Lubricating Greases

Related Categories
Lubricants, Green & Clean

Wire Rope Grease suits applications near waterways.

August 19, 2015

Certified as Environmentally Acceptable Lubricant, Earthwise™ EAL Wire Rope Grease coats wire rope as well as moving chain and cable parts to ensure long life and smooth, quiet operation. Semi-tacky, water-resistant characteristics enable lubricant to seal out damaging moisture, protect against rust formation, and shield against acid attack. Designed to meet specifications required by EPA’s Vessel General Permit, semi-fluid coating is biodegradable and exhibits minimal aquatic toxicity. Read More

Lubricants

Heavy Duty Grease extends service intervals for trucks.

July 2, 2015

Using proprietary stay in place formula, JT-6® Super Heavy Duty 460 Grease provides wear protection and extends service intervals for heavy-duty trucks. Water-resistant, synthetic-blend formula also offers pumpability over wide temperature range and protects against exposure to harsh corrosive anti-icing agents. Applications include fifth wheels, kingpins, throw-out bearings, U-joints, pins, and bushings in agriculture, construction, and heavy-duty off-highway equipment. Read More

Lubricants

Wire Rope Grease is formulated to be VGP compliant.

May 27, 2015

Available in pails, drums, or larger containers, biobased aluminum complex wire rope grease is Vessel General Permit (VGP)-compliant, contains >80% biobased content, and meets USDA biobased biopreferred labeling requirements. Biodegradable and non-toxic product, derived from NSF-registered Aluminum Complex Food Grade Greases, comes in NLGI grades 0 and 1, exhibits adhesive properties, and is resistant to water washout. Read More

Lubricants

Thermal Grease targets LED applications.

February 11, 2015

Made with high-purity thermal composites, JP-DL700 Thermal Grease exhibits optimal thermal conduction with high chemical stability. Product is non-corrosive, non-toxic, non-volatile, and non-flammable, causing no irritation to human skin. Grease can withstand long-term storage, does not easily solidify, and can be readily implemented in printing and coating process, making it suitable for High Bright LED thermal interface applications. Read More

Lubricants, Machinery & Machining Tools

Specialty Grease keeps mills running smoothly.

December 18, 2014

In cold rolling and galvanize process, QUAKERTEK™ CS 4602-EP can provide equipment protection that prolongs asset life and prevents unnecessary breakdowns. Calcium sulfonate grease, offering water washout resistance, will stay in place and lubricate bearings even when fully submerged in water. In addition, product prevents bearing corrosion and provides shear stability, maintaining consistency and not softening during mechanical working. Read More

Lubricants

Machine Tool Spindle Bearing Grease improves tool performance.

December 9, 2014

Promoting operation at higher speeds and load conditions, RACEGRD™ improves operation reliability for bearings in machine tool main spindles. This grease also delivers anti-seizure performance and makes it possible to switch to grease lubrication in automobile component machining tools. Furthermore, suppression of grease leakage from bearings reduces temperature fluctuations during operation. Read More

Lubricants, Materials & Material Processing

Ultra-Fine Filtered Synthetic Oil extends component life.

September 16, 2014

Designed to lubricate rolling bearings of high-speed machine tool spindles, Klübersynth FB 4 Series can also be used in hydraulic systems and components, including dirt-sensitive servo valves, where cleanliness standards/classes are predetermined by manufacturer. Purity of ISO VG grades 32, 46, and 68 helps extend component life by reducing wear caused by fine dirt particles in lubricant. Offering fully synthetic base, series consists of PAO oils of purity class 15/13/10. Read More

Lubricants

Plunger Lubricants and Robotic Greases suit die casting uses.

September 9, 2014

Formulated for aluminum die casting operations, PLUNGER SLICK™ 200T and PLUNGER SLICK™ WB10-T provide optimized boundary protection for plunger tips and shot sleeves. Key benefits include strong adherence to plunger tip, extended tip and sleeve life, and clean and bright castings. Featuring semi-fluid consistency, QUAKERTEK™ AXIAL 00-32 and QUAKERTEK™ LS 032B-EP are lithium type greases that provide wear resistance in robotic gearboxes. Read More

Lubricants, Machinery & Machining Tools

Disc Brake Wheel Bearing Grease meets severe duty requirements.

May 1, 2014

Supplied in 1 lb tub, Champion Disc Brake Wheel Bearing Grease (Part No. 4149I) consists of Lithium complex base grease formulated with refined base oil and additives. Appearance is smooth, somewhat tacky, slightly stringy, and blue. While capable of operations from -40 to +350°F, grease has dropping high point of >500°F. Other characteristics include mechanical stability, oxidation and corrosion protection, extreme pressure protection, and water resistance. Read More

Adhesives & Sealants, Paints & Coatings, Chemical Processing & Waste Management, Lubricants, Materials & Material Processing

Copper-Filled Grease suits heat transfer applications.

March 19, 2014

Consisting of single-part, 100% solids, thermally conductive, silicone grease, Heat-Away™ 640 is used in heat transfer applications from -60 to 550°F. Product is formulated as thick paste that will not flow after application and maintains stable viscosity over entire temperature range. With thermal conductivity of 4.68 W/m-K, grease optimizes thermal transfer between heaters and process vessels and various heat sinks used in heat exchangers in electrical and electronic applications. Read More

Lubricants, Machinery & Machining Tools

General-Purpose Grease withstands severe conditions.

February 24, 2014

Combining high-viscosity base fluid, calcium sulfonate complex thickener, and Monolec® wear-reducing additive, Monocal™ GP Grease protects equipment from heat, moisture, and heavy loads. Formula imparts high dropping point, inherent extreme pressure characteristics, mechanical stability, low oil bleed, and water resistance. Calcium sulfonate thickener prevents rust and corrosion, while Monolec protects against metal-to-metal contact, resists oxidation, and helps grease maintain consistency. Read More

Lubricants

Synthetic Greases target rolling and plain bearings.

February 6, 2014

Based on synthetic hydrocarbon oil and barium complex soap, ISOFLEX TOPAS NB 52 and ISOFLEX TOPAS NB 152 protect against corrosion, oxidation, and aging. ISOFLEX TOPAS NB 52 is suitable for temperatures ranging from -60 to 250°F and short peak temperatures up to 300°F, while ISOFLEX TOPAS NB 152 can be used in wide service temperature range of -40 to 300°F. Some applications include bevel gears, roller coaster wheel bearings, fan bearings, and pump bearings. Read More

Material Handling & Storage, Lubricants, Machinery & Machining Tools, Green & Clean

Boundary Lubricant prevents metal-to-metal contact.

September 9, 2013

Suitable for high-end manual chucks or power chucks, HPG500 Lubricant prevents metal-to-metal contact under high load and slow speed conditions. NLDI Grade 2 lubricating grease offers optimized water and moisture resistance, with water washout rating of less than 3%. Formula also provides rust and corrosion resistance, even in presence of synthetic and oil-based coolant environment. Lithium-free, all-purpose industrial lubricant can be used in bearings, bushings, slides, pivots, and tracks. Read More

Lubricants

Nano-Ceramic Grease is available in numerous package sizes.

June 21, 2013

DayLube features nanoceramic particles acting as sub-microscopic ball bearings to provide continuous lubrication to steel surfaces. Available in 16 oz tubes, jars, and 1 and 5 gal containers, it is chemically inert, wear-resistant, and maintains viscosity across temperature range of -40°F to +800°F. Nanoceramic particles remain intact to 2,500°F. Product also has high load-bearing properties, low dielectric constant, and resistance to steam, acids, and most chemical products. Read More

Lubricants

Vacuum Pump Oils and Greases resist degradation.

May 30, 2013

Manufactured to match specific user requirements, Vacuum Pump Oils and Greases optimize vacuum pump performance and extend service life. Products include PFPE lubricants, mechanical pump oils, PFPE high-temperature lubricating vacuum grease, diffusion pump fluids, heat transfer fluids, and variety of specialty greases and waxes. By resisting degradation and thermal decomposition, products help prevent need for excessive pump rebuilding. Read More

Lubricants

High-Temperature Grease targets racing and performance markets.

April 30, 2013

Incorporating polymer technology and premium additives, Poly 7® Red offers maximum lubricity and adhesion as well as resistance to water washout, sling-off, oxidation, rust, and corrosion. Extreme-pressure chemistry and polymer technology work together to minimize wear and protect against scuffing, spalling, fretting, and pitting of bearings, gears, and bushings. High base oil viscosity index optimizes pumpability, while lithium complex thickening provides run-out resistance at high temperatures. Read More

Food Processing & Preparation, Lubricants

Food Grade Synthetic Grease features NSF® H1 rating.

March 25, 2013

Fortified with PTFE, Sprayon LU™207 Food Grade Synthetic Grease is waterproof, non-melting, and designed specifically to lubricate, seal out water, and resist chemical attack under demanding conditions. Product features temperature range of -10 to 325°F and dielectric strength of 30.0 kV. With extreme pressure qualities, grease forms durable film of lubrication that prevents metal to metal contact and is extremely resistant to water washout. Read More

Lubricants, Machinery & Machining Tools, Green & Clean

Cutting/Lubricating Oil has low-VOC, nonchlorinated formula.

October 24, 2012

With VOC levels of less than 75 g/L as per Southern California AQMD Rule 1144, TRIM® OM 313 clean running straight oil does not contain any active sulfur, is free of chlorine, and does not stain parts. Suitable uses include form-tapping, thread-rolling, and Swiss screw machines. Offering oxidation inhibition for extended life, oil is proven on steel and bearing steel parts and safe for use on aluminum alloy and steel alloy parts as well as cast iron, copper, brass, and bronze. Read More

Lubricants

Industrial Grease withstands exposure to water.

October 4, 2012

Containing Almasol® solid additive, 5% molybdenum disulfide, and calcium sulfonate thickener, Almamoly™ HD Grease provides wear-resistant lubrication, staying in place even when it is squeezed out of contact zone due to extreme pressure or heavy shock loading. Calcium sulfonate inherently prevents rust and corrosion, while exhibiting optimal mechanical stability and extreme pressure properties. Applications include articulated trucks, backhoes, bulldozers, conveyors, excavators, and loaders. Read More

Food Processing & Preparation, Lubricants, Green & Clean

Biodegradable Grease serves in extreme temperatures.

July 3, 2012

Combining USA-grown natural seed oils, PTFE, and synthetic shear stable thickening system with anti-oxidants, extreme pressure, anti-wear, and anti-corrosion additives, HUSKEY ECO-LUBE EP 2 GREASE provides protection against friction, wear, and corrosion. Multi-service product is suitable for extreme temperature conditions from -20 to 500°F. It is also NSF/USDA H-1 Registered and KOSHER approved for use in all areas where incidental food or potable water contact may occur. Read More