Red Valve Company Inc
Carnegie PA 15106
Dec 19, 2007 Suited for power and mining industries, Series DX provides drop tight shut-off in both directions. When valve opens, reinforced elastomer sleeves seal against each other and provide 100% full port opening, minimizing turbulence and wear. Seats isolate and protect all metal parts of valve from coming in contact with process. Each time valve strokes, it discharges small amount of slurry, keeping gate path and seat area clear of entrapped particulates.

Clippard Instrument Laboratory, Inc.
Cincinnati, OH 45239
Dec 14, 2007 Constructed of aluminum, in-line manifolds are designed with bottom T-slot that allows for accelerated and secure installation. Products are available in 4-, 6-, 8- or 10-station versions. Design provides access for grouping valves, fittings, or other pneumatic components.

NozzTeq, Inc.
Dunedin, FL 34698
Dec 13, 2007 Used in combination with 2 trucks at either end of pipes 15 in. and larger, Orca(TM) Dual Operating Sewer Nozzle is specified with 4 jets for one end of hose and 4 for other end. It uses manifold and conduit system so that each jet has individual tube to carry water, resulting in minimized turbulence in sewer nozzle head as well as optimized stream distance. Nozzle features stainless steal construction throughout and allows companies to utilize current trucks.

Asahi/America
Malden, MA 02148
Dec 12, 2007 Offered in sizes from ½-2 in., 3-way Type 23 Multiport ball valve is available with Cross Port Ball. Molded flow corridor inside ball cavity allows for separate L-port flow pattern in valve that also has Straight Through flow pattern. Able to be configured to allow for L-Port, T-Port, and Straight Through flow patterns in one valve body, design lets operators switch between all 3 options by rotating valve handle.

Sauer-Danfoss
Ames, IA 50010
Dec 11, 2007 Models H1 45/53 cc and 78 cc single pumps utilize electro-hydraulic servo piston assembly that controls rate and direction of hydraulic flow. PLUS+1(TM)-Compliant, closed-circuit variable displacement axial piston pumps include tandem Control Cut Off (CCO) circuit that disables both pump controls in absence of proper signal to override solenoid; Integral Speed Limitation (ISL) circuit that prevents engine overspeed; and pressure filtration with filter bypass sensor and switch.

BOC Edwards
Wilmington, MA 01887
Dec 11, 2007 Rated at 2,200 L/sec, iXA(TM) series of turbomolecular vacuum pumps exhaust process gases from physical vapor deposition, etching, chemical vapor deposition, or ion implant equipment in semiconductor, flat panel display, solar energy, and industrial glass coating applications. Pump includes 5-axis magnetic bearing system and RS232/485 (Profibus) serial communication interfaces. Unit features power supply and control modules that can be mounted in various configurations directly on pump.

Flomatic Valves Div., The Danfoss Group
Glens Falls, NY 12801
Dec 10, 2007 Enviro check valves are offered with optional 316 stainless steel internal poppet system, available in sizes from 1-4 in., that replaces standard bronze or plastic WCR(TM) poppet. Unleaded bronze body products are maintenance-free and can be installed in any position. All components have correction-free construction, capable of withstanding repeated normal operation without failure or excessive wear. Suited for hot water applications, valves operate at max water temperature of 400°F.

Baxa Corp.
Englewood, CO 80112
Dec 07, 2007 Offering consistent liquid delivery regardless of source container, final container, tubing diameter, or fluid viscosity, Repeater(TM) Pump II accurately delivers pharmacy solutions into various containers using fixed-volume (positive displacement) pumping. Other features include snap-and-go tubeset installation, touchscreen UI with icons and colored graphics, as well as memory field recall capability that aids in start and repeat of common applications.

Versa-Matic Pump Inc., A Unit Of IDEX Corp.
Export, PA 15632-8969
Dec 06, 2007 With port size of 0.75 in. and leak-free, bolted construction, E7 series pumps are suited for use in lubrication, tire filling, adhesive dispensing, OEM systems, and other industrial applications. Elima-Matic® air valve system ensures non-stalling, non-icing, lube-free operation, while shoe-valve design prevents blow-by when pump is online but not in use. Series can be grounded and offers models with metallic or non-metallic air sections.

Jaeco Fluid Systems, Inc.
Exton, PA 19341
Dec 04, 2007 JaecoFram 1(TM) pumps feature heavy-duty, continuously lubricated gear reduction system as well as separate chambers for hydraulic fluid and gear lubricant. Hydraulic actuation of diaphragm minimizes fatigue and units also feature built-in hydraulic relief valve. Devices offer capacities from 0.8-56 gph at pressures up to 1,200 psi with accuracy of 0.5% at steady state. Capacity is manually adjustable while pump is running or idle over turn-down ratio of 10:1.

Manufacturing Productivity Systems, Inc.
Granby, CT 06095
Dec 04, 2007 Suited for turning, milling, and grinding applications, MP-B series high-pressure coolant pumps use Hydra-Cell® diaphragm technology. Rugged, fixed, or variable volume pumps are built to handle abrasive particles found in machine tool coolant. In lathe and mill applications, pumps remove chips from even deep and blind holes, and also reduce cyclic cooling in milling applications. Units keep wheels free of swarf build-up and optimally cooled in grinding application.

Flomatic Valves Div., The Danfoss Group
Glens Falls, NY 12801
Dec 03, 2007 Designed for vertical or horizontal applications, 12 in. Model 80DIX check valve (NPT female connection) features double guided poppet with ductile iron body. Other elements of construction include anti-poppet spin lugs with stainless steel fasteners. Valve is designed for larger submersible pumps for well water, irrigation public and pumps booster systems. It can be installed with optional break off plug for draining riser pipe.

EXAIR Corporation
Cincinnati, OH 45249-1621
Nov 30, 2007 Featuring cast aluminum body and ergonomic composite rubber grip, Heavy Duty Safety Air Gun safely removes chips, dust, and other contaminants from products, machinery, and work surfaces. Unit uses 3/8 NPT compressed air inlet to maximize airflow available to Super Air Nozzle. Airflow cannot be blocked, which complies with OSHA standards. Providing reach for areas not easily accessible, aluminum extension pipes are available in lengths up to 72 in.

Norwalk Equipment Corp.
Norwalk, OH 44857
Nov 29, 2007 Designed for electric hot water heaters only, Sediment Suction Kit has 2 nozzles with adapter that fits both. Nozzles are inserted into bottom heater element port, while shop vacuum is hooked up to adapter to suck out sediment. Kit cleans up to 24 in. diameter tanks.

Humphrey Products
Kalamazoo, MI 49003
Nov 19, 2007 Designed for pneumatic applications, 310/410 Series 1/8 in. ported 3- and 4-way direct acting solenoid valves feature set screw and pushrod assembly designed as single threaded pushrod to eliminate opportunity for wear between those 2 parts. Short-stroke balanced poppet design at requires no lubrication and is tolerant of impurities in air system. While 310 Series has 0.12 CV and 410 Series has 0.14 CV, both are rated for air and inert gas from vacuum at 28 in. Hg to 125 psig.

Jet Edge
St. Michael, MN 55376
Nov 16, 2007 Suited for use in cutting applications, 100 hp X-Stream xP90-100 waterjet intensifier pump is capable of producing pressures in excess of 90,000 psi. It supports 75,000 psi continuous operating pressure, optimizing water, energy, and abrasive consumption. Able to produce flow rates of 1.45 gpm, product supports up to .017 in. orifice. Fittings and tubing are rated for 100,000 psi.

Lutz-JESCO America Corp.
Rochester, NY 14624
Nov 16, 2007 Employing microprocessor that optimizes power consumption based on required back pressure, MAGDOS LT features chemical-resistant materials and hermetically sealed design suited for use with toxic and aggressive media. Manual speed control, as well as manual and step-less stroke length adjustment with 5:1 turndown ratio, promote application flexibility. Solenoid-driven diaphragm dosing pump has double-ball valves and capacity from 0.03-4.49 gph, with pressures up to 232 psig.

ProMinent Fluid Controls, Inc.
Pittsburgh, PA 15275
Nov 12, 2007 With ability to automatically degas pump head, Delta precision pump is suited for dosing fluids such as sodium hypochlorite. It offers continuous dosing of volumes as small as 5 ml/hr. Unit comes with relay module, solenoid valve, and optoGuard injection control system that detects air/gases locked in liquid end of pump. Models 2508 and 1608 offer capacities up to 7.5 and 7.8 l/hr at maximum backpressure of 25 and 16 bar, respectively.

BEX, Inc.
Livonia, MI 48150 5031
Nov 09, 2007 Available with tips that provide flat V, solid stream, and full cone spray patterns, Air Atomizing Spray Nozzle uses 1 port for gas to atomize sprayed liquid and another for gas that drives cylinder, preventing contamination from cylinder lubricants. Unit can spray from ½-70 gal of fluid per hour. It can spray atomized liquid or liquid itself, continuously or in pulses. Each nozzle can be changed by itself, without interfering with operation of other nozzles.

KD Scientific Inc.
Holliston, MA 01746
Nov 09, 2007 Designed to operate unattended, Model KDS 330 emulsifies Eleutherosides and other components in adjunct composition. Unit can create viscous fluids/suspensions by forcing fluids back and forth through micro-emulsifying needle. With menu-driven program, user enters syringe diameter and flow rate, and selects dispense volume. When in emulsion mode, pump cycles from infusion to withdrawal continuously, automatically infusing preset volume and withdrawing preset volume.