New Electronic Components & Devices Products

Surface Mount LEDs offer brightness levels to 25,000 mcd.

Surface mount technology LEDs in SML-LX1110xx-TR series are offered in red, yellow, green, and blue colors with typ brightness levels from 2,500-25,000 mcd at If = 350 mA. Internal reflective cavities maximize light output, and polarity mark facilitates identification and proper placement. Offered in RoHS-compliant, 0.394 x 0.394 in. PLCC-4 package, all colors are available with viewing angles...

Multi-Protocol Framer suits Ethernet over SONET/SDH systems.

EXtendAR 48M(TM) XRT95L53 maps and de-maps data traffic between SPI-3 interface and standard SONET/SDH interfaces. It supports 48 DS3/E3 and fractional DS3/E3 framers on single chip, as well as flexible encapsulation and framing features including GFP, LAPS, ATM, and PPP/BCP. Device terminates section overhead and line overhead on OC-48/STM-16, 4xOC-12/, 16xOC-3 interfaces. Standard 16-bit...

Wirewound Resistors are rated from 3-20 W at 70-

Ceramic-housed, commercial-grade Series PCB features spade lead, printed circuit board mountable terminations, and is available from 0.1 Ω to 1.25 KΩ with tolerances of 5% and 10%. Resistors are RoHS compliant with lead-free 100% matte tin terminations. Flameproof construction makes units suited for industrial equipment, power supplies, power controls, and motor controllers. Custom windings...

Connectors provide high current in small molded body.

Available in 5, 6, 7, and 8-pin models, M16 x 0.75 versafast cordsets and receptacles are offered with PVC flexlifeÃ-® cable to withstand rigorous industrial applications. All connectors provide IEC IP67 protection, and are rated for 125 Vac/Vdc with 8 A for 5-pin and 7 A for 6- through 8-pin units. Products are suited for food and beverage, pharmaceutical, and material handling industries,...

Tips for Managing Dangerous Dust in Manufacturing Facilities

This eBook covers important considerations when creating a dust management plan for your facility. For more information, download now.

Zero Delay Buffers operate at speeds to 175 MHz.

Designed for use with SDRAM modules, clock driver Models XRK32510 and XRK39910 accurately align feedback output to clock input signal ensuring zero delay through IC. Each device distributes 1 clock input to bank of 10 outputs, resulting in low-skew, low-jitter copies of each clock. Model XRK39910 offers 8 zero delay outputs with less than 250 ps of output-to-output skew, selectable positive or...

Ceramic Packages suit direct PCB mount applications.

Plated Copper on Thick Film technology permits manufacture of leadless ceramic chip carriers and packages larger than .75 in. Wrap-around interconnections eliminate use of leads and additional interface boards, and ensure connections can operate at frequencies above 32 GHz. Plugged via holes with resistance less than 1 mΩ provide for RF losses below .1 dB at 4 GHz. Depending on die size and...

Transmitter features 10 Vdc analog output.

Operating from -10 to +40Ã-¡Ãâ C at up to 95% RH, AST3IS isolation amplifier is designed for use with strain-gage transducers in hazardous areas without Zener barriers. DIN-rail mount unit has ADC capable of up to 8,300,000 counts. With built-in support for RS-485 and MODBUS RTU, transmitter can communicate with process control host without external hardware or additional software....

Inductor offers DCR down to 0.50 mOhm at 0.19 H.

Housed in 0.402 x 0.402 in. package with 0.157 in. profile, Model IHLP-4040DZ-15 handles high transient spikes without saturation and operates over frequency range up to 1 MHz. Saturation current and typical DCR values range up to 44 A and from 0.50-5.20 mΩ, respectively, over inductance range of 0.19-2 H. RoHS-compliant unit operates from -55 to +125Ã-

Device Programming System handles 1,400 devices/hr.

Designed for OEM/ODM or programming centers producing small or large batches in high volumes, offline Model PS588 supports Windows XP(TM) and can accommodate up to 48 programming sites from FlashCORE(TM) line, or 12 Universal Optima programmers, to address any device mix. Auto Teach feature automatically finds center of device, facilitating process of setting precision placement of new device...

Power Connector is rated for 300 A continuous service.

Designed as interconnection between 2 perpendicular power bus bars, Power Clip is suited for N+1 rectifier, power supply, and switching power supply applications. Because clip accepts solid .125 in. thick nickel or gold-plated rectangular bus bar tab, there is no need for mating connector. Product is UL approved for true hot plug current interruption of 100 A at 48 V and 200 A at 42 V using gold...

Dies & Stamping Services with Over 25 Years of Experience

PDS is an established leader in progressive die stamping, with a reputation for providing precision and value that dates back more than half a century. Through extensive capabilities and a staff of seasoned professionals, we set the standard for quality, delivering flexible services that can meet the needs of the most challenging requirements. See our video to learn more.