Anadigics, Inc.    Warren, NJ 07059
Dec 07, 2011 Engineered to deliver optimal range and throughput, AWM6268 comes in 4 x 4 x 1 mm package with integrated step attenuator as well as RF input and output impedance matching circuits. Solution meets UTRA adjacent channel power limits at +28 dBm output power and offers 33% power added efficiency at +28 dBm LTE output power. PA also meets WiMAX Spectrum Emissions Mask limits at +26 dBm output power and offers 2.5% EVM and 25% power added efficiency at +26 dBm WiMAX output power.

Pentek Inc.    Upper Saddle River, NJ 07458
Dec 06, 2011 Housed in 16.9 x 9.5 x 13.4 in. steel enclosure, Model RTR 2726 captures and plays back signals up to 700 MHz in shock- and vibration-prone environments such as vehicles, ships, and aircraft. System inlcudes built-in digital up- and down-converters, with record channels offering 16-bit, 200 MHz ADCs and playback channels offering 16-bit, 800 MHz DACs. Based on quad-core Intel Xeon® processor, system includes 8 hot-swappable solid-state disk drives in RAID configuration with up to 4 TB capacity.

Vishay Intertechnology, Inc.    Malvern, PA 19355 2143
Dec 06, 2011 Operating from -55 to +175°C with 50% voltage derating, TH4 HI-TMP® TANTAMOUNT® capacitors are AEC-Q200-qualified and come in molded package in 3 standard EIA-535BAAC case codes: B, C, and D. Capacitance ranges from 10-47 µF over voltage ratings from 6.3-16 Vdc, with capacitance tolerances of ±10% and ±20%. Suited for automotive and industrial applications, 100% surge current tested products comply with RoHS directive 2002/95/EC and are available with tin or gold terminations.

Altera Corporation    San Jose, CA 95134
Dec 06, 2011 Developed on 28 nm Low Power process, Arria® V FPGAs consume 100 mW of power at 10.3125 Gbps data rates. Four variants are available, allowing engineers to choose device that meets exact needs, with densities up to 503 K logic elements and optional embedded dual-core ARM® Cortex(TM)-A9 MPCore(TM) processor. FPGAs are suited for wireless, broadcast, and military applications, including 10G/40G linecards, in-studio mixers, and remote radio units.

Pepperl + Fuchs, Inc.    Twinsburg, OH 44087 2245
Dec 05, 2011 With read/write range up to 130 mm, IQT-F116-R4M-V1 RFID Read Head conforms to open 13.56 MHz ISO 15693 standard. Users can, in multi-drop applications, connect up to 30 RFID read heads together on one network and bring data back to PC or PLC. Two-wire RS485 connectivity and 200 mm M12 pigtail connectors facilitate connection and removal, while continuous read option, available for point-to-point applications, and low-profile design accommodate AGV use and shallow mounting conditions.

Samplify Systems, Inc.    Santa Clara, CA 95051
Dec 05, 2011 Configurable 32-channel digital receive beamformer, SAM2032, interfaces to 12-bit ADCs with 32 serialized LVDS inputs. Data-path consists of delay memory, cubic interpolation, and apodization weighting prior to summation of 32 channels. With tunable center frequency and programmable decimation filter bandwidth, optimal tracking filter throughout entire scan depth can be implemented. ASIC supports sampling rates up to 50 MHz and parallel beam processing using QuadBeam(TM) technology.

Murata Electronics North America, Inc.    Smyrna, GA 30080
Dec 02, 2011 Comprising SAW filter, power amplifier, and magnetic stabilizer in single 6.6 x 3.8 x 1.0 mm package, HFQPRAPCA Series supports Bands 5, 1, 25, and 13. Magnetic stabilizer, providing same function as isolator, enables modules to remain stable by controlling characteristics of load fluctuation caused by changes in impedance that can occur when user's hand, metal object, or other materials come close to antenna.

Hammond Manufacturing Company Limited    Cheektowaga, NY 14225
Dec 02, 2011 Measuring 5.23 in. across flats and 1.54 in. high, octagonal Model 1590TRP will house circular PCB up to 5.0 in. in diameter. Two 1.54 in. high trapezoidal 1590STP Models are available, one measuring 4.41 in. long, narrowing from 3.11-2.42 in., and another measuring 3.74 in. deep, narrowing from 5.95-4.79 in. Available in natural finish and in smooth gloss polyester powder paint, enclosures are environmentally sealed to IP54 and provide EMC screening.

Pentair, Inc.    Golden Valley, MN 55416
Dec 02, 2011 Suited for military use, Calmark/Birtcher VITA 1.6-compliant keying system can also be used in IEEE 1101.10 non-conduction-cooled applications where there is no front panel. Coding system ensures PCBs are inserted into correct slots, allowing reliable operation despite demanding environments. Mating halves of Schroff coding keys are attached to rear edge of board and backplane of system, promoting efficient use of space. Coding keys come in 6 configurations per coding bracket set.

Vishay Intertechnology, Inc.    Malvern, PA 19355 2143
Dec 02, 2011 Optimized for multi-chip modules in down-hole drilling instrumentation, CHPHT resistors can operate from -55 to +230°C and be stored from -55 to +245°C. Resistance ranges from 0.1 W to 100 MW; available tolerances include 1%, 2%, and 5%; and power dissipation ranges from 12.5-100 mW at +230°C. Sfernice resistor is available with gold terminations for compatibility with high melting point processes for temperatures to +245°C and with tin/silver terminations for temperatures to +200°C.

Touchstone Semiconductor    Milpitas, CA 95035
Dec 01, 2011 Supplied in 5-pin SOT23 package, TS1100 has +1.6 to +25 V input common-mode voltage range, 30 µV tight offset, and 1 µA supply current rating. There are 4 gain options available - 25, 50, 100, and 200 V/V - to accommodate application requirements, and gain error is less than 0.5% (max). Suited for low-current, high-side current-sensing amplification, product is specified for operation from -40 to +105°C and is suited for battery-powered, remote, and hand-held portable instruments.

Weidmuller, Inc.    Richmond, VA 23236
Nov 30, 2011 With ratings up to 1,000 V/100 A and wire gauges from 26-3 AWG, ST Series is suitable for current transformer applications where operator risks potential exposure to high voltages. Modules feature hinged shroud and self-locking captive fastener, as well as jumper/bridging channel to distribute voltage and signals and combi-foot design for TS-32 and TS-35 DIN-rail mounting. Optional integrated test socket screw head allows user to insert current meter without circuit disruption.

Ohmite Mfg.    Rolling Meadows, IL 60008
Nov 30, 2011 Supplied in 0805, 1206, and 2512 package sizes, HVC Series includes 23 models with resistance values from 100 kW to 100 GW, standard TCR of 100 ppm, and standard tolerance of 5%. Voltage coefficients range from 10-100, depending on resistance value. Operating from -55 to +155°C, wrap around terminal chip resistors have matte tin contact with nickel barriers. Units do not contain organic compounds, making them suitable for vacuum applications.

AR RF/Microwave Instrumentation    Souderton, PA 18964
Nov 30, 2011 Featuring air-cooled, solid-state design, 600 W Model 600A225 is equipped with digital control panel that provides both local and remote control using IEEE, RS-232, USB, and Ethernet interfaces. Panel features 3.75 in. diagonal graphic display, menu-assigned softkeys, and single rotary knob as well as 4 dedicated switches for extensive control and status reporting capabilities. Typical applications include RF susceptibility testing, antenna testing, watt meter calibration, and plasma generation.

Mini-Circuits    Brooklyn, NY 11235
Nov 30, 2011 RMK series x3 frequency multipliers simplify LO generation in microwave point-to-point and point-to-multipoint systems by offering output frequencies to 15 GHz while utilizing common package and pin out. Also available, KSX Series X2 Frequency Multipliers function up to 20 GHz. LTCC-based circuits drive balanced diodes, creating miniature series of X2 passive multipliers that extend useful frequency range of oscillators and synthesizers.

Vishay Intertechnology, Inc.    Malvern, PA 19355 2143
Nov 30, 2011 With max rated voltage of 80 Vdc, Models ICM-2824, ICM-3528, and ICM-4743 feature low DC resistance from 0.006-0.015 W at rated currents from 8.0 A down to 4.0 A, and common-mode impedance ranging from 300-1,500 W at 100 MHz. All models operate from -25 to +85°C with insulation resistance of 10 MW. Devices provide noise suppression for power line applications in LANs, PCs, CD-ROM drives, telephones, and electronic games.

Texas Instruments, Inc. (TI)    Dallas, TX 75243-4136
Nov 30, 2011 Delivering power dissipation below 7 mW, Sitara(TM) AM335x ARM Cortex-A8 Microprocessors include programmable real-time unit on-chip interface, enabling real-time industrial communications capability to support protocols such as EtherCAT®, Ethernet/IP, PROFIBUS®, PROFINET®, POWERLINK, and SERCOS III. Devices also include on-chip CAN, ADC, USB + PHY, and 2-port Gigabit Ethernet with IEEE1588 for network connectivity as well as connection to sensors, actuators, and motor control.

Vishay Precision Group    Malvern, PA 19355
Nov 29, 2011 Supplied in 1206/2010/2512 chip sizes, VSMF series 10 W to 125 kW resistance range, with tolerances to ±0.01%; power ratings to 400 mW at +70°C; and ability to withstand ESD to at least 25 kV. Flexible terminations, offering strain relief for increased reliability, eliminate problems of cracked substrates and board delamination. Additional characteristics include 1.0 ns rise time, thermal stabilization time of less than 1 sec, and current noise of 0.010 µVrms per volt of applied voltage.

Vishay Intertechnology, Inc.    Malvern, PA 19355 2143
Nov 29, 2011 Offered in 2 x 2 x 0.76 mm QFN package, Series VSOP383 and VSOP584 process IR remote control signals from discrete photodiodes. Units feature narrow band-pass filter for 36 and 38 kHz carrier frequencies and intelligent automatic gain control to suppress disturbances from light sources. Manufactured using CMOS technology, Series VSOP383 and VSOP584 operate from -25 to +85°C with supply voltage range of 2.7-5.5 V and supply current of 0.35 mA and 0.85 mA, respectively.

Kemet Electronics Corp.    Greenville, SC 29606
Nov 29, 2011 Suited for down-hole oil field exploration, Industrial Grade Pulse Detonation Series in C0G dielectric features capacitance range of 0.5 pF to 0.15 µF with tolerances of ±5, ±10, or ±20%. Surface mount devices exhibit no change in capacitance with respect to time and voltage, and negligible change in capacitance with reference to ambient temperature. Constructed of base metal electrode dielectric system, RoHS-compliant capacitors have 100% pure matte tin-plated termination finish.