Lubricants

Lubricants, Materials & Material Processing

CRC® Freeze-Off (TM) Super Penetrant

May 17, 2010

Introducing the original CRC® Freeze-Off (TM) Super Penetrant - a unique penetrant that uses Freeze Shock Action to FREEZE, PENETRATE & LOOSEN rusted & corroded mechanisms. Upon contact, this super penetrant immediately drops the temperature of the area in direct contact with the spray. The freezing effect cracks the rusted surface, allowing CRC® Freeze-Off (TM) to reach deeper and work... Read More

Lubricants, Machinery & Machining Tools

Metal Cutting Oil performs in demanding applications.

May 10, 2010

Containing sulfur, chlorine, wetting, and anti-weld agents, light-colored Cut 'N Cool is suited for stainless steel, carbon steel, aircraft steel, cast iron, aluminum, and other hard alloys. Product's petroleum base helps prevent rust on machinery, tooling, and materials. Formulated to meet stringent environmental regulations, Cut 'N Cool comes in recyclable aerosol package. Read More

Lubricants

Water-Based Lubricant is suited for use with rubber parts.

April 23, 2010

Water-based lubricant, intended for rubber, plastic, leather, and metal parts, suits automobile and transportation industry applications such as O-rings, seals, gaskets, and weather-stripping. Also used as insertion and assembly lubricant, product eliminates noises such as squeaks, rattles, squeals, and whines. It exhibits thermal as well as chemical stability and provides clear colorless film... Read More

Lubricants, Portable Tools

Battery-Powered Grease Gun suits frequent, large-scale lubrication.

April 20, 2010

Battery Powered Clear Grease Gun features high-impact, fracture-resistant clear tube. Tube collars made of T6061 aircraft aluminum, and gun has maximum pressure of 8,500 psi, delivers up to 4.9 oz of grease per minute, and provides 19.2 volts of power. It comes with two 1,500-mAh rechargeable battery packs and 30-in. whip hose, as well as battery charger and hard plastic storage case. Cartridge... Read More

Lubricants

Tube Bending Lubricant is offered in 5 and 55 gal containers.

April 16, 2010

Designed to stay where it is applied, Accu-Lube JL-12 opaque gel lubricant can be pumped or hand-applied directly to tube or bending mandrels, leaving clean coating on mandrel that will not build up over time. No cleaning is required before welding and lube can be easily cleaned before paint or plating. Read More

Lubricants, Materials & Material Processing

Introducing New Mobil DTE 10 Excel Series

March 26, 2010

A new standard in energy efficient productivity The new Mobil DTE 10 Excel Series is engineered to better address the lubrication demands of a new generation of high-pressure industrial and mobile equipment - helping you reduce power consumption and increase machine output surpassing even our standard-setting Mobil DTE 20 Series and Mobil DTE 10M Series hydraulic oils. A product of the latest in... Read More

Lubricants

Dry Film Lubricant is fortified with molybdenum disulfide.

March 10, 2010

With ability to withstand extreme pressures, temperatures up to 650°F, water, and chemicals, CRC Quick Dry Moly Lube fills pores of metal surfaces to provide dirt repelling barrier that protects surfaces from pressure and friction. Available in 16 oz aerosol can (part #03043), EPA regulatory compliant solution does not contain any known Ozone Depleting Chemicals. It can be applied on gaskets,... Read More

Lubricants

Minimum Quantity Metalworking Lubricant suits stamping applications.

March 2, 2010

Water-based Accu-Lube Synthetic II lubricant is formulated with non-chlorinated extreme pressure and boundary lubrication additives to produce high-quality parts in moderate-duty operations with ferrous and nonferrous metals. While safe for the environment, product offers corrosion protection and performs well in operations where high friction is generated. Accu-Lube Synthetic II is available in... Read More

Lubricants

New Neat Cupper Lubricant from Quaker Chemical Quickly Becoming Market Leader

March 1, 2010

CONSHOHOCKEN, Pa. - A new neat cupper lubricant from Quaker Chemical is quickly becoming recognized by global Can industry as one of the best products on the market, due to its high lubrication performance. Quaker Chemical has offered a neat cupper lubricant to the global Can market since early 2009. However, their new QUAKEROL® Q30LV(E) uses an in-house ester that was developed based on... Read More

Lubricants, Machinery & Machining Tools

Water-Soluble Coolants are safe for all metals.

February 25, 2010

Formulated with chlorinated and non-chlorinated EP additives, respectively, Rustlick PowerCool MaxLife and PowerCool MaxLife CF coolants provide biostability and performance for heavy-duty cutting and grinding applications. They can be used on ferrous/non-ferrous metals, aluminum, brass, bronze, and copper. Available in 5 or 55 gal containers, products suit wide range of low to heavy-duty... Read More

Lubricants, Machinery & Machining Tools

Water Soluble Metal Cutting Oil has no harmful additives.

February 24, 2010

Formulated with Extreme Pressure additive, CYCLE HD is suited for moderate to heavy-duty machining of ferrous and non-ferrous metals. Product resists bacteria, extending sump life and providing odor control. Fluid is prepared with small oil droplets that prevent separation of oil from water, which leads to stable emulsion. Low foaming and low misting, CYCLE HD offers optimal performance in... Read More

Lubricants

SENTRON(TM) LD 5000 Approved for Use in GE Jenbacher Type 2, 3, and 6 Engines

February 19, 2010

Mississauga, Ontario Canada - After accumulating more than 10,000 hours of service in each of two field trials, Petro-Canada Lubricants today announced that its SENTRON LD 5000 premium natural gas engine oil has been approved by GE Jenbacher for use in all of their Type 6 engines fuelled by natural gas. The field trials were conducted in GE Jenbacher J620 and J420 engines up to 20 bar used in CHP... Read More

Lubricants

Metalworking Fluid uses synthetic ester technology.

February 17, 2010

Optimized for high-tech ferrous metals including stainless steel and Inconel®, TRIM® C380 targets aerospace, medical, and electronics industries. Combination of synthetic ester technology and non-halogenated EP package produces high levels of lubricity at point-of-cut. Low-foam detergents keep process soils from redepositing on machines and parts. Low odor and low mist, C380 contains no... Read More

Lubricants

High-Speed Machining and High-Quality Metalworking Fluids ... The Perfect Pair

February 2, 2010

Metalworking fluid performance directly impacts Aluminum high-speed machining CONSHOHOCKEN, PA - Metalworking fluid manufacturers are watching as the high-speed machining (HSM) trend continues to grow in the Aluminum engine and transmission industry. As competition increases, engine and transmission manufacturers continue to turn to HSM for its gains in productivity, improvement in the machining... Read More

Green & Clean, Lubricants, Machinery & Machining Tools

Cutting Fluids come in concentrated form.

February 1, 2010

Providing tramp oil rejection and control of bacteria and mold, semi-synthetic Kool-ALL Ultra® extends sump life. Power-Cut Ultra® soluble oil has emulsifiers that mix with water and can handle alloy steels such as 300 series stainless steel. Featuring low foaming tendency, Synthetic Kleen-Kool Ultra® optimizes fines release and hard water tolerance, minimizing grinding swarf and... Read More

Adhesives & Sealants, Lubricants, Materials & Material Processing, Optics & Photonics, Vision Systems

Momentive to Showcase New Electronics Materials at Material Japan 2010

January 22, 2010

ALBANY, N.Y., January 19, 2010 - Momentive Performance Materials will be exhibiting a range of new advanced materials for use in microelectronics applications at Material Japan 2010, taking place at Tokyo Big Sight on January 20, 2010. At Booth East 26-24, experts from Momentive will feature a number of its latest technologies for the semiconductor, LED and flat panel display (FPD) industries,... Read More