Power Metal Strip Resistor delivers 15-100 mΩ resistance.
Housed in 0603 package, surface-mount Model WSL0603 provides tight tolerance of 1% and RTC values down to 75 ppm/Ã-
Read More »Rectifier features 7 W/in.-³ power density.
Measuring 11.2 x 4 x 1.61 in., CAR1212 delivers 104 A and supports 12 V bus architectures that power point-of-load converters for low- to mid-power datacom systems. Automatic fan speed control optimizes noise levels in sensitive office-environment applications, while IÃ-²C communication provides intelligent monitoring and control of critical parameters. Product also includes under/over...
Read More »OCXO comes in 1.0 x 0.8 x 0.5 in. enclosure.
Offered in SMT or through hole package, XO5183 series features close in phase noise performance of -90 dBc at 1 Hz offset for 10 MHz sinewave device; it can be as low as -100 dBc/Hz at 1 Hz offset for special applications. Products, offered from 10-120 MHz, deliver Ã-
Read More »Low Phase Noise OCXO comes in 1.0 x 1.0 x 0.5 in. package.
Hermetically sealed XO5083-022 matches industry standard thru-hole and SMD footprints and delivers phase noise performance of 165 dBc/Hz at 10 kHz offset. Requiring +12 V supply with sinewave output, it has frequency-temperature stability of Ã-
Read More »PCB Fabrication Notes Guide
The overall purpose of your fabrication notes is to enhance Design for Manufacturability for optimal PCB fabrication and assembly while maintaining applicable industry standards and regulations.
Read More »Chip Resistor Attenuators replace 3 discrete components.
Rated at 0.040 W, Model CZA04S features impedance of 50 Ω, while Model CZA06S is rated at 0.075 W with impedance values of 50, 75, 100, 300, and 600 Ω. Both surface mount units offer attenuation ranges and tolerance values of 1-5 dB at 0.3 dB (L) and 6-20 dB at 0.5 dB (H). They are suited for RF signal attenuation applications in telecom and mobile wireless products. Model CZA04S measures...
Read More »Chip Capacitors measure 0.087 x 0.049 x 0.039 in.
Housed in P case size, Solid Tantalum Series 572D offers capacitance ratings of 10 F at 10 WVdc and 33 F at 6.3 WVdc with tolerances of 10% and 20%. Units feature temperature range of -55 to +85Ã-
Read More »Ground Electrode Kit enables installation from ground level.
Designed to facilitate installation of 8 ft long ground rods, ERITECH Convenient Ground Electrode Kit contains two 4 ft, 5/8 in. dia ERITECH copperbonded ground rods; drive sleeve; ERITECH compression coupling; and ERITECH HAMMERLOCK grounding connector or CP58 grounding clamp. UL-Listed, NEC-Compliant kit is designed for No. 6 and 4 solid copper wire applications; kit with CP58 grounding clamp...
Read More »Integrated Circuit provides USB connectivity.
Measuring 2 x 1.6 in., USBwiz IC provides connection to SD media cards, USB thumb drives, or USB hard drives. It allows devices to talk to other USB devices such as printers, mice, keyboards, and joysticks. File-system chip includes FAT file system handling and, through commands over UART, SPI, or I2C, allows users to read/write files from thumb drive or SD/MMC card. UART runs as high as 921.6...
Read More »DC Motor Controller/Driver targets robotic vehicles.
Microcomputer-based, dual channel Model AX1500 directly drives up to 30 A on each channel at up to 40 V. Fitted on 4.2 x 4.2 in. board, controller accepts commands from R/C radio or serial port interface. Two channels can be operated independently or combined to set direction and rotation of vehicle. Intelligent current sensing and controlling limits each channel's power output to 30 A for...
Read More »Power Connectors withstand extreme environmental conditions.
Made of high copper content alloys, Mechanical Grounding/Power Connectors are suited for direct burial applications in earth or embedment in concrete. Units feature nut and bolt design to provide means for connecting copper cable to various applications.
Read More »ISO-Certified Plastic Injection Molding from Rodon
The Rodon Group is a proven leader in high-volume, close tolerance injection molding. We offer globally competitive, innovative manufacturing solutions for a broad range of industries. Check out our video to learn more.
Read More »