|
|
Advertisement
|
Micro Plastics, The Worlds Largest Manufacturer of Threaded Nylon Fasteners
Machine Screws, Nuts, Washers, Standoffs, Spacers, Rivets, Clamps, Clips, Knobs, Printed Circuit Board Hardware, Panel Fasteners, Wire and Cable Hardware. - - - FREE SAMPLES
|
|
|
Lubricants ->
Lubricating Greases
Lubricating Greases
(Showing headlines 21 - 35) 1 2
|
Greases keep equipment lubricated in wet environments.ExxonMobil Coal & Minerals Co.
Houston, TX 77063 2005
Apr 22, 2004 Available in NLGI Grades 1 and 2, Mobil Centaur Moly greases are formulated with calcium sulfonate thickener technology to deliver water resistance and protection from corrosion and pressure. Greases are designed for equipment that operates in wet environments or is subjected to demanding conditions such as heavy loads and severe sliding. Applications include heavy-duty truck chassis, heavily loaded industrial bearings, and construction and mining equipment. |
 Grease is highly water resistant.Jet-Lube, Inc.
Houston, TX 77028 5811
Nov 14, 2003 ALCO EP-73 Plus™ specialty grease, for all metal surfaces, adheres or injects effectively in fresh or salt-water applications. Aluminum complex base mixed with anti-wear additives provides -25 to +400°F service rating. It is suited for subsea, offshore, and marine applications and also acts as high-temperature bearing grease. Grease meets MIL-G-18458 (SH) and is available in sizes from cartridges to 400 lb drums. |
 Bearing Greases meet variety of lubrication needs.Dow Corning Corp.
Midland, MI 48686 0994
Sep 05, 2003 Molykote G-0100 mineral-based grease offers corrosion- and oxidation-prevention for motor bearings. Mineral oil-based Molykote G-0101 is suited for high-speed applications. Mineral oil-based Molykote G-0102 resists water washout. Multipurpose Molykote G-1001 suits most roller bearing applications. Synthetic oil-based Molykote G-2001 provides protection against wear and corrosion. Molykote G-6000 phenylether synthetic oil-based grease provides stability in high mechanical stress environments. |
 Food Grade Greases protect bearings and resist wash off.Total Lubricants USA, Inc. (formerly Keystone Lubricants)
Linden, NJ 07063
Jul 10, 2003
Type SFG fully-synthetic, food-grade greases are NSF H-1 Registered and have high load carrying properties. They are formulated using synthetic PAO base oil with premium complex calcium sulfonate thickener. Both grades protect across temperature range of -51 to +200°C, while demonstrating thermal and mechanical stability. They contribute to extended machine life while reducing contamination as required by Hazard Analysis and Critical Control Point System.
|
 Lubricants cover every trade professional's needs.WD-40 Co.
San Diego, CA 92138
Apr 25, 2003 Consisting of 4 products, 3-IN-ONE Professional Line suits lubrication needs of various trade professionals and includes petroleum-based High-performance Penetrant Spray and High-performance Drip Penetrant. Quick-drying Silicone Spray Lubricant has synthetic, no-mess formula that resists high temperatures and works in wet environments. Non-drip, heavy-duty, water- and heat-resistant White Lithium Grease lubricates and prevents rust and corrosion. |
 Universal Grease offers wide application versatility.Southwestern Petroleum Corp.
Fort Worth, TX 76161 0005
Mar 07, 2003 SWEPCO 121 Tri-Plex Universal Grease provides long life and wide application range. It is based upon Tri-Plex chemistry, combined with polymer modification for tight molecular structure. Tri-Plex chemistry significantly inreases service life, shear resistance, shock and impact resistance, extreme pressure capabilities, and water and high-temperature resistance. |
 Grease can be applied around fresh or salt water.Jet-Lube, Inc.
Houston, TX 77028 5811
Nov 18, 2002 ALCO EP-73 Plus™ has water-resistant aluminum complex base and anti-wear additives. Polymer additives further enhance moisture and corrosion resistance and ability to adhere to all types of metal surfaces. Service rating is -25 to 400°F. Grease meets MIL-G-18458 (SH) and can be used for equipment in hot humid climates, steam, and applications that subject or submerge equipment in water. Sizes range from cartridges to 400 lb drums. |
 Perfluorinated Oils and Greases are H-1 approved.DuPont Coating & Release Systems
Wilmington, DE 19880-0023
Oct 14, 2002 Krytox® FG products, approved for H-1 food processing applications, perform at operating temperatures from -70 to +762°F (continuous use), are insoluble in water, and resist any water washout. Rust and corrosion resistant, they are also non-flammable and chemically inert. Compatible with all metals, elastomers, and plastics, products do not carbonize. Oils are clear, non-staining, and non-migrating. Greases are clean, pure white, and non-migrating. |
 Bearing Grease offers extreme thermal stability.Barden Corp., The
Danbury, CT 06813
Sep 30, 2002 Type G-75 grease is designed for high speed machine tool spindle bearings. It combines fully synthetic base oil with Polyurea thickener instead of barium complex soap thickener. G-75 operates at 1.5 M dN continously and is standard on all sealed angular contact bearings. It is available in 30 cc dispenser. |
Greases suit extreme environmental conditions.Castrol Industrial North America Inc.
Downers Grove, IL 60515
Aug 16, 2002 Molub-Alloy® 6040 greases are formulated with petroleum base oils using calcium-complex sulfonate thickener. They are compounded with additives for extreme pressure characteristics and thin-film, high-pressure, antiwear protection. Greases resist corrosion, making them suitable for aggressive process water environments. Resistance to oxidation allows them to remain pliable and prevents corrosive activity toward bearings and other lubricated components. |
 Polyurea Grease works in high temperatures.Total Lubricants USA, Inc. (formerly Keystone Lubricants)
Linden, NJ 07063
May 24, 2002
PolyPerformance(TM) NLGI Grade 2 grease can be used in temperatures from -10 to +325 deg F, making it suitable for electric motor bearings in steel mills, furnaces, crushers, conveyors, automotive, railroad, and marine equipment applications. It contains inhibitors for rust and oxidation, and resists water and salt water washout, age hardening, throw off, and breakdown. Grease is rated NSF/USDA, H-2 and is available in cartridges, pails, kegs, and drums.
|
Hydraulic Fluids lubricate industrial machines.Hill & Griffith Co.
Cincinnati, OH 45204
May 01, 2002 GRIFLUBE line includes Premier AW Anti-Wear hydraulic and lubricating oils for heavy-duty hydraulic applications; Premier R&O hydraulic oils for circulating systems such as steam turbines; Gear Oil EP industrial gear lubricants for severe applications with extreme load and shock load conditions; Slide-Way lubricants for slides and ways; Aquatech FR 200 water glycol for diecast and permanent molds; and biodegradable Bio-Syn 68 fire-resistant fluid for foundry applications. |
Gear Oils have viscosities from ISO 100 to ISO 460.Dow Corning Corp.
Midland, MI 48686 0994
Apr 25, 2002 Molykote(R) synthetic gear oils include anti-oxidant additives, polyalpha olefin (PAO) oils, PAO blends with ultra-high purity (UHP) mineral oils, and neat UHP mineral oils. They resist emulsification in hot, humid, and wet operating environments. Made by chemically building molecules from hydrocarbon, oils feature identical, strong molecular bonds in saturated molecular structure. Kosher-approved oils are available in pour points down to -31 deg F. |
 Specialty Fluids suit metalworking and metalforming.Oak International, Inc.
Sturgis, MI 49091
Apr 03, 2002 Signature line includes: OAKFLO(TM) fluids for machine tools and metalworking; OAKFORM(TM) stamping and drawing fluids for metalforming applications; OAKWASH(TM) aqueous cleaners for in-line spray washers, vibratory and deburring systems, and general maintenance cleaners; OAKTEC(TM) corrosion inhibitors, available in solvents, oil, and synthetics; and OAKSPEC(TM) specialty fluids and lubricants.
|
 Grease and Oil have USDA H-1 rating.Krylon Diversified Brands
Cleveland, OH 44115
Jan 23, 2002 Tri-Flow(R) Food Grade Grease and Oil will not emulsify in dead-water washout. Non-staining grease, with pure synthetic base, withstands temperatures from -10 to +400°F. It prevents friction and wear on any metal-to-metal contact, and is compatible with most rubbers and plastics. Synthetic oil is fortified with Teflon(R) for increased lubricity. Low-foaming characteristics make it suitable for hydraulic systems. |
(Showing headlines 21 - 35) 1 2
|
|
|