WD-40 Co.
San Diego, CA 92138
Apr 25, 2003 Consisting of 4 products, 3-IN-ONE Professional Line suits lubrication needs of various trade professionals and includes petroleum-based High-performance Penetrant Spray and High-performance Drip Penetrant. Quick-drying Silicone Spray Lubricant has synthetic, no-mess formula that resists high temperatures and works in wet environments. Non-drip, heavy-duty, water- and heat-resistant White Lithium Grease lubricates and prevents rust and corrosion.

LPS Laboratories Inc.
Tucker, GA 30084
Apr 25, 2003 General-purpose lubricant is NSF H1 registered for use in meat and poultry plants. It penetrates to loosen rusted nuts and bolts and meets FDA regulations 21-CFR-178.3570 for incidental food contact. Oil contains no silicone or chlorinated solvents and is safe to use on metal, wood, and plastic surfaces. Available in 11 oz aerosol cans, product has 175°F flash point, specific gravity of 0.825 @ 77°F, and 15 to 300°F temperature range.

Mobil Branded Lubricants, Exxon Mobil Corp.
Fairfax, VA 22037
Apr 08, 2003 Mobilgard M Series Lubricants, consisting of M330, M430, M340, M440, and M50, meet challenges of medium-speed diesel engines operating on lower-quality residual fuel. They provide piston undercrown control, lube-fuel compatibility, and overall cleanliness.

Master Chemical Corporation
Perrysburg, OH 43552
Apr 03, 2003 Semisynthetic TRIM® SC285 cutting and grinding fluid concentrate is for extreme-pressure lubrication in drilling, tapping, reaming, and form-grinding operations. Product leaves synthetic-oil film that protects ferrous and nonferrous metal parts. It is safe for steel alloys, cast iron, and copper alloys. Lubricant does not contain chlorine or sulfur-based EP additives, DEA, nitrides, phenolic compounds, or formaldehyde releasers.

Morgan Advanced Ceramics
New Bedford, MA 02745
Apr 02, 2003 E/M® Air-Dry Solid Film Lubricants exhibit similar properties of thermally-cured lubricants, while providing flexibility to be field-applied to variety of substrates. Offering thermal stability and corrosion resistance, many are qualified to military and OEM specifications, such as MIL-PRF-46147C and MIL-L-23398. They come in quarts, gallons, 5-gallon pails, and 12-oz aerosol cans. Aerosol lubricants are ready to use, without need to add solvent.

Total Lubricants USA, Inc. (formerly Keystone Lubricants)
Linden, NJ 07063
Mar 28, 2003 Nevastane SL Series consists of food-grade lubricants made with synthetic hydrocarbon base stocks and additives. They protect under high loads at high temperatures, while also maintaining fluidity at low temperatures. Lubricants offer anti-wear protection, rust and oxidation protection, and anti-foam properties. All viscosities are compatible with elastomers and seals. ISO viscosities of 32, 46, 68, 100, 150, 220, 320, and 460 are available.

DuPont Krytox Performance Lubricants
Wilmington, DE 19880
Mar 06, 2003 DuPontâ„¢ Krytox® L linear, perfluorinated oils and greases allow for performance from -100 to +599°F in various applications. Products are available with XP thermally stable, soluble, anti-wear, anti-corrosion additive, which forms protective coating on metal surfaces for reduced wear, fretting, corrosion, and torque. Polymer chains are completely saturated and contain only carbon, oxygen, and fluorine.

Dylon Industries, Inc.
Cleveland, OH 44144 1045
Jan 10, 2003 Heavy-duty, water-based Grade FW-3382 forges warm or hot ferrous metals and is suitable for use on jobs that involve upsetting or extrusion. Product can be used on dies with temperatures from 225–600°F and does not build up. Synthetic dilutes with water, including hard water; dilution ratios are typically 10:1 or greater.

Anderol Company
East Hanover, NJ 07936
Dec 16, 2002 Biodegradable, synthetic ANDEROL BDC-46 lubricant passes ASTM D 5864 test rating while eliminating carbon and varnish build-up. Friction and wear are reduced via product's film strength and adhesion to metal. Made from base stock used in jet engines, oil includes additive technology that prevents corrosion, enhances water-separation, and minimizes lubricant contamination. It suits oil-flooded rotary screw and vane compressors as well as axial and centrifugal compressors.

Castrol Industrial North America Inc.
Downers Grove, IL 60515
Dec 06, 2002 Synthetic emulsion, Syntilo® XG 100 is formulated for grinding ferrous metals as well as nickel and titanium alloys. Extremely bioresistant, Syntilo XG 100 decreases problems associated with dirty, rancid soluble oils by resisting micobial attack in high contamination situations. It has low propensity to foam when applied through high-pressure nozzles, and remains clean running in hard water conditions.

Digilube Systems, Inc.
Springboro, OH 45066
Nov 21, 2002 Tactless and colorless Ultra-Film does not contain moly, solids, or zinc. It deposits clean, semi-dry film suitable for oil-lubricated chains, trolleys, slat-type conveyors, and roller chains that are subject to loads up to 400,000 psi and temperatures to 600°F. Ultra-Film does not attract airborne pollutants and particulate, reducing risk of drippage and parts contamination. It is supplied in 5 gal pails and 55 gal drums.

NYLOK Fastener Corp.
Macomb, MI 48042 4007
Nov 18, 2002 NYTORQ can be used on any fastener that requires controlled or lower drive torque during installation, such as tri-lobular and self-threading screws. Non-toxic, opaque colored lubricant has melting temperature of 248°F. It meets and exceeds Daimler-Chrysler specification MS9775.

Anderol Company
East Hanover, NJ 07936
Nov 12, 2002 Non-asphaltic Polyguard 4100 synthetic open gear lubricant reduces downtime and scheduled maintenance when performing ore mining and ball milling at extreme temperatures. Product allows for rapid set-up on gear teeth helping to prevent metal loss and reduces volatile organic carbon (VOC) emissions. Transparent amber color makes clean up, inspection, and maintenance simple.

Mobil Branded Lubricants, Exxon Mobil Corp.
Fairfax, VA 22037
Oct 18, 2002 Mobil DTE 21® consists of balanced formulation with additives and low-viscosity base oils. It is specifically designed for high-speed, gear-driven spindle bearings in precision machining centers. Anti-wear and load-carrying ability is demonstrated by its performance in FZG DIN 51534 test, used to estimate lubricant's gear-load carrying capabilities.

Henkel Loctite Corporation
Rocky Hill, CT 06067
Oct 17, 2002 Formulated for use in long-life industrial and severe-duty applications, ViperLube(TM) lubricants are composed of synthetic PAO (polyalphaolefin) base stocks. They offer mechanical and thermal stability; high load carrying capability; and resistance to rust, corrosion, and water. Lubricants consists of NLGI Grade 2/Severe Duty GC-LB Grease, 90w Gear Oil, and 10w Lightweight Oil, all of which are NSF HI rated for incidental food contact.

DuPont Coating & Release Systems
Wilmington, DE 19880-0023
Oct 14, 2002 Krytox® FG products, approved for H-1 food processing applications, perform at operating temperatures from -70 to +762°F (continuous use), are insoluble in water, and resist any water washout. Rust and corrosion resistant, they are also non-flammable and chemically inert. Compatible with all metals, elastomers, and plastics, products do not carbonize. Oils are clear, non-staining, and non-migrating. Greases are clean, pure white, and non-migrating.

Sprayon Diversified Brands
Cleveland, OH 44115
Sep 11, 2002 Sprayon® Liqui-Solâ„¢ MRO lubricants, cleaners, and maintenance products offer re-useable, adjustable spray triggers. Triggers allow users to dial in specified coverage, from fan spray to pin stream. To recylce/dispose of containers, users remove (and reuse) spray trigger and recycle empty can as scrap metal or dispose of it as non-hazardous waste. Sprayon Liqui-Sol containers come in 14 or 18 oz cans and include food-grade items.

Batson, Louis P., Inc.
Greenville, SC 29608
Aug 28, 2002 ShuR-BusT penetrant, lubricant, and demoisturant immediately cuts through dirt, rust and scale to get into parts that have been frozen by or encrusted with corrosion and oxidation. It leaves protective shield-like film, and seals out water to prevent moisture and corrosion. ShuR-BusT will not ignite and will not dry or harden. It penetrates through water when sprayed on boat motors and submerged parts.

Total Lubricants USA, Inc. (formerly Keystone Lubricants)
Linden, NJ 07063
Jul 30, 2002 Nevastane® formulas include lube, hydraulic, and compressor oils offered in synthetic, semi-synthetic, mineral base, emulsifiable, semi-fluid, grease, and spray formulations. Used to lubricate or to act as anti-rust film on equipment and machine parts, all formulas are NSF and USDA registered H-1 for incidental contact with food. Also available: Wet Lube 100 emulsifiable lubricant, Nevastane Flush Oil, and Nevastane 6 multi-purpose, white food machinery oil.

Henkel Loctite Corporation
Rocky Hill, CT 06067
Jul 10, 2002 Marine Grade Anti-Seize Lubricant protects assemblies exposed to high humidity conditions or direct contact with fresh or salt water. It reduces wear and protects against galling and corrosion in high-pressure applications, and resists wash-out from water spray. Lubricant is ideal for variety of fasteners and joints, or as dressing for water pump gaskets and flanges in marine and other applications that require submerging.