Bosch Rexroth Corp., Industrial Hydraulics Div.
Bethlehem, PA 18017
Jun 17, 2008 With 6,500 bar nominal pressure and 9 nominal parameters that counteract reduced speed of diesel engine, A4VG variable pump with swashplate design lowers emissions for travel drives used in mobile equipment. Pump case provides manufacturers with ways to include sensors for monitoring swivel angle, high pressure, and rotational speed. Bowl-shaped design avoids high-pressure transitions at sealing points, while high-pressure ports help optimize arrangement of hydraulic lines.

HASCO Hasenclever GmbH + Co KG
Ludenscheid D-58513  Germany
Jun 13, 2008 Available with 2 standard size drive units, Model Z10710 can be combined with all Techni Shot and Valve Shot nozzles, allowing runner diameters and nozzle lengths up to 300 mm to be optimized. Activated pneumatically or hydraulically, valve can be used as single nozzle centrally mounted in middle of mold or as drive unit mounted between manifold and nozzle. Valve pin stroke can be varied with both drive solutions from 2-17 mm.

Clippard Instrument Laboratory, Inc.
Cincinnati, OH 45239
Jun 12, 2008 At just over 1 in. tall and less than ¾ in. diameter, EM Valve is available in 2- and 3-way configurations with flow rates from 0.55-0.75 scfm. Unit is housed in miniature body and incorporates wire leads out of top, allowing body rotation for close-center mounting. Valve is suited for air and/or gas control, pilot control, and any application where space is limited.

Sta-Warm Electric Co.
Ravenna, OH 44266
Jun 12, 2008 With heating element wrapped around outer surface, Heated Transfer Pump provides uniform heat to inner portion of pump to prevent cooling of temperature-sensitive materials conveyed through gravity fed transfer lines. Unit has max operating temperature of 375°F and can transfer tar, wax, glue, and potting compounds. Pumps operate in 120, 240, or 480 V systems, have output of 1-50 gpm at 100 psi max, and are available in bronze, cast iron, or stainless steel.

EXAIR Corporation
Cincinnati, OH 45249-1621
Jun 10, 2008 Utilizing SS 2-way pump that is suited for use with most non-flammable liquids, Mini Reversible Drum Vac System can vacuum coolant, hydraulic oils, spills, sludge, tramp oil, and waste water; then pump it back out for disposal, storage, or reclamation. Compressed air powered unit has no moving parts such as motors or impellers to clog, freeze up, or wear out. With air consumption of 19 scfm at 80 psig, it features automatic safety shut-off valve to prevent overfilling.

Sigma-Aldrich Co., Inc.
Milwaukee, WI 53209
Jun 10, 2008 Supporting up to 13 kg of precursor, Model OM700 offers controllable dosimetry of highly sensitive organometallic precursors, such as TMG, TMA, and TEG. Flux stability covers operating temperatures from -10 to +30°C and ensures that all processes run at peak efficiency. Independent heating jacket and thermal control system enable increased volume to accommodate over 9 liters of metal alkyl, while still maintaining strict temperature and operational controls.

KNF Neuberger, Inc.
Trenton, NJ 08691-1810
Jun 09, 2008 Featuring explosion-proof AC motors, KNF corrosion-resistant pumps are equipped for gas and liquid handling in potentially hazardous locations. Offering compliance with Class 1, Division 1, Groups C & D, and ATEX hazardous locations, they can achieve flows up to 7.8 scfm and vacuums up to 29.86 in. Hg, depending on model. They provide oil-free operation, run without wear-prone sliding seals, include quality precision ball bearings, and come in 3 head configurations.

Haight Pump, Div. Of Baker Manufacturing Company
Evansville, WI 53536
Jun 06, 2008 Employing minimal parts to promote extended MTBF, DIU series is built with ductile iron housings, steel shaft and pinion gears, and iron rotor with multiple bearing materials. Shaft sealing includes packing seals, lips seals, and multiple mechanical seal types, with elastomers to suit. Along with built-in shaft seal flexibility, pumps feature direct drive speeds to 1,800 rpm and close coupled design that eliminates misalignment and related failures.

Finish Thompson, Inc.
Erie, PA 16501
Jun 03, 2008 Molded from corrosion-resistant GF Polypropylene or CF PVDF, DB22 models offer broad hydraulic coverage with working pressure capabilities up to 90 psi, max flow rates reaching 220 gpm, and discharge heads to 200 ft. Run-dry capability, with carbon bushing, minimizes repairs and production downtime, and ductile iron motor adapter mounts to NEMA or IEC frame motors. Models are available with open/closed impellers and NPT/BSP threaded, flanged, or union connections.

Matco-Norca, Inc.
Brewster, NY 10509
May 30, 2008 Available in sizes from ¼-1¼ in., Model 759TS offers working pressures of 50 psi WSP and 600 psi non-shock WOG. Valve is constructed with full port, forged brass, 2-piece body; Teflon seats; blow-out proof stem; and chrome-plated solid brass ball. Conforming to MSS-SP-110 and ANSI B2.1 for threaded ends, Model 759TS is suited for underground and close quarter commercial and light industrial applications with steam, water, oil, gas, or air.

Peter Paul Electronics Co., Inc.
New Britain, CT 06050
May 30, 2008 Available with AC or DC power and operating pressures from 0-1,000 psi, 1.6 in. dia x 2.75 in. high Series 20 valves and 1 in. dia x 2.4 in. high Series 50 valves suit applications where weight is of concern. Products are offered with 2- and 3-way, NO and NC operation with 0 to +104°F operating temperature range and seals of BUNA, FKM, EPDM, Neoprene®, or TEFLON®. While Series 20 is offered in 1/8 and ¼ in. NPT, Series 50 is offered in 1/8 in. NPT only.

Omega Engineering, Inc.
Stamford, CT 06907
May 29, 2008 Utilized in start-up and shutdown of air line equipment, Norgren Excelon® P72F-2AC-PFA series of smooth start/exhaust valves are streamlined to block inlet air and exhaust downstream air when pilot signal is removed or optional manual lockout slide is closed. They offer optional padlocking of manual slide in closed position, and can be used in any application that employs air-operated devices. CE compliant units are suited for automotive, electronic assembly, and test system industries.

Bosch Rexroth Corp., Industrial Hydraulics Div.
Bethlehem, PA 18017
May 27, 2008 Suited for assembly of compact power packs, B Series pumps feature 7 cc per revolution, while G Series pumps have displacement of up to 63 cc per revolution for applications in upper power classes. U and T Series pumps offer low noise emissions and vibrations, and satisfy demands for all displacements between 4 and 63 cc per revolution. Individual/combined multiple external gear pumps are suited for machines with operating pressure of 4,000 psi and cover speed range up to 6,000 rpm.

Bosch Rexroth Corp., Industrial Hydraulics Div.
Bethlehem, PA 18017
May 23, 2008 Designed for working hydraulics in open circuits, Rexroth A10VO Series 53 medium-duty axial piston variable pump (250/315 bar) features hydraulic-mechanical power control or electro-proportional differential pressure control. Power controller prevents overloading of combustion engine, while electro-proportional swivel angle adjustment allows precise flow control and electronic limit load control.

Bosch Rexroth Corp., Industrial Hydraulics Div.
Bethlehem, PA 18017
May 23, 2008 Available in sizes of 71-140 and with pressure of 4,000/5,000 psi, Series 32 A10VO has housing design that reduces noise levels by up to 3 dB, while offering resistance to suction-pressure dips and housing-pressure peaks. It includes improved controllers for upper medium-duty range and safeguard feature that protects against excessively high pressure settings. Current controller generation integrates sealing concept for leak protection and resistance to dirt and contamination.

Dwyer Instruments, Inc.
Michigan City, IN 46361 0373
May 16, 2008 Designed for medium-duty industrial and commercial applications, Series TBV Plastic Ball Valves feature true union design, allowing for removal from piping system without breaking down connections. Units have all plastic construction and do not rust or corrode. They are contained in PVC plastic bodies with EPDM seals and are available in 2½-4 in. sizes, featuring full-port design.

Parker Hannifin Corp., Instrumentation Valve Div.
Jacksonville, AL 36265-9681
May 13, 2008 Suited for applications up to 20,000 psi, 20K Hi-Pro Ball Valve and 20K H-Series Needle Valve are fabricated from 316 SS and offered in NACE-compliant and Heat Code Traceable versions. Ball valve features 2-piece construction, minimizing potential leak paths. Unit is fully bi-directional and actuated by 90° turn. Offering multi-turn action, needle valve operates from -65 to +392°F. Both instrumentation valves are available with Phastite® tube connector ends, which minimize assembly time.

Clippard Instrument Laboratory, Inc.
Cincinnati, OH 45239
May 09, 2008 Electronic Oxygen Clean series is available with single- and multi-station manifolds, which offer single- or double-sided mounting in oxygen-compatible electroless nickel-plated brass material and feature 1/8 in. NPT input ports as well as No. 10-32 outlets. Consuming 0.67 W, pneumatic Oxygen series has response time of 5-10 msec and ratings of 6, 12, or 24 Vdc. Available in 1-12 station versions, manifolds facilitate grouping of valves, fittings, or other pneumatic components.

BEX, Inc.
Livonia, MI 48150 5031
May 08, 2008 Suited for washing and rinsing applications, all-Teflon® rotating nozzle provides 360º spray coverage in compact assembly. A total of 5 spray patterns are available in 4 different pipe sizes for use at operating pressures up to 100 psi. Snap-on cap holds nozzle ball securely in place without threads or fasteners. Effective in containers up to 10 ft in dia, unit features self-cleaning and self-lubricating bearing mechanism.

Lasso Technik Inc.
basel ch-4059  Switzerland
May 07, 2008 Offering water hammer relief and tight non-return shut-off for existing flanged piping systems, Stop-Silent® AS 54 features retrofit design for direct implementation without structural or housing alterations. Solid-state valve is comprised of stainless steel perforated cone and rubber membrane. Suitable for use in water, oil, acids, and brines, valve has -20 up to +180°C temperature range and 232 psi max operating pressure. It handles fluids up to 10 fps and gases up to 50 fps.