Kennametal Inc., Advanced Materials Div.
Latrobe, PA 15650-0231
Jul 18, 2002 Made with ceramic grade Kyon 2100, cutters work at speeds of 3000 sfm to rough mill nickel, cobalt, and iron based heat resistant alloys. Cutters and inserts also machine Waspalloy, Haynes 25, Inconel 718, Stellite and similar materials at cutting speeds of 2000 to 4500 sfm and feed rates of 0.002 to 0.005 ipt. Also available are KC9110 and KC9125 inserts, both with 3 coating layers: TiCN, fine-grain Al203, and thin layer of TiCN and TiN.

Sandvik Coromant Co.
Fair Lawn, NJ 07410
Jul 17, 2002 CoroMill Century facemill is available in 1.5 to 6.0 in. dia and is capable of 40,000 rpm. It uses carbide or polycrystalline diamond inserts and micro-adjustable mating pockets. CoroMill 390 long-edge facemill is available in 2 to 8 in. dia and uses 18 mm long inserts for deep cuts in high-temperature alloys. CoroTurn family consists of extra-sharp, high positive rake, V-style inserts for smooth shallow-depth cuts. R-840 Delta C drill is available in 3 to 20 mm dia and uses 1220 fine-grained carbide grade with multi-layered coating.

Valenite, Inc.
Madison Heights, MI 48071 9636
Jul 08, 2002 New products include wiper geometry PVD milling and turning inserts; M750 Milling System for malleable and cast irons; SV209 and VC949 coated carbide grades for turning titanium, titanium alloys, and nickel and cobalt based alloys; and APET high shear PCVD coated TPC25 carbide inserts for stainless and high temperature alloys. PVD coated SpectraTurnâ„¢ and SpecraMillâ„¢ inserts are coated with TiAlN or AlTiN for edge integrity and wear properties.

Valenite, Inc.
Madison Heights, MI 48071 9636
Jun 18, 2002 Carbide cutting tool inserts handle high temperature alloys. SV209 has micro-grain carbide substrate with multi-layer CVD coating, while VC949 has aluminum titanium nitride PVD coating over micro-grain carbide substrate. SV209 can turn chrome cobalt alloys, inconels, hastelloys, stellites, and stainless steels. VC949 can turn titanium and titanium alloys. Both grades are available in LM chipbreaker design that allows for wide application range.

Aloris Tool Technology Co., Inc.
Clifton, NJ 07015 1529
Jun 12, 2002 Inserts are designed for use with ALORIS/YESTOOL line of Quick Tip Indexable Single Carbide Insert Drills. Insert life is doubled in 300 series stainless steel applications at rates of 160 sfm. Inserts are also recommended for use in Titatnium and Inconel. Sizes range from 8.0 to 50.8 mm in .1 mm increments. Drill bodies are available in flute lengths of 3x, 5x, and 7x length to diameter, and with English or Metric shanks.

OTM
Wapakoneta, OH 45895
Jun 04, 2002 Aluminum Cutting Inserts are available in WCGT 05 and WCGT 06 sizes to mount into existing OTM HOLESHOTâ„¢ and HOLESHOTâ„¢-IS (Integral Shank) drills. Available in grade 12, inserts feature highly polished surfaces and up-sharp geometry for drilling aluminum. Their polished surfaces reduce coefficient of friction for drilling in soft, gummy material.

D-M-E Company
Madison Heights, MI 48071-2383
May 16, 2002 Master Unit Die (MUD) Enhanced Series Mold Inserts have guide ejection system design, maximizing available insert core and cavity surface area. Guidepost retains and guides ejection system, and provides support without additional support pillars. Inserts are available in popular 08/09 insert thicknesses. They come with 4 leader pins, bushings, and return pins. Parting line plates are finish-ground and bolted to ear plates on laminated construction mold inserts.

Emhart Teknologies, A Black & Decker Co.
Shelton, CT 06484
May 16, 2002 Stainless steel Heli-Coil inserts, manufactured to military and metric aerospace standards, eliminate need for applying zinc chromate primer. Resin-bonded, fluoropolymer coating creates barrier between insert and parent material. Coating also provides additional lubricity, easing installation in anodized and chemically treated holes and allowing for consistent prevailing torque with screw-lock inserts. Corrosion inhibitors resist fungus growth.

Spirol International Corp.
Danielson, CT 06239 1434
May 16, 2002 Series 50 through-hole and Series 51 headed, through-hole press-in brass inserts can be cold pressed into plastic without heat or ultrasonic equipment. Inserts have helical knurl that optimizes plastic migration, providing good pull-out and torque resistance. Inserts can be installed with arbor press or fully automated machine into ABS and polycarbonate plastics. Applications include securing circuit boards and displays onto plastic housings.

Stellram
La Vergne, TN 37086
May 10, 2002 X500 milling grade inserts are suitable for machining PH stainless steels, high-temperature alloys, titanium, and alpha and beta titanium alloys, as well as iron, cobalt, and nickel-based metals. Substrate and coating combination increases transverse rupture strength up to 25% with improved thermal stability, providing faster cutting feed rates and increasing parts per edge. In one application, parts per insert increased over 600%.

Kennametal Inc., Advanced Materials Div.
Latrobe, PA 15650-0231
Apr 17, 2002 Fix-Perfect finishing cutters and inserts are for cast iron milling. Radial negative, axial positive rake angle makes chipload of 0.020 in./tooth possible. Inserts have 4 cutting edges and are offered in 2 grades. K110M is uncoated K10 class grade designed for machining speeds of 500 to 1000 sfm. KC520M is K15 class TiAIN coated grade designed for machining speeds from 600 to 1250 sfm. Cutters are available in diameters from 2.5 to 10 in. and 63 to 250 mm.

DeJay Industries
Richardson, TX 75081
Apr 10, 2002 Threaded inserts are made from stainless steel bar stock and have outside dimensions of 0.630 in. square. Two flanges spaced 0.065 in. apart allow for mounting to equipment. Parts have internal 1/4-20 UNC thread to accept male threaded part. Dimensions are held to ±0.005 in.

Sandvik Coromant Co.
Fair Lawn, NJ 07410
Apr 10, 2002 CoroCut(R) parting and grooving tools provide good surface finish and have 20 to 40% longer tool life than previous tools. They withstand high axial cutting forces, maximize feed without vibration, and work on materials ranging from aluminum to hardened steels and heat resistant super alloys (HRSAs). Tools are available in Grade H10 carbide, in PVD-TiAIN coated carbide grades, and in four geometries. Variety of toolholders and bars are available.

Kaiser Tool Co., Inc.
Fort Wayne, IN 46898
Apr 08, 2002 GROOVE 'N TURN(TM) inserts are available in 2 sub-micron grain carbide grades, DM-2(R) for steel and interrupted cutting, and DM-5(R) for aluminum and other non-ferrous alloys. Groove width sizes include .020, .030, .040, .060, .080, .100, and .125 in. with either sharp corners or .007 in. corner radius. Uncoated and TiN coated inserts are in stock. TiCN, TiAIN and diamond coatings are also available.

Valenite, Inc.
Madison Heights, MI 48071 9636
Mar 26, 2002 Fine-grain, silicon-nitride Quantum Q60 is formulated for high-speed rough turning and both rough and finish milling of cast irons. Speeds range from 1000 to 3800 sfm depending on depth of cut. Q60 is available in all types of turning and milling geometries. For finish turning, wiper radius insert geometry is available.

Spirol International Corp.
Danielson, CT 06239 1434
Mar 20, 2002 Series 40 through-hole and Series 44 blind-end hexagonal, molded-in, brass inserts are suitable for placement in plastic molds prior to plastic injection. They do not require specialized insertion tools, and are manufactured to simplify orientation and placement onto mold core pins. Hexagonal head provides bi-directional torque resistance and large undercut provides high-tensile strength.

Brighton N C Machine Corp.
Brighton, MI 48116
Mar 20, 2002 Final Cut castings eliminate need for pavement removal around street castings. Cover and rim elevation of manholes, catch basins, and hand holes can be raised by 1 1/2 in., regardless of thickness of cover. Cast iron construction provides corrosion resistance and durability. Combination of Final Cut rim, riser and cover allows use of BMPs for control of erosion and sedimentation.

Valenite, Inc.
Madison Heights, MI 48071 9636
Mar 12, 2002 SpectraTurn(TM)and SprectraMill(TM) inserts are coated with TiAln or AlTiN for edge strength and wear resistance. Heat produced in cutting process is carried away by chip. TiAlN coated insert grades are suitable for dry milling and for high-speed turning. AlTiN coated inserts are ideal for milling titanium and titanium alloys.

TOWER FASTENERS CO., INC.
Holtsville, NY 11742
Mar 08, 2002 Kato Tangless(R) CoilThread(R) high-tension coil inserts are installed with hand, air-driven or electric tools featuring head that grips and drives insert. Bi-directional design eliminates need to orient each part, and does not require special tang break-off and tang removal tools. Inserts shrink when installed, and spring-like tension of coil locks inserts into place.

Spirol International Corp.
Danielson, CT 06239 1434
Feb 27, 2002 Suitable for strengthening plastic joints, Series 18 brass reverse expansion insert is used in applications where bolt enters insert from headless end rather than from headed end. Its head provides high level pull-through resistance and its diamond knurl provides directional torque resistance for bolt installation. Unit does not require any specialized insertion tools, so it can be installed by hand in factory or in field.