Transformers

Power Transformers offer 4 KV isolation, low-voltage step-down.
Transformers

Power Transformers offer 4 KV isolation, low-voltage step-down.

Offered with resettable over-temperature protection, single medical-grade toroidal isolation transformers of VPM Series are UL recognized and rated from 25 VA to 10 KVA, 50/60Hz. Class F insulation with resettable over-temperature protectionÂ- promotes reliability, and shielded toroidal construction with flux band reduces stray fields while minimizing size and increasing efficiency....

Read More »
Encapsulated Power Transformers are designed for cool operation.
Transformers

Encapsulated Power Transformers are designed for cool operation.

Targeting such applications as LED lighting, electric metering, motor controls, and thermostats, BV series carries Class 2 UL ratings and offers output loads from 0.6–10 VA. Winding efficiency and vacuum-sealed epoxy processes lend to thermal characteristics that enable cooler operation in continuous duty and surge testing. Surge withstand capability of 14 kVÂ- is made possible via...

Read More »
Power Distribution Substation uses two 75 KVA transformers.
Power Distribution Systems

Power Distribution Substation uses two 75 KVA transformers.

Mounted on powder coated, carbon steel frame with integrated skid pockets and lifting eyelets, Model MGS-1X480.200-2X75K-2X208.200 withstands demanding conditions and heavy-duty industrial applications.Â- On primary side, customized distribution panel has 480 V Delta line-in Russell Stoll male pin and sleeve connector which provides power to two 75 KVA transformers. Transformers step 480 V...

Read More »
Transformers

Class 2 Transformers offer 346 Vac input configurations.

WithÂ- 38 added input configurations to meet unique requirements, Class 2 Approved Transformers offer power ratings from 5–40 VA. Units are available with multiple primary and secondary windings, inherently or non-inherently limited for PCB mount, solder/quick connect terminals, and lead wires. Transformers feature Class F (155°C) insulation system, UL 94V0 flammability rating, and...

Read More »
Power Distribution Substation suits heavy-duty applications.
Power Distribution Systems

Power Distribution Substation suits heavy-duty applications.

With Model MGS-45K-3X240.30A-240.50A-5X120, users can convert 480 V 3-phase to 120 and 240 V 3-phase to operate tools and equipment. On primary side, 60 A fused 480 V disconnect provides protection for 45 KVA transformer. Secondary side features 100 A main breaker that provides protection for five 20 A/120 V 5-20 receptacles, one 30 A L5-30 receptacle, and one 50 A CS8369 receptacle. Mounted on...

Read More »
Transformers

Class 2 Transformers feature 277 Vac input configurations.

Available with 5–40 VAÂ- ratings, transformers include 38 Class 2-approved input configurations designed as drop-in replacements for major brands. Models can be provided as inherently or non-inherently limited (for externally fused applications) for PCB mount and are available with multiple primary and secondary windings, solder/quick connect terminals, and lead...

Read More »
Transformers

Distribution Transformers comply with DOE 10 CFR Part 431.

Supplied in type 3R heavy-duty enclosure, HPS Low Voltage and Medium Voltage Distribution Transformers are available with voltage from 15-1,000 kVA and 15-1,500 kVA, respectively.Â- HPS Sentinel and HPS Millennium products feature optimized BIL ratings for reliability and protection against critical equipment failure. Constructed for indoor or outdoor applications, transformers...

Read More »
Harsh Environment Class 2 Transformer aids field installation.
Power Supplies

Harsh Environment Class 2 Transformer aids field installation.

Encapsulated with UL 94VO flame retardant epoxy and housed inÂ- 304 Stainless Steel enclosure, model 14359 UL/C-UL Listed Class 2 Transformer accepts line voltages of 120, 208, 240, and 480 V, 50/60 Hz. Integral wiring compartment simplifies field installations, and 24 V, 75 VA rating provides capacity for low voltage control applications. Integral wiring compartment has ½...

Read More »
Signal Transformer's M4L International Power Isolation Transformer Series Now Certified to an Array of UL, CSA, VDE and IEC Safety Standards
Transformers

Signal Transformer's M4L International Power Isolation Transformer Series Now Certified to an Array of UL, CSA, VDE and IEC Safety Standards

Parts are Uniquely Qualified for Use in a Wide Range of Electro-Medical Devices, Consumer Appliances and Commercial Applications Inwood, NY,Â- – Signal Transformer, a division of Bel Fuse Inc., (NASDAQ: BELFA and BELFB) today announced that its high efficiency M4L Series of International Power Isolation Transformers has expanded its certification to numerous UL Safety Standards, including...

Read More »
Power Transformers come in low-profile SMT package.
Transformers

Power Transformers come in low-profile SMT package.

Achieving 12 mm creepage in 17 x 16 x 7 mm surface mount package, PH9385 Series provides 5 KVrmsÂ- isolation for communications interfaces such as RS485, CAN, Modbus, and ProfiBus for automation, automotive, and smart grid applications. Transformers are built with Sidecar package that has coil inserted at one side of open package and high isolation pins placed on other side. Units are...

Read More »

All Topics