New Transformers Products

Siemens Mobile Transformers are Increasing the Stability of New York's Power Grid

Extra-high-voltage transformers installed with utility ConEd in record time – just 30 work hours over three days Novel plug-and-play transformers for emergency response Siemens and Con Edison of New York, Inc. have successfully installed an innovative and versatile plug-and-play mobile resilience power transformer in record time. While it usually takes several weeks to transport and install a...

Industrial Control Transformers come with finger safe fuse terminal.

Used in process control, material handling, buidling automation and motors, Series-HG Industrial Control Transformers offer 208/277/380VAC input and 120/240VAC secondary output voltage. Available in 25-5000 VA rating, units are impregnated in high grade class varnish. Operated in -20°C to 40°C temperature range, transformers meet NEMA, ANSI, NMBTA and NFPA standards. Transformer's primary and...

SMD Transformer Provides 3,750 Volt RMS Isolation for Embedded Circuits, Battery Monitors

The Sumida ESMIT-4180/C Series Isolation Transformer is the latest entry into Sumida’s line of low-profile, surface mounted isolation transformers. It was developed to better respond to the demands of the embedded-circuit based products, including automotive battery monitoring, high-speed modems and other circuits. As an example, the ESMIT-4180/C is included in the reference design for the NXP...

TX-1000-DC Power Transformer features elevated base platform.

Encapsulated in NEMA 3R rated waterproof enclosure, TX-1000-DC Power Transformers convert 120/240 volts AC to 12 or 24 volts DC. Suitable for powering low voltage lighting and equipment, units deliver 12 volts DC at 83 amps or 24 volts DC at 41 amps output. Measuring 25 in. tall, 14 in. wide and 11 in. deep, transformers provide minimal interference with wireless radio receivers. Units accept 120...

A Guide to the Non-Metallic Precision Stamping Process

This white paper provides a guide to the non-Metallic precision stamping process.

Series-AG Industrial Control Transformers feature IEC touch proof terminals.

Available in 25-5000 VA rating, Series-AG Industrial Control Transformers are used in control panels, factory automation, process control and motors. Impregnated in high grade class varnish, Series-AG Transformers offer 240/480VAC primary and 120/240 VAC secondary voltage. Unit’s primary and secondary winding are separated by bobbin flange. Operated in -20°C to 40°C temperature range,...

UI Series Transformer offers low electromagnetic interference.

Suitable for LED lighting, electric metering and motor control, ands SELV and PELV circuit applications, UI Series Transformer offers Inherently Short-Circuit protection. Delivering 0.8VA-70VA power with 50/60Hz frequency and 4000Vrms Dielectric strength, unit features vacuum potted impregnation. Approved to TUV/CE in EN61558/EN60950 and UL 506, 5085-1, 5085-2 standards, and units are ROHS...

TPL-2516 Series Transformers feature split primary design.

Optimized for PFC derived switchmode power supplies and full-bridge / half-bridge converters, TPL-2516 Series Transformers are rated to 22.0 A current and 3 W of power dissipation. Operating at -55°C to +130°C, units are operated in 100 kHz to 500 kHz frequency range and provide leakage reactance of 1.30 µH. Featuring low 16.51 mm maximum profile, transformers meet MIL-PRF-27 standards and...

EI Series Power Transformers feature vacuum potted impregnation.

Offering VA power ranges from 0.6 VA to 36VA, EI Series encapsulated power transformers operate at frequency of 50/60Hz. Meeting Class B (130C) temperature class ratings, unit provides 4000Vrms dielectric strength. With dual input and dual output voltage for series or parallel connection, device meets UL 506, 5085-1, 5085-2 certifications. With low EMI (electromagnetic interference), transformers...

Distribution Transformers feature completely enclosed design.

Available in 480 Vac and 600 Vac models and in 3–15 kVA sizes, Acme Electric's Dry-Type 3-Phase Transformers are NEMA 3R rated for dust or lint-laden atmospheres and are suitable for indoor and outdoor use. Units are completely enclosed and feature fully encapsulated core and coil, copper lead wire terminations, electrostatic shield, and grounding studs for use with non-metallic conduit....

HPS Will Be Exhibiting at Automation Fair® 2016

GUELPH, ON- – Hammond Power Solutions (HPS) will be exhibiting for the sixth consecutive year at the Automation Fair-® event presented by Rockwell Automation. This year’s event is being held at the Georgia World Congress Center in Atlanta, Georgia, on November 9 and 10. The Automation Fair event provides attendees and exhibitors alike with an opportunity to- discover manufacturing...

How SpinSelect Can Save You Time and Money

Thanks to the unique SpinSelect™ Multi-Pocket selectable quick change tool holder, it's time to rethink the range, complexity and volume of parts that your lathe can produce. Our Spin-Select™ tool was created to increase productivity and consistency by decreasing downtime associated with lathe cutting tool and insert setups or changeovers. This product is a game-changer for the industry and we're pleased to show you why.