Renco Electronics, Inc.    Rockledge, FL 32955
May 25, 2012 Suited for use in push-pull converters as well as half- and full-bridge circuits, RL-9500 is designed with isolated primary winding, 1:1:1 turn ratio, and 3,000 V Hi-Pot. Product comes in space-conserving 18 mm profile package and is constructed to support operation from -40 to +130°C.

Dwyer Instruments, Inc.    Michigan City, IN 46361
May 03, 2012 Featuring amperage range of 30/60/120 A or 20/100/150 A, depending on model, Series SCT continuously measures current consumption of pumps, fans, boilers, solar panels, and chillers for energy monitoring. Current or voltage outputs can be scaled using slider switch to select from 3 factory set ranges. With response time of 2 sec, transformers deliver ±2% accuracy from 10-100% of selected range. Optional 10 A command relay can snap onto current switch, eliminating need to mount additional relay.

Larson Electronics, LLC    Kemp, TX 75143
Apr 30, 2012 With 500 V rating, Model EPL-TX-500-4-1MLED converts 220 V 50/60 Hz current to 120 Vac 50/60 Hz, distributes secondary output via four 20 A twist-lock explosionproof receptacles, and provides 10,000 lumens via 150 W explosionproof LED light, which is vertically adjustable. Dolly cart mounting configuration allows operators to roll entire unit into position and move it about as needed. With built-in hanging rack, operators can stow included 25 ft explosionproof cord.

Measurement Specialties, Inc.    Hampton, VA 23666
Apr 23, 2012 Manufactured under ISO9001 quality system, XS-B Linear Variable Differential Transformer (LVDT) has 3/16 in. dia, with custom design capability to diameters of 1/8 in., that allows grouping for high-density surface profile measurements in space-restricted applications. This position sensor, supplied in stainless steel housing, features electromagnetic shielding and resistance to shock and vibration. Standard operating temperature range is -67 to +302°F, with 430°F optional.

Hammond Power Solutions, Inc.    Baraboo, WI 53912
Apr 17, 2012 Suitable for primary and secondary connections from 50-3,000 VA or 30 A or coil face terminations over 3,000 VA or 30 A, HPS Fusion is enclosed in rugged TYPE 1 enclosure, allowing for easy mounting and installation via 4 mounting slots and 2 keyhole slots. Access to primary and secondary wiring compartment is facilitated by removable covers. Product is designed specifically for applications such as adjusting supply voltage to match load requirement or supplying motor control circuits.

SNC Manufacturing Co., Inc.    Oshkosh, WI 54902
Apr 03, 2012 Available in models from 50 Va to 5 KVa, Global Control Transformers provide operator safety by delivering stable output voltage while accommodating momentary current inrush that occurs when electromagnetic devices are energized. Single-phase units include pre-wired primary and secondary fuse blocks mounted on top. Backed by UL, CSA, cULus, and CE agency approval, transformers are available with temperature classes adjustable by Va to meet customer requirements.

Larson Electronics, LLC    Kemp, TX 75143
Mar 16, 2012 Converting 3-phase 480 Vac power to single-phase 120 and 240 Vac, 30 KVA Model MGS-30KVA-6X120-2X240 allows operation of equipment such as motors that require linear current and lighting/computers that require non-linear current. Portable unit distributes power through seven 120 V receptacles and 2 Hubble 50 A/240 V twist lock receptacles. Mounted on 1/8 in. thick diamond plate platform, system features weatherproof construction, heavy gauge square steel support frame, and integral skid pockets.

Renco Electronics, Inc.    Rockledge, FL 32955
Mar 01, 2012 Featuring encapsulated design and 3,750 V Hi-pot, Model RL-9740 is suited for use in industrial monitoring controls and switch mode power supply applications. Thru-Hole Current Transformer meets all IEC950 insulation and VDE requirements. Housed in 19 mm high package with 4 PCB pins, device operates from -40 to +130°C.

Larson Electronics, LLC    Kemp, TX 75143
Feb 24, 2012 With Model MGS-150KVA-480-10X100A, operators can tap into 480 V 3-phase power sources and step current down to 120/208Y output for powering variety of tools and equipment. Unit distributes 120 Vac single-phase through 4 GFI-protected receptacles and 208Y via ten 100 A ADR1044 outlets. Safe connection to 480 Vac is provided through 400 A fused ON/OFF main disconnect switch. Featuring 2 in. square steel cage, transformer has centrally located lifting eyelet and integral skid pockets for transport.

MPS Industries    Gardena, CA 90248
Jan 12, 2012 Intended for applications that have space, weight, and/or height restrictions, Planar Transformers combine low-profile planar magnetics, advanced winding geometry, and interleaving technology. Offering optimized heat dissipation and minimal leakage inductance, devices are suited for variety of uses in automotive, medical, military, aerospace, and telecom industries, including high switching frequency power supplies and high-current DC/DC converters.

M/A-COM Technology Solutions, Inc.    Lowell, MA 01851
Nov 21, 2011 MABA-000001-75KIT1 features 12 transformer models covering multiple impedance ratios and wind schematics. Transformer configurations include flux-coupled, transmission line, and auto transformer, and all parts in kit are SMT devices featuring ceramic, plastic, or FR4 substrates. Baluns meeting MoCA® and DOCSIS® requirements are also included, as is CD-ROM with datasheets, S-parameters, and application notes.

Larson Electronics, LLC    Kemp, TX 75143
Nov 15, 2011 With ability to convert 480 Vac 3-phase current to single-phase 120/208Y AC configuration, Model MGPD-SP-200-1D-45-2B allows operators to utilize generators or outside high voltage power sources when local or native power sources are unavailable. Portable 45 KVA unit makes 240 Vac available via two 100 A breakers for uninterrupted flow of usable power. Safe operation is achieved through inclusion of fusible NEMA-3R disconnect and 60 A fuses for positive power control and overload protection.

Fulham Worldwide    Hawthorne, CA 90250
Oct 10, 2011 Solid-state, dimmable PONY® Halogen Electronic Transformers are available in 60, 75, 150, and 300 W linear and 300 W circular units. Performing in ambient temperatures up to 50°C max, these 12 V, 50/60Hz transformers use UL recognized components and operate multiple dimming and non-dimming MR16 and MR11 lamps to stated wattage. Short circuit, overload, thermal protections are all standard.

Mini-Circuits    Brooklyn, NY 11235
Jul 01, 2011 Measuring 0.2 x 0.2 x 0.2 in., TRS1-23-75+ balanced-to-unbalanced 75 ohm transmission line transformer has wire welded, rectangular core design rated for up to 0.5 W max power. Additional characteristics include 0.3 dB typ amplitude unbalance and 20 dB typ return loss. Supplied in aqueous washable case, product is suitable for RoHS and tin/lead solder systems. Bandwidth covers CATV (forward and return), medical wireless and D2A/A2D, and other communications applications.

Signal Transformer Co., Inc.    Inwood, NY 11096
Jun 08, 2011 Comprised of 300, 650, or 1,000 Va rated parts, chassis mount MTT Machine Builder Series features double reinforced insulation and leakage of less than 100 µA. Users can obtain 120, 12, and 24 V output voltages from single transformer powered directly by 3-phase, 3-wire distribution systems having no neutral leg. Devices with dual primaries are supplied for applications requiring connections across 208/240 V or 420/480 V 3-phase mains, as well as 220-240 V single-phase feeds.

Larson Electronics, LLC    Kemp, TX 75143
Jun 06, 2011 Mounted to coated steel frame with integrated skids, Magnalight MGS-15KVA-120-240-30AFT takes 480 Vac current and steps it down to 120 and 240 Vac commonly used with commercial power equipment. Transformer distributes 120 Vac through 10 GFCI protected receptacles and 240 Vac through 2 GFCI protected outlets, enabling multiple connections from 1 power source. Power is fed to fused ON/OFF disconnect switch via 20 ft of Line Power SO Cord, which manages power feed for 15 KVA, 480 V transformer.

Larson Electronics, LLC    Kemp, TX 75143
Apr 01, 2011 Model TX-500VA-4XAO provides .50 kVA and converts primary 120 Vac or 240 Vac electrical input into 12 or 24 Vdc and Vac output. It can also provide 12-24 Vdc or 12-24 Vac via secondary output equipped with four I-520 sockets that accept twist lock plugs. Adjustable voltage switch, which compensates for losses with long extension cords, and 2 GFCI protected outlets are included. Unit also has elevated base platform for protection against standing water as well as weatherproof construction.

Carlo Gavazzi, Inc.    Buffalo Grove, IL 60089
Mar 22, 2011 Designed to facilitate installation, CTD Series can connect with all types of wiring terminals. It installs on DIN-rail or directly to back panel, enabling bridging of secondary without changing connections and avoiding dangerous overvoltages. With burden as low as 0.5 VA, products offer primary currents from 0-40 through 0-3,200 Aac and secondary currents of 1 or 5 Aac. Other features include 2-10 bus-bar isolating fixing screws and double screw terminals for up to 8 wiring connections.

Honeywell International, Inc.    Morristown, NJ 07960
Mar 16, 2011 Providing non-contact rotary and angle position sensing, Hawk(TM) 1-Inch Series delivers ±7 arcmin accuracy for precise motion control. Fully housed configuration with bearing/shaft has 1 in. outer diameter, allowing use in size-restricted applications. Operating from -60 to 200°F, resolvers offer single speed operation for angle resolution over 360°+ range, excitation frequency of 2,000-5,000 Hz, excitation voltage of 2-15 V, and transformation ratio of 0.45 or 1.0.

Ion Physics Corp.    Fremont, NH 03044
Feb 10, 2011 Electrostatically shielded CM-01-CS11 measures narrow current pulse of several hundred kA and AC currents up to 2,000 ARMS with 3 dB bandwidth of 0.1 Hz to 100 kHz. One turn primary is internally terminated in low inductance impedance network to convert current signal to voltage signal. Offering 1 mV/A sensitivity, monitor senses magnetic field surrounding primary current carrying cable or charged particle stream. Saturation limit is 250 A, usable risetime is 4 µsec, and droop is 0.1%/ms.