Meissner Filtration Products, Inc.    Camarillo, CA 93012 8760
Jun 14, 2012 Designed with flexibility to incorporate UltraCap® H.D. filter capsules from 10-50 in., UltraSnap(TM) secures multiple pre and final filters into single-use filtration system for plug-and play-use. Assembly eliminates change-out of filters from stainless steel housings and associated cleaning and reassembly of filter/housing unit. Optimized for clarification through sterile filtration applications, configurable system effectively makes scale of single-use filters unlimited.

Binder-USA, LP    Camarillo, CA 93012
Jun 14, 2012 Suited for signal/power applications requiring solderless assembly, Series 713 and 763 have screw terminations that enable wires to be attached in field without special tooling or soldering. Connectors are offered with 4, 5, and 8 gold-plated contacts in male and female versions, and screw terminations accept 16 AWG max wire gauge and transmit currents up to 8 A. To determine direction of angled cable outlet of mating connector, 4- and 5-pin connectors can be positioned in 4 x 90° steps.

Harvard Apparatus, Inc.    Holliston, MA 01746 1371
Jun 13, 2012 Coupling to virtually any pressure transducer/amplifier with 0-10 V output, PHD ULTRA(TM) CP Syringe Pump delivers fluids with applied force up to 1,000 lb with less than ±2% pressure accuracy. Unit infuses fluids under constant pressure by automatically adjusting flow rate. Typical applications include organ perfusion studies requiring constant physiological conditions, ocular injections and perfusions, and constant pressure microfluidic mixing.

Humphrey Products    Kalamazoo, MI 49003
Jun 12, 2012 Measuring 15 mm with 0.25 Cv flow, 3-port Model 153 provides stable performance regardless of media fluctuations, mild contamination, or porting choices. Balanced poppet design means all internal forces generated by pressurized media are effectively neutralized. Applicable for full pressure range to 125 psi, including vacuum, direct-acting valve is designed and tested for low leak rates of 4 ccm max at 100 psi. Models are available in 2-way or 3-way and normally closed or normally open.

Hayward Industrial Products Inc., Hayward Flow Control Systems    Clemmons, NC 27012
Jun 11, 2012 Constructed with 1-piece injection molded platinum GF-PP body, FLV Series offers flow capacities of 100 gpm in 1 ¼-2 in. sizes and 150 gpm for sizes 2 ½-4 in. Units are available with socket, threaded, and flanged connections as well as optional drill and tap NPT ports. Providing pressure rating of 150 psi and service temperature up to 240°F, filters feature hand removable cover with liquid displacing dome, hinged basket design, drain port on bottom, and integral mounting base.

Murata Electronics North America, Inc.    Smyrna, GA 30080
Jun 11, 2012 Utilizing piezoelectric technology, MZB1001 microblower provides up to 0.8 Lpm airflow and nearly 1.5 kPa air pressure while consuming 0.2 W typ. Piezoelectric diaphragm, which vibrates up and down when sine wave voltage is applied, is optimized for operation above nominal audible range. Vibrations force air into microblower and out through nozzle on top of device. Used as air pump, product helps shorten duration of high-pressure airflow applications.

FasTest, Inc.    Roseville, MN 55113-1317
Jun 07, 2012 Intended for non-threaded openings, NuJaws® JNL2 Series seals straight bore, step bore, smooth, or cast surfaces and accommodates internal pipe diameters from 1.000-1.625 in. Lever action makes grip-and-seal connections from vacuum to 750 psi, delivering solution for bubble pressure decay and mass spectrometer testing. Leak-tight to 10^-7 cc/sec, connectors include pressure-assisted gripping collets to prevent accidental disconnect under pressure.

Vanguard Products Corp.    Danbury, CT 06810
Jun 06, 2012 Designed to resist high temperatures, Silicone Formulations come in silicone tubing for fluid conveyance, custom silicone extrusions for gaskets and seals, and molded silicone products. Compounds are listed to NSF-51, Food Equipment Materials and offer resistance to animal fats and steam exposure, making them suitable for commercial cooking equipment and food holding apparatuses.

Camfil Farr Air Pollution Control    Jonesboro, AR 72401
Jun 04, 2012 Integrated on top of Gold Series® cartridge dust collectors, ASHRAE-grade Safety Monitoring Filters prevent collected dust from re-entering workspace in event of leak in dust collector's primary filtering system. Each after-filter module incorporates 2 Riga-Flo® filters rated at 95% ASHRAE efficiency and capable of handling 2,650 cfm of air/filter. By preventing flames from recirculating into workspace, units also qualify as flame arresters as outlined in NFPA Performance-based provisions.

Industrial Magnetics, Inc.    Boyne City, MI 49712
Jun 04, 2012 Engineered with Rare Earth magnets, Transporter® LP Tooling transfers metal blanks, stampings, and parts in automated station-to-station, press-to-press transfer, and robotic pick-and-place applications. Magnets directly replace vacuum cups with minor tooling adjustments and can be installed to existing air connections on tooling booms or robotic face plates. Seven different products in 3 in. diameter Transporter LP line are available with 3/8 BSPP fitting.

Heyco Products    Toms River, NJ 08753
Jun 01, 2012 Heyco®-Tite Hybrid Liquid Tight Cordgrips enable different diameters of cable to be inserted in same gland. Moveable and segmented nylon fingers provide large clamping and sealing areas and compress around gland and wire when tightened using Cordgrip's compression nut to provide torsion-proof seal. Nickel-plated brass enclosure provides corrosion resistance and durability, while molded TPE gland protects flexible cables. Sizes are available for flexible cord diameters from .04-2.17 in.

Ross Controls    Troy, MI 48083
Jun 01, 2012 Meeting all applicable safety standards, Modular L-O-X® manual lockout valve - available in ¼, 3/8, ½, and ¾ port sizes - is lockable only in Off position; has full-flow threaded exhaust port; and features detented, positive push/pull operation. L-O-X® energy isolation function is also standard, and pressure sensing port is also provided for optional installation of popup indicator for pressure release verification. Modular L-O-X® with EEZ-ON® operation provides soft start function.

Gates Corporation    Denver, CO 80202
May 31, 2012 POWERCLEAN(TM) Flush Tool uses patented pulsating technology, clean water, and compressed air to scrub deeply into cooling system corners and crevices, dislodging more debris and accumulated sludge than garden hose or evacuation flush. Flushing increases cooling efficiency, produces more heat for winter driving, and lengthens water pump life, reducing warranty claims. Tool is designed to flush radiators, engine blocks, and heater cores.

C.I.Agent Solutions®    Louisville, KY 40299
May 31, 2012 Hydrocarbon flow filters (HFF) are capable of filtering up to 31.2 gpm and use non-woven geotextile fabric in conjunction with food-grade polymers. As water flows through HFF, hydrocarbons are captured and turned into rubber-like solid. Multiple sizes are available up to 24 in. long with 2-8 in. NPT diameters. Applications include storm drain inserts, cooling towers, electrical substations, secondary containment vaults and retention pond out-flows.

The Pump Shop, Inc.    West Chester, PA 19380
May 30, 2012 MP Pumps' High Output Self-Priming Pump, HHLF-HO, is available close coupled to NEMA C face electric motors, pedestal mounted, engine driven, or hydraulic driven. Engine driven models can couple with gasoline and diesel engines with 1 in. keyed drive shafts. Size of impeller and matching volute, both of which can fit into existing housings, promote performance. Along with Total Dynamic Head of 250 ft, pumps feature O-Ring on discharge port for increased sealing at elevated pressures.

Novatec, Inc.    Baltimore, MD 21225
May 29, 2012 Specifically designed for processing small quantities of material up to 5 lb/hr, Model NDM-5 utilizes compressed air and proprietary membrane, instead of dusty desiccant beads, to draw moisture out of polymers. Materials can be changed by removing integral glass hopper and replacing it with spare hopper containing another material. To operate, user turns dryer on and sets temperature on microprocessor control, which is equipped with 12 ft long pendant for remote mounting.

Flexaust    Warsaw, IN 46580
May 25, 2012 Providing chemical resistance and operating at temperatures up to 600°F, Flex-Lok® TCF is suited for handling harsh, wet fumes. Teflon®-coated fabric hose features double-ply construction with silver heat-resistant fiberglass liner, which is mechanically crimped in continuous process. Sealed exterior prevents escape of dangerous fumes. Offered in 4-20 ID sizes and 25 ft lengths, hose is available with optional non-marking thermoplastic rubber clip cover to protect helix.

BETE Limited    East Sussex East Su BN8 4HZ  United Kingdom
May 25, 2012 Designed for BETE flexible back pack fire extinguishers, adapter screws onto normal nozzle end of pump action sprayer, converting it to male connector that will fit standard quick-release, female hose connector. Adapter provides alternative to stirrup pumps and traditional hose reel adapters used for chimney fires, minimizing mess and potential for water damage.

Hayward Industrial Products Inc., Hayward Flow Control Systems    Clemmons, NC 27012
May 22, 2012 Available in sizes from ½-2 in., GF-PP TB Series feature full port design, with true union threaded or flanged end connections, reversible seats, adjustable seat retainer, and double O-Ring stem seals. Units have max pressure rating of 250 psi, 150 psi with threaded or flanged ends, and max service temperature of 240°F. Providing impact resistance, platinum glass filled polypropylene material is suited for chemical services, abrasive applications, and water distribution.

Hayward Industrial Products Inc., Hayward Flow Control Systems    Clemmons, NC 27012
May 21, 2012 T-Series Webster thermoplastic pumps feature single, non-coupled motor/impeller shaft with proprietary PTFE shaft seal design. Vertical seal-less immersible pumps are available from 1/3 to 1½ HP with standard and wash-down motors and as 115/230 V and 208-230/460 V models. Features include CPVC pump head and impeller, 303 SS shaft material and extended shaft sleeve. Applications include chemical processing and transfer, metal plating, water treatment, and mining.