New Transformers Products

Power Transformers have VDE approval to 0805 standard.

SPW-3400 Series 2.4 VA power transformers have UL 1585 Class 2 and 3, UL 60950, and cUL CAN/CSA 22.2 No. 60950 recognition. Printed circuit mount power transformers are pin-for-pin compatible. Units offer dual winding primaries for 115/230 volts 50/60 Hz input voltage. Output voltages from dual secondaries range from 5.0 to 120 Vac at 2.4 VA. Package dimensions are 1.375 in. long by 1.310 in....

Current Transducer offers closed loop control.

DCSA Series loop powered, linear output current transformer provides output directly proportional to RMS AC current passing through external LCSC10T12 toroidal sensor. It provides either analog current or voltage: 4 to 20 mA, 1 to 5 Vdc, or 2 to 10 Vdc. Each unit is factory calibrated for monitoring (with LCSC10T12) 0 to 5, 0 to 10, 0 to 20, or 0 to 50 A. Transducer senses current draw on...

Single Hybrid Transformer has hipot rating of 1,500 VAC.

SPT-060 600ohm:600ohm transformer connects 2-wire port to 4-wire transmit and receive port. In single hybrid configuration, it delivers 35.0 dB minimum TransHybrid Balance over frequency range of 300 to 3500 Hz. SPT-060 meets FCC Part 68 longitudinal balance requirements. It has dimensions of 0.540 in. max length x 0.535 in. max width x 0.535 in. max height. Printed circuit board usage is minimal...

Toroidal Isolation Transformers work in medical equipment.

AW Series is recognized under one or both UL544 and IEC601-1 safety standards. Power ratings range from l00VA to 3000VA, 50/60Hz. Applications include image processing, analytical instrumentation, ultrasound imaging, power conditioners, heart rate, APEA and 02/CO2 monitors, and ECG analyzers. Toroidal transformers are 30-50% lighter and have lower output impedance than stacked laminated...

Guide to Fatigue Testing

Learn what fatigue testing is and how fatigue testing service providers can determine the longevity of a part or product.

Flyback Transformer is suitable for portable applications.

Model 4283-1200 Hi-Voltage Flyback Transformer powers portable applications that require up to 2000 Vrms. Encapsulation techniques and manufacturing processes were used to make 4283-1200 virtually corona free. Providing primary-to-secondary isolation of up to 12 KVdc, Model 4283-1200 is suitable for compact, high-voltage, low-power applications.

Transformers operate at 90% efficiency,

High efficiency R-Core transformers have silicon steel cores with two matched bobbins on each side that cancel each other's magnetic flux field, so countermeasures to reduce leakage flux are not needed. Transformers are 30% smaller, 30% thinner and 40% lighter than EI type transformers. Applications include office, A/V, CATV, and electronic equipment. Sizes are available from 5VA to 1000VA.

Transformers are for full rate or ADSL applications.

Engineered to match Texas Instruments' AC5 octal chipsets, Bel S560-6600-Z6 and S560-6600-CE transformers offer total harmonic distortion in EP10 packages. They are suited for Digital Subscriber Line Access Multiplexer equipment and may be specified for remote site Digital Loop Carrier multi-port applications. Devices feature electromagnetic interference suppression, operating temperature range...

Dual Transformers feature low profile.

TLP-1000 Series 1553 dual side-by-side tranformers satisfy height constraints of demanding PCB designs. They are 0.155 in. high, 0.930 in. long and 0.630 in. wide, and available in all popular ratios. Single, dual and triple-stub 1553 box couplers, in-line couplers and related hardware are also available.

Flyback Transformer features corona-free design.

Model 4283-1100 High-Voltage Transformer drives high impedance loads requiring up to 7,500 Vrms. Providing primary-to-secondary isolation up to 18 kVdc, unit is suitable for applications requiring high-voltage, low to medium power including industrial lasers, ion generators, cathode ray tube transformers and traveling wave tube power supplies. Model 4283-1100 is particularly reliable in...

Paratherm™ HR Heat Transfer Fluid: Higher Temperature Stability Leads to Longer Fluid Life

For the ultimate in heat transfer fluid performance, Paratherm offers HR Heat Transfer Fluid that is engineered specifically for closed loop liquid phase heating. When it comes to characteristics such as thermal stability and fluid degradation, Paratherm HR leads the industry in value and performance. See our video to learn how Paratherm is raising the bar for heat transfer fluids.