized aluminum wear surfaces for corrosion resistance. Semi-automatic locking cam maintains force during cooling cycle, while thrust-bearing-equipped clamp knobs minimize torque required to clamp and round pipe for fusion operations. Three models include 6 in. DIPS with 100-120 V input voltage, 6 in. DIPS with 220-240 input, and 180 mm unit with 220-240 V input requirement.

Jet Edge    St. Michael, MN 55376
Aug 09, 2010 Capable of cutting virtually any material, Idro line water jet cutting machines are available in 3 sizes, 1,700 x 2,000, 1,700 x 4,000, and 2,000 x 4,000 mm. IKC's capabilities include 600º rotation, max angle of ±60º, and dynamic precision from ±0.2 to ±0.5 mm/m, depending on tilt of head. With ground rack and pinion X and Y axes and ball-screw-driven 150 mm Z axis, machines maintain ±0.004 in. cutting tolerance and ±0.001 in. repeatability accuracy tolerance.

Ethernet Direct    Newburyport, MA 01950
Aug 09, 2010 Suited for factory floors and industrial office complexes requiring aesthetic design, Falcon FWI-705 links 2 or more separate networks to create single expanded LAN network. Unit features built-in 4 dBi directional antenna and supports 3 different operation modes, including Access Point, Repeater, and AP + WDS. To secure information, product comes with 64/128/152-bit WEP encryption and WAP function. Falcon FWI-705 is compliant with IEEE 802.3, IEEE 802.3u, and IEEE 802.11b/g standards.

Sunnen Products Co.    St. Louis, MO 63143
Aug 06, 2010 Able to size and finish hard-coated small-engine cylinders to micron-level accuracy, SV-1000 Series utilizes TC superabrasive tools designed for blind, ported cylinder bores. Modular system is designed for part diameters from 0.120-2.56 in., and includes 10 hp, 100-4,000 rpm spindle. Measuring 95 x 91 x 107 in., unit includes servo-controlled stroking drive and load-sensing tool feed system that senses where and how much to hone bore. Fully automated versions can support up to 4 spindles.

Vollmer of America Corp.    Carnegie, PA 15205
Aug 06, 2010 Combining rotary erosion and fluting with polishing wheel, Model QXD 200 provides mirror-like finish in single machine setup. Machine features 6 programmable axes as well as 6-position tool changer, which allows for flexibility in electrodes and polishing wheel selections that can be utilized in unattended operation. Offline simulation creates 3D model that can be incorporated into other software packages for verification of end results on tool geometry.

Agie Charmilles, LLC    Lincolnshire, IL 60069
Aug 06, 2010 With Intelligent Tool Measurement feature, Mikron LP Precision Series provides optical tool measurement at full spindle speed. ITM records tool tip with image sensors and then uses specialized software to clean up image, resulting in ability to obtain tool measurement with absolute Z-reference in micron range. Each linear axis, as well as rotation/tilt unit, has its own cooling circuit. Quick dispersion of heat results in geometric stability that provides high repeat accuracy in axial movement.

Steinmeyer Inc.    Bedford, MA 01730
Aug 06, 2010 Available in diameters from 12-125 mm, Combination Wipers consist of friction type finger wiper in front of felt wiper, which provides optimal sealing. Since felt is saturated with oil, product offers low-maintenance solution for machine designers. Redesign of wiper housing keeps felt wiper from shifting or rotating, preventing contaminants from entering ball nut while simultaneously lubricating ball screw.

Renishaw, Inc.    Hoffman Estates, IL 60192
Aug 06, 2010 Suited for multi-pallet machining systems, OSI with OMM-2 optical interface supports up to 3 machine-tool probe systems for automated part set-up, measurement, and tool setting. Unit combines with 1 or more OTS tool setters and 1 or more OMP40, OMP400, or OMP60 inspection probes, and only one OSI receiver is needed to process signals from probes that operate in modulated mode. Combined in tandem, OMM-2 interface units suit machines with long spindle movements and with partitioned work zones.