Top Line Process Equipment Co.
Bradford, PA 16701
Nov 24, 2009 Top Line TE Series electric actuators are available in 24 Vac, 24 Vdc, and 115 Vac single-phase voltages. Featuring NEMA 4, 4X, and IP67 polyester powder-coated aluminum housing, they integrate 2 limit switches for operation and 2 auxiliary dry contact switches. Anticondensation space heater minimizes downtime. Units also include visual position indicator and captive cover bolts, while external manual override protects devices during power failure.

Tridak
Torrington, CT 06790
Nov 19, 2009 Designed for fluid dispensing, Model 340PS is suited for shot volumes from 0.004-0.180 mL, while Model 340PSL offers larger shot capability up to 1.200 mL. Both incorporate disposable fluid path from reservoir to dispense tip. Sequenced piston actuation dispenses consistent shot-to-shot volume regardless of material viscosity or viscosity fluctuation. Offered with polyurethane, flexible polyethylene, or Teflon® tubing, valves feature over-stroke adjustment to prevent premature tubing wear.

Parker Hannifin Plc
Barnstaple Devon EX31 1NP  United Kingdom
Nov 05, 2009 Stainless steel H-series helps improve reliability and conserve space in process and instrumentation applications involving viscous and contaminated media. It comes in 2 forms: discrete hand valve for controlling media flow, or integrated into monoflange-style manifold for safe double-block-and-bleed connection of instruments to process lines. Flow path size minimizes inclinations to blockages or related problems, and metal-to-metal seal offers bubble-tight shut-off.

PneuMagnetic, LLC
Quakertown, PA 18951
Nov 04, 2009 Converting most ASCO direct-acting IS and EX solenoid valves from electric to pneumatic operation, PneuMagnetic Actuators eliminate need for field wiring, conduit and junction boxes, flame arrestors, or barriers. Converted valves require only air pilot using flexible, small diameter pneumatic line.

Avery Dennison, Printer Systems
Philadelphia, PA 19111
Nov 04, 2009 Steam valve system provides hermetically-sealed protection against contaminants while accurately regulating cooking process of home-heated foods. Applied over pre-cut hole in flexible packaging or lidding film, valve opens at predetermined temperature and lets steam escape during cooking process by exposing structure's slitted or perforated baffle layer. Product also lets manufacturers specify how much steam leaves package during cooking as well as control pressure inside package.

AMOT Controls Corp.
Houston, TX 77064
Nov 04, 2009 Suited for underground mining or similar applications calling for Group 1 certification, Chalwyn SVX electronically operated air intake shutdown valve has non-sparking zinc alloy body and solenoid cover. Failsafe valve helps to prevent potential explosions from diesel engine ignition wherever there is combustible gas, vapor, or dust hazard. Designed for air intake diameters from 1½-8 in., butterfly valve can be flange or hose mounted.

GF Piping Systems
Tustin, CA 92780-7258
Nov 03, 2009 Type 567 Butterfly Valve features double eccentric design with off-center shaft that allows disc to completely disengage from disc seal, even when partially open, minimizing seal friction to extend service life and reduce maintenance. Industry-standard ISO flange mount facilitates electric or pneumatic actuation with most actuators. Built for chemical compatibility, valve also features bi-directional capability, pressure rating of 90 psi at 70°F, and hand wheel.

Innovative Pressure Technologies, Inc.
Erie, PA 16509
Nov 03, 2009 Subsea valves are available with T-handle for manual operation, paddle handle for ROV operation, or hydraulic actuator for remote operation, and with port sizes from ¼-2 in. They feature floating ball design for operation at 3,000-6,000 psi pressure, and trunnion ball design for operation at up to 15,000 psi. Valve seals feature PEEK seats for resistance to chemical, heat and wear, and NBR Buna-N o-rings make them suitable for operation in temperatures from -35 to 250°F.

Gems Sensors Inc.
Plainville, CT 06062
Nov 03, 2009 Constructed from chemically inert materials such as PTFE, ETFE, EPDM, FKM, FFKM, PEEK, PPS, and PSU, K Series is suited for applications requiring chemical resistance and/or sample purity. Modular, direct-acting, round-bodied solenoid valves include KS Series 2-way valves with MOPD of 20 psig; KM/KL Series 2-way and 3-way directional valves with MOPDs of 30 psig; and KV/KW Series 2-way and 3-way directional models with MOPDs as high as 209 psig.

Tideflex Technologies
Carnegie, PA 15106
Oct 29, 2009 Constructed entirely of rubber, with enhanced sealing to improve headloss across valve, TF-1 Curved Bill Tideflex® Check Valve is immune to rust, corrosion, and weathering. It can also handle long-term water weight and maintain structural integrity. Vertical angle of spine enables valve to withstand cantilever effect when water is flowing through it.

PneuMagnetic, LLC
Quakertown, PA 18951
Oct 23, 2009 Featuring self-contained, pneumatic magnetic design, PneuMagnetic Solenoid Valve Actuator can be used as drop-in replacement for OEM coil on direct acting solenoid valves, and provides same on/off magnetic field as original coil. No field wiring, conduit, or intrinsically safe barriers and no electricity at valve are required. Actuator is fully compatible with any original hermetically sealed valve.

Asahi/America
Malden, MA 02148
Oct 15, 2009 Available in 1¼ x 1¼ in. and 1½ x 1½ in. sizes, Type-343 Zero Dead Leg 3-Way Valves come in 45+ configurations for Purad PVDF, PolyPure PP-natural, and PP-Pure pigmented PP. Pigmented and natural polypropylene T-343 valves are available in 12 configurations each, which include ¾ x ¾ in. and ¾ x ½ in. sizes, and Purad PVDF valves operate up to 285°F. Valves are suited for use with aggressive chemical as well as high-purity applications.

Tridak
Torrington, CT 06790
Oct 09, 2009 Tridak Model 785 poppet valve is designed to dispense adhesives, silicones, greases, and filled materials. Stroke adjustment and control offer precise adjustment of fluid deposit volume and flow. Dispensed material is shut-off cleanly at end of each cycle.

AKO Armaturen & Separations GmbH
Trebur-Astheim   Germany
Oct 02, 2009 Available in nominal diameters DN040-DN150, VA series is made with flange connection conforming to DIN EN 1092 (PN10/16) as standard. Body and flanges of lightweight valve are made in stainless steel AISI 1.4404 and are electro-polished. Valve design enables sleeve to be changed quickly without need for special tools and adhesives.

Hayward Industrial Products Inc., Hayward Flow Control Systems
Clemmons, NC 27012
Sep 24, 2009 Designed for ball/butterfly valves up to 24 in., EPM Series Reversing Actuators provide torque outputs from 300-13,500 lb-in., and are available with positioners for on/off or modulating requirements. Reversing Spring Return Electric Actuators, EPS Series, suit valves up to 8 in. and offer torque from 450-2,300 lb-in., while EPL Series Linear Drive Actuators provide up to 4,400 lb down/up force and up to 4 in. stem travel for diaphragm valves. All 3 actuators are corrosion-resistant.

Tridak
Torrington, CT 06790
Sep 18, 2009 Capable of handling high viscosity fluids, Model 780 is suited for fluid packaging operations, including filling vials, bottles, and other specialty containers, and can be integrated into robotics and automated production processes. Valve offers adjustable material suck-back and flow control to maintain precise accuracy of volume dispensed. Featuring hard-coated aluminum components and Teflon® seals as standard, unit is also available in stainless steel and Teflon® construction.

Parker Hannifin Corp.
Oxford, MI 48371
Sep 16, 2009 Designed to facilitate building of compact pneumatic systems, centralized Isys Micro lets users choose from various installation configurations, communications protocols, and override systems. Plug-in valve island features metal sub base onto which up to 4 valves can be fitted, and back-to-back design incorporates 4 solenoid valves in each 42 mm wide slice, producing up to 8 functions per module. Valves also feature Wear Compensating Seal Technology, which can achieve 50 million cycles.

Abanaki Corp., Oil Skimmer Div.
Chagrin Falls, OH 44023
Sep 04, 2009 Used for metering dry granular materials in manufacturing processes, Rhino H Rotary Airlock Valve is available with 4, 6, or 8 vanes, which are always sealing, preserving negative or positive pressure under which rotary airlocks operate. Standard sizes are 8, 10, 12, and 15 in. with capacities ranging from 0.19-1.75 cu-ft/revolution. Featuring welded carbon or stainless steel body, valve is suited for processes that handle cement, sugar, grains, plastic resins, and lime.

Tridak
Torrington, CT 06790
Aug 21, 2009 Utilizing sequenced piston actuation, positive-displacement Models 340PS and 340PSL dispense consistent shot-to-shot volume regardless of material viscosity or viscosity fluctuation. Model 340PS is suited for shot volumes from 0.004-0.180 mL, while Model 340PSL provides shot sizes up to 1,200 mL. Both are available with polyurethane, flexible polyethylene, or Teflon® tubing. Over-stroke adjustment prevents premature tubing wear, allowing millions of cycles before tubing replacement.

SPX Process Equipment
Delavan, WI 53115
Aug 21, 2009 Machined from solid bar construction, W75 RS Series provides safe separation of dissimilar products within same valve body when processing milk and milk products meeting requirements of Pasteurized Milk Ordinance. Crack resistant, transparent control top houses proximity switches with optional internal solenoid valves. Featuring standard pressure rating of 150 psi, valves are available with 1½, 2, 2½, 3, 4, and 6 in. tube OD sizes.