Kimball-Midwest
Columbus, OH 43228
Aug 19, 2008 Available in solid stick applicator, Ultra-Cut Gold Stick is suited for tough alloys, and certified for food processing facilities. Solid stick applicator eliminates messy application of fluid lubricants, and is completely biodegradable and non-toxic.

Synco Chemical Corp.
Bohemia, NY 11716
Aug 07, 2008 Super Lube® Grease with SYNCOLON® features SYNCOLON PTFE, a solid lubricant that does not evaporate. Particles in this proprietary ingredient fill surface irregularities in mating parts and are compacted to form smooth, lubricated surface. Formulated to be environmentally safe, this multi-purpose synthetic lubricant exhibits anti-friction, anti-wear, water- and salt-water resistance, anti-rust, and anti-corrosion properties. It also resists temperatures to 650ºF.

Shell Lubricants
Houston, TX 77002
Jul 16, 2008 Shell Turbo Oils CC and Turbo Oil J feature water separation characteristics and resistance to formation of sludge, aeration, and foaming for industrial turbines. Meeting/exceeding OEM specifications for most gas and steam turbines, Turbo Oils CC have additive system that provides reserves of wear protection for highly loaded gears without sacrificing resistance to deposits or oil life. Turbo Oil J is formulated to meet demands of MHI combined-cycle gas and steam turbines.

Kimball-Midwest
Columbus, OH 43228
Jun 17, 2008 Suited for drilling, taping, saving, sawing, milling, threading, engraving, and punch press work, Hard-Kut Hi-Performance Metal-Working Lubricant can be applied to stainless steel, heat treated steel, cast iron, nickel-chromium steel, aluminum, monel, and range of other hard metals. Multifunctional lubricant contains no hazardous ingredients, stays where it is applied even in vertical and overhead situations, and can be thinned with water as needed.

Krylon Products Group
Cleveland, OH 44115
Jun 04, 2008 NSF-registered and P1-rated, Sprayon® Belt Dressing contains no asphalt or rosin, and will not glaze or collect dirt/dust. It is used to condition and increase pulling power of leather, rubber, canvas, fabric, flat round or V belts; auto fan belts; farm machinery belting; and all industrial belt drivers. Equipped with SPRAY ANYWAY(TM) valve, product can be applied directly to belts and sheaves of V belts while in use.

Henkel
Rocky Hill, CT 06067
May 21, 2008 Loctite® Freeze & Release shock-freezes metal parts, allowing lubricating oils to penetrate into rust layers. Available in 400 mL aerosol can, low viscosity lubricant instantly freezes seized and rusted parts to -45°F, which creates hairline cracks in rust layer as metal contracts. Cracks enable lubricating oil to penetrate by capillary action into rust layer. After 1-2 minutes, assembly can be dismantled.

Shell Lubricants
Houston, TX 77002
May 21, 2008 Mineral oil-based, zinc-free Shell Delima S Oils are designed to accommodate speed and technical performance required in paper-making machinery. Circulating oils allow for free movement of surfaces, prevent corrosion, and cool system to prevent wear in lubricated parts of paper machine. Used in manual, ring, collar, or rolling bearings of paper machine dry end, oils effectively disperse contaminants while providing water separation in reservoirs.

Henkel Loctite Corporation
Rocky Hill, CT 06067
May 15, 2008 Loctite® Freeze & Release is low-viscosity, spray-on lubricant designed to shock-freeze metal parts, allowing lubricating oils to penetrate into rust layers. It freezes seized and rusted parts to -45°F, which causes hairline cracks to form in rust layer as metal contracts, allowing lubricant to penetrate by capillary action. Threaded assemblies can be dismantled in 1-2 min and product is available in 400 ml aerosol can.

Metallized Carbon Corp.
Ossining, NY 10562
Mar 25, 2008 Consisting of carbon/graphite Antimony impregnated materials, Metcar grades M-343 and M-346 operate in difficult environments where oil and grease lubrication cannot be used due to temperature limitations. Products are designed for medium to high loads and are suited for bearings and thrust washers in both dry and submerged environments. Offering lubricating qualities and wear resistance, materials are completely homogenous and provide continuous lubrication.

ITW Rocol North America
Glenview, IL 60025
Mar 04, 2008 Featuring natural, environmentally safe formulation, Accu-Lube LB4600 provides lubricity required for sawing and machining of aluminum in near-dry (MQL) machining operations. Non-toxic and biodegradable product, recommended for non-ferrous machining processes, has additive-fortified and mineral oil-free base oil made from renewable vegetable resources. Non-staining and odorless, this purple lubricant can be burned off during post heat-treat processes.

JAMES DURRANS &SONS LTD
England   United Kingdom
Jan 16, 2008 Based on nano-structured formulations of aqueous dispersion of lubricants and release agents, Aqualub Lubricants are relatively smokeless and protect forging dies from scoring, sticking, and other deformation defects such as adiabatic strain banding. Lubricating film is continually renewed and reinforced with severity of work being done during forging process. Supplied in paste, slurry, or neat consistency, lubricants are free from ammonia, chlorine, and phosphates.

Chemetall
New Providence, NJ 07974
Jan 11, 2008 Formulated from blend of silicone and nonionic emulsifiers, Oakite® FiSan E-Z Glide Conveyor Lubricant can be used on stainless steel, glass, aluminum, and plastic conveyor lines. It contains ingredients accepted by U.S. Food and Drug Administration. Dispensed through automatic feed systems, synthetic, near-neutral lubricant also exhibits spill tolerance.

Master Chemical Corporation
Perrysburg, OH 43552
Dec 07, 2007 Meeting stringent nuclear and aerospace chemical content and machining requirements, TRIM® C350 is suited for machining and grinding of aircraft air frame and power plant parts/components. Using synthetic ester technology, synthetic coolant does not use conventional sulfur or chlorine based EP additives. Product's pH neutral and less than 100 ppm total chloride working solutions provide corrosion and stain resistance even on most sensitive alloys.

Shell Lubricants
Houston, TX 77002
Nov 07, 2007 Shell Malleus® GL and Shell Malleus® OGM are water-repellent greases developed for lubrication and protection of open gears and wire ropes subject to extreme loads and temperatures. Both are Pb-free and contain extreme pressure chemistry as well as combination of solid additives to optimize load carrying capability. Shell Malleus GL is solvent-free, and Shell Malleus OGM includes solvent that promotes pumpability for extreme ambient climate conditions.

ITW Rocol North America
Glenview, IL 60025
Oct 31, 2007 Natural-/vegetable-based metalworking oil, Accu-Lube FG-2000, is suited for use in food and medical applications requiring machining, drilling, and tapping. It provides lubricity to cutting edge of any tool for sawing of solids up to 6 in. dia as well as tubing of any size. Consumed in cutting process, non-toxic and biodegradable product eliminates need for clean up, disposal, and flood coolant. It is safe for use on all metals and certified by NSF as safe for incidental food contact.

Milacron Inc.
Cincinnati, OH 45206
Oct 29, 2007 Designed to meet aerospace industry requirements, CIMTECH® 310 passes all bi-metallic and aluminum (7075) sandwich corrosion tests. Low-foaming, transparent product does not cause skin irritation and exhibits level of rancidity control that optimizes fluid life while minimizing need for additives. Areas of use include moderate- to heavy-duty machining and grinding operations, including creep feed grinding, on non-ferrous or ferrous metals.

Chemtura Corp.
Middlebury, CT 06749
Oct 26, 2007 Specifically designed for Asian market, AOSyn® GTP 46 is formulated with specialized additive package that utilizes Chemtura's Hatcol-brand polyester basestock as carrier fluid. Product offers thermal and oxidation stability, minimizing deposit formations. In addition to high viscosity and low volatility, lubricant possesses optimal demulsifying abilities and is compatible with conventional mineral-based compressor oils.

Kimball-Midwest
Columbus, OH 43228
Oct 23, 2007 Seize Release Nickel has non-melting synthetic carrier that dissipates without leaving carbon residue, depositing dry film of nickel and graphite to plate and protect surfaces against rust and corrosion. With temperature range of -300 to +2,600°F, water-resistant product withstands severe weather conditions and is suited for use on similar and dissimilar metals. Solution also resists seizing and galling as well as galvanic pitting on all kinds of machinery and metal fittings.

Shell Lubricants
Houston, TX 77002
Sep 12, 2007 Consisting of lithium complex soap thickener, synthetic base fluid, and additive package, Shell Albida® Grease SDS 1 was developed for plain and rolling element bearings operating under heavy loads and extremely slow speeds. Product provides corrosion and rust protection, and performs under operating temperatures from 25-120°C. Offering anti-wear properties, formula can be applied to rotary stokers, furnaces, hammer mills, and washer bearings.

Milacron, Inc.
Batavia, OH 45103
Aug 20, 2007 Synthetic CIMTECH® Z Fluids improve both machining and grinding applications within operations without using mineral oil. They are applicable for both heavy- and light-duty grinding and machining operations for ferrous and non-ferrous metals. Fluids are formulated to reject tramp oil while providing transparent substance.