Mill-Max Mfg. Corp.    Oyster Bay, NY 11771
Mar 13, 2012 Made from brass alloy, 1508 SMT pin is designed for use as test point or low-profile, board-to-board connection. Base size provides stability and delivers secure solder connection to PCB, while tail/pin diameter of .018 in. makes pin suitable for plugging into range of standard Mill-Max receptacles or attaching test clip. Standard plating is gold for reliability, corrosion protection, and wear resistance; tin and tin/lead plating options are also available.

Rubyquartz, LLC.,    Aventura, FL 33160
Mar 13, 2012 Housed in 5.0 x 3.3 mm package, COM2 Series offer stability down to ±10 ppm over all-inclusive room plus temperature stability from -40 to +85°C in frequency range of 2.5-55 MHz. Operating voltage ranges from 1.8-5.0 Vdc at max of 7.0 Ma, depending on frequency and stability requirements. RoHS-compliant, non-temperature compensating oscillators are suited for Wireless LANs, where enable/disable function, low phase noise, and tight stability are prime design needs.

STMicroelectronics    Lexington, MA 02421
Mar 12, 2012 Based on ARM® Cortex(TM)-M0 embedded processor core running at 48 MHz, STM32 F0 Series provides up to 7 timers, suited for controlling heaters or motors. Series also integrates hardware support for consumer electronics control (CEC) included in HDMI interface. CEC kernel can be independently clocked by low-speed 32 kHz external clock or internal 8 MHz clock. Additional on-chip features include analog block comprising c12-bit 1 MS/sec ADC, 12-bit DAC, and 2 programmable I/O analog comparators.

Cissoid    Mont Saint Guibert 1435  Belgium
Mar 09, 2012 Supplied in 5 x 5.5 mm SMD ceramic TDFP, CHT-VEGA low dropout, linear, voltage regulator is suited for embedded power supplies that must survive high-temperature, harsh environments or that require extended lifetimes. Product operates from -55 to +225°C and delivers regulated output with up to 500 mA from 5 V ±10% input. Output voltage can be adjusted from 1.2-3.3 V, and total output voltage accuracy under all operating conditions is better than ±5%.

Saelig Co., Inc.    Pittsford, NY 14534
Mar 09, 2012 Featuring 16-bit resolution, 5 MHz Model PS4262 includes function/arbitrary waveform generator with sweep function to facilitate frequency response analysis. It also offers advanced scope capabilities, such as spectrum analysis, mask limit testing, math functions, reference waveforms, digital triggering, and serial decoding. Providing sampling rate of 10 MS/sec, oscilloscope can continuously stream data via USB at 1 MS/sec. Large 16 MS buffer allows waveform expansion and deep data discovery.

Calnetix    Cerritos, CA 90703
Mar 09, 2012 Featuring power amplifiers rated at 3,600 VA/channel, Insight(TM) 3600 provides control of advanced permanent magnet, bias magnet bearings in up to 5 axes. Sensor interface drives and demodulates up to 5 sensor coils, providing position of rotor in real-time, while DSP regulates power amplifier current to drive bearing actuators based on position sensor data. Graphical user interface enables programming, remote monitoring, and diagnostics of system.

Marvell Semiconductor Inc.    Santa Clara, CA 95054
Mar 09, 2012 Suited for TD-SCDMA and LTE markets, Marvell® PXA1802 multimode TD LTE modem chipset integrates TDD, FDD LTE, and TD-SCDMA technology onto single chip. Thin architecture includes DSP modem core; cellular baseband core; PWU; DMA; and external interfaces. Supporting next-generation LTE standards with Cat 4 150 Mbps downlink throughput and Release 8 TD-SCDMA High-Speed Packet Access (HSPA+), modem includes processor core with packet processing accelerators and L1/L2 caches.

Comtech Xicom Technology, Inc    Santa Clara, CA 95054
Mar 09, 2012 Weighing 56 lb, model XTD-750KHE antenna mountable traveling wave tube amplifier (TWTA) is designed for Ku-band SATCOM uplinks and draws 1,450 W at 270 W of linear RF output power. Complete serial M&C system is built into unit, and remote external controller is available to operate high power amplifier (HPA) from user-selected location. Suited for transportable applications, product delivers 750 W peak power performance.

Harting KGaA      Germany
Mar 08, 2012 Designed to facilitate circuit board production, Han-Fast® Lock requires only one contact point to make connection. Conductor lines are through-plated and given drill hole and supporting point. Han® Q 4/2 connector with pre-connected litz wires and circuit board contact can be supplied as pre-tested system and connected to circuit board. Han-Fast® Lock contact accommodates litz wires measuring up to 10 mm².

Texas Instruments, Inc., Semiconductors    Dallas, TX 75243
Mar 08, 2012 Designed to minimize power consumption of RF power amplifiers across all operating conditions, Model LM3242 supports up to 1 A and is compatible with 3G/4G applications, while Model LM3243 supports up to 2.5 A and is compatible with 2G/3G/4G applications. Devices dynamically adjust power delivered to PA based on how much power is actually needed. Both ICs achieve 95% efficiency and feature multiple modes of operation to maximize efficiency for all battery and output conditions.

Synaptics    Santa Clara, CA 95054
Mar 08, 2012 Designed for display integrated In-Cell capacitive touchscreens, ClearPad 3250 In-Cell solution integrates touch display, eliminating discrete touch sensor and enabling OEMs to develop thin smartphones. Device maximizes transmittance of display, which in turn minimizes power required for backlight. Chip is supported by Design Studio(TM)4 embedded with patented SignalClarity(TM) Technology, which optimizes tracking accuracy, finger separation, and environmental and electrical noise performance.

Texas Instruments, Inc. (TI)    Dallas, TX 75243-4136
Mar 08, 2012 Housed in 48-pin, LQFP package, PHYTER® TLK110 Single-Port 10/100 Ethernet Physical Layer offers minimal deterministic transmit/receive latency, which provides precise control for real-time applications. Device delivers error-free cable reach of 150 m, and features fast link loss detection time of less than 10 µs. Using mixed-signal processing to perform equalization, data recovery, and error correction, TLK110 achieves optimum operation over CAT 5 twisted-pair wiring.

Honeywell International, Inc.    Morristown, NJ 07960
Mar 08, 2012 Promoting flexibility for designs with tight space requirements, SS39ET Series comes in SOT-23 SMT package with subminiature footprint. IC responds to North and South poles and monitors magnetic fields from permanent magnet or electromagnet. Operating from 2.7-6.5 Vdc supply while consuming 6 mA at 5 Vdc, IC has thermally balanced design that provides stable operation over full -40 to +212°F operating range. Thin film resistors lend to accuracy and output stability.

Future Technology Devices International Limited    Glasgow G41 1HH  United Kingdom
Mar 07, 2012 Housed in SSOP, QFN, and DFN packages, X-Chip Series supports broad selection of interface types, such as basic UART, full UART, FIFO, and I2C, as well as FTDI's FT1248 I/O. Devices consume less than 8 mA when fully active and less than 125 µA in suspend mode. Built-in functionality detects charging port and causes logic to switch from data transfer to charging mode. Operating from -40 to +85°C, ICs have internal multi-time programmable memory for storage and configuration of device descriptors.

Z-Communications, Inc.    San Diego, CA 92126
Mar 07, 2012 Generating frequencies from 5,000-6,000 MHz, Model SMV5550B-LF features tuning voltage of 0-10 V and exhibits -80 dBc/Hz phase noise at 10 kHz from carrier. Voltage controlled oscillator delivers 3 ±3 dBm into 50 W load with nominal 5 V supply and 24 mA current. Housed in 0.3 x 0.3 x 0.08 in. SUB-L surface mount package, VCO operates from -40 to 85°C, exhibits second harmonic suppression of -35 dBc, and provides better than 1.1:1 tuning linearity.

Vishay Precision Group    Malvern, PA 19355
Mar 07, 2012 Compliant with EEE-INST-002 and MIL-PRF-83401, PRNDs are hermetically sealed networks consisting of multiple Bulk Metal® Foil hybrid chip resistors connected by gold-wire bonding inside ceramic packages. Devices provide low absolute TCR of ±2 ppm/°C from -55 to +125°C, +25°C ref and load-life stability to ±0.05%. Offered in DIP, flatpack, gull wing, and LCC package configurations, PRNDs feature power rating to 1.4 W and resistance range from 5 W per chip.

austriamicrosystems AG    Schloss Premstaetten A 8141  Austria
Mar 07, 2012 Supplied in 12-ball, 1.7 x 1.4 x 0.5 mm WL-CSP package with 0.4 mm pitch, AS3674 and AS3490 are inductive boost converters that exhibit 90% peak efficiency and require 4 external components. Able to control 5 current sources with each driving 2 LEDs in series, AS3674 is 2 MHz DC/DC switch mode step-up converter that allows current for LED channels to be set by external resistor with max of 25 mA per channel. With same functionality as AS3674, AS3490 addresses 3 LED channels.

Vishay Intertechnology, Inc.    Malvern, PA 19355 2143
Mar 06, 2012 Suited for harsh and high-temperature applications, MCW 0406 AT Series features resistance range of 47 W to 100 kW. Professional versions offer performance up to 175°C for 1,000 hr and power ratings of 300 mW at ambient temperature of 85°C, while Precision Series features TCR down to ±15 ppm/K and tolerances to ±0.1%. On 4-layer FR4 PCB, devices handle up to 2,500 cycles of rapid temperature change over span of -40 to 125°C.

STMicroelectronics    Lexington, MA 02421
Mar 05, 2012 Near Field Communications (NFC) controller, ST21NFCA, helps accelerate arrival of secure contactless apps and services accessible via Next-Gen smartphones. IC supports all NFC use cases and can coordinate multiple NFC secure apps stored in several secure locations, such as SWP-SIM and SWP-microSD Card or Embedded Secure Element. Corresponding NFC software stack, running on terminal host, supports all Google Android versions and will be available for MS Windows® 8 OS.

Richardson RFPD, Inc.    LaFox, IL 60147-0307
Mar 02, 2012 Designed to serve power inverter applications in such harsh operating conditions as wind and PV installations, Spectrum Advanced Specialty Products' 55DC Link Series utilizes segmented, self-healing metallized polypropylene for life expectancy of 100,000+ hr. Products have been tested to environmental specifications of MIL-STD-202 and offer capacitance range of 160-680 µF and tolerance of ±10%. Series comes in aluminum housing with brass terminals.